Render video or camera viewfinder. More...

#include <qquickvideooutput_p.h>

Inheritance diagram for QQuickVideoOutput:

Collaboration diagram for QQuickVideoOutput:

Public Types
enum	FillMode { Stretch = Qt::IgnoreAspectRatio , PreserveAspectFit = Qt::KeepAspectRatio , PreserveAspectCrop = Qt::KeepAspectRatioByExpanding }

Public Types inherited from QQuickItem
enum	Flag { ItemClipsChildrenToShape = 0x01 , ItemIsFocusScope = 0x04 , ItemHasContents = 0x08 , ItemAcceptsDrops = 0x10 , ItemIsViewport = 0x20 , ItemObservesViewport = 0x40 }
	\qmltype Item \instantiates QQuickItem \inherits QtObject \inqmlmodule QtQuick More...

enum	ItemChange { ItemChildAddedChange , ItemChildRemovedChange , ItemSceneChange , ItemVisibleHasChanged , ItemParentHasChanged , ItemOpacityHasChanged , ItemActiveFocusHasChanged , ItemRotationHasChanged , ItemAntialiasingHasChanged , ItemDevicePixelRatioHasChanged , ItemEnabledHasChanged }
	Used in conjunction with QQuickItem::itemChange() to notify the item about certain types of changes. More...

enum	TransformOrigin { TopLeft , Top , TopRight , Left , Center , Right , BottomLeft , Bottom , BottomRight }
	\variable QQuickItem::ItemChangeData::realValue The numeric value that has changed: \l {QQuickItem::opacity()}{opacity}, \l {QQuickItem::rotation()}{rotation}, or \l {QScreen::devicePixelRatio}{device pixel ratio}. More...

Signals
void	sourceChanged ()

void	fillModeChanged (QQuickVideoOutput::FillMode)

void	orientationChanged ()

void	sourceRectChanged ()

void	contentRectChanged ()

Signals inherited from QQuickItem
void	childrenRectChanged (const QRectF &)

void	baselineOffsetChanged (qreal)

void	stateChanged (const QString &)

void	focusChanged (bool)

void	activeFocusChanged (bool)

Q_REVISION(6, 7) void focusPolicyChanged(Qt	Q_REVISION (2, 1) void activeFocusOnTabChanged(bool)

void	parentChanged (QQuickItem *)

void	transformOriginChanged (TransformOrigin)

void	smoothChanged (bool)

void	antialiasingChanged (bool)

void	clipChanged (bool)

	Q_REVISION (2, 1) void windowChanged(QQuickWindow *window)

void	childrenChanged ()

void	opacityChanged ()

void	enabledChanged ()

void	visibleChanged ()

void	visibleChildrenChanged ()

void	rotationChanged ()

void	scaleChanged ()

void	xChanged ()

void	yChanged ()

void	widthChanged ()

void	heightChanged ()

void	zChanged ()

void	implicitWidthChanged ()

void	implicitHeightChanged ()

	Q_REVISION (2, 11) void containmentMaskChanged()

	Q_REVISION (6, 0) void paletteChanged()

	Q_REVISION (6, 0) void paletteCreated()

Signals inherited from QObject
void	destroyed (QObject *=nullptr)
	This signal is emitted immediately before the object obj is destroyed, after any instances of QPointer have been notified, and cannot be blocked.

void	objectNameChanged (const QString &objectName, QPrivateSignal)
	This signal is emitted after the object's name has been changed.

Public Member Functions
	QQuickVideoOutput (QQuickItem *parent=0)

	~QQuickVideoOutput ()

Q_INVOKABLE QVideoSink *	videoSink () const
	\qmlproperty object QtMultimedia::VideoOutput::videoSink

FillMode	fillMode () const
	\qmlproperty enumeration QtMultimedia::VideoOutput::fillMode

void	setFillMode (FillMode mode)

int	orientation () const
	\qmlproperty int QtMultimedia::VideoOutput::orientation

void	setOrientation (int)

QRectF	sourceRect () const
	\qmlproperty rectangle QtMultimedia::VideoOutput::sourceRect

QRectF	contentRect () const
	\qmlproperty rectangle QtMultimedia::VideoOutput::contentRect

Public Member Functions inherited from QQuickItem
	QQuickItem (QQuickItem *parent=nullptr)
	Constructs a QQuickItem with the given parent.

	~QQuickItem () override
	Destroys the QQuickItem.

QQuickWindow *	window () const
	Returns the window in which this item is rendered.

QQuickItem *	parentItem () const

void	setParentItem (QQuickItem *parent)

void	stackBefore (const QQuickItem *)
	Moves the specified sibling item to the index before this item within the list of children.

void	stackAfter (const QQuickItem *)
	Moves the specified sibling item to the index after this item within the list of children.

QRectF	childrenRect ()
	\qmlpropertygroup QtQuick::Item::childrenRect \qmlproperty real QtQuick::Item::childrenRect.x \qmlproperty real QtQuick::Item::childrenRect.y \qmlproperty real QtQuick::Item::childrenRect.width \qmlproperty real QtQuick::Item::childrenRect.height \readonly

QList< QQuickItem * >	childItems () const
	Returns the children of this item.

bool	clip () const
	\qmlproperty bool QtQuick::Item::clip This property holds whether clipping is enabled.

void	setClip (bool)

QString	state () const
	\qmlproperty string QtQuick::Item::state

void	setState (const QString &)

qreal	baselineOffset () const
	\qmlproperty int QtQuick::Item::baselineOffset

void	setBaselineOffset (qreal)

QQmlListProperty< QQuickTransform >	transform ()

qreal	x () const

qreal	y () const

QPointF	position () const

void	setX (qreal)

void	setY (qreal)

void	setPosition (const QPointF &)

QBindable< qreal >	bindableX ()

QBindable< qreal >	bindableY ()

qreal	width () const

void	setWidth (qreal)

void	resetWidth ()

void	setImplicitWidth (qreal)

qreal	implicitWidth () const
	Returns the width of the item that is implied by other properties that determine the content.

QBindable< qreal >	bindableWidth ()

qreal	height () const

void	setHeight (qreal)

void	resetHeight ()

void	setImplicitHeight (qreal)

qreal	implicitHeight () const

QBindable< qreal >	bindableHeight ()

QSizeF	size () const

void	setSize (const QSizeF &size)

TransformOrigin	transformOrigin () const

void	setTransformOrigin (TransformOrigin)

QPointF	transformOriginPoint () const

void	setTransformOriginPoint (const QPointF &)

qreal	z () const

void	setZ (qreal)

qreal	rotation () const

void	setRotation (qreal)

qreal	scale () const

void	setScale (qreal)

qreal	opacity () const

void	setOpacity (qreal)

bool	isVisible () const

void	setVisible (bool)

bool	isEnabled () const

void	setEnabled (bool)

bool	smooth () const

void	setSmooth (bool)

bool	activeFocusOnTab () const
	\qmlproperty bool QtQuick::Item::activeFocusOnTab

void	setActiveFocusOnTab (bool)

bool	antialiasing () const

void	setAntialiasing (bool)

void	resetAntialiasing ()

Flags	flags () const
	Returns the item flags for this item.

void	setFlag (Flag flag, bool enabled=true)
	Enables the specified flag for this item if enabled is true; if enabled is false, the flag is disabled.

void	setFlags (Flags flags)
	Enables the specified flags for this item.

virtual QRectF	boundingRect () const
	Returns the extents of the item in its own coordinate system: a rectangle from {0, 0} to \l width() and \l height().

virtual QRectF	clipRect () const
	Returns the rectangular area within this item that is currently visible in \l viewportItem(), if there is a viewport and the \l ItemObservesViewport flag is set; otherwise, the extents of this item in its own coordinate system: a rectangle from {0, 0} to \l width() and \l height().

QQuickItem *	viewportItem () const
	If the \l ItemObservesViewport flag is set, returns the nearest parent with the \l ItemIsViewport flag.

bool	hasActiveFocus () const

bool	hasFocus () const

void	setFocus (bool)

void	setFocus (bool focus, Qt::FocusReason reason)

bool	isFocusScope () const
	Returns true if this item is a focus scope, and false otherwise.

QQuickItem *	scopedFocusItem () const
	If this item is a focus scope, this returns the item in its focus chain that currently has focus.

Qt::FocusPolicy	focusPolicy () const

void	setFocusPolicy (Qt::FocusPolicy policy)
	Sets the focus policy of this item to policy.

bool	isAncestorOf (const QQuickItem *child) const
	Returns `true` if this item is an ancestor of child (i.e., if this item is child's parent, or one of child's parent's ancestors).

Qt::MouseButtons	acceptedMouseButtons () const
	Returns the mouse buttons accepted by this item.

void	setAcceptedMouseButtons (Qt::MouseButtons buttons)
	Sets the mouse buttons accepted by this item to buttons.

bool	acceptHoverEvents () const
	Returns whether hover events are accepted by this item.

void	setAcceptHoverEvents (bool enabled)
	If enabled is true, this sets the item to accept hover events; otherwise, hover events are not accepted by this item.

bool	acceptTouchEvents () const
	Returns whether touch events are accepted by this item.

void	setAcceptTouchEvents (bool accept)
	If enabled is true, this sets the item to accept touch events; otherwise, touch events are not accepted by this item.

bool	isUnderMouse () const

void	grabMouse ()

void	ungrabMouse ()

bool	keepMouseGrab () const
	Returns whether mouse input should exclusively remain with this item.

void	setKeepMouseGrab (bool)
	Sets whether the mouse input should remain exclusively with this item.

bool	filtersChildMouseEvents () const
	Returns whether pointer events intended for this item's children should be filtered through this item.

void	setFiltersChildMouseEvents (bool filter)
	Sets whether pointer events intended for this item's children should be filtered through this item.

void	grabTouchPoints (const QList< int > &ids)

void	ungrabTouchPoints ()

bool	keepTouchGrab () const
	Returns whether the touch points grabbed by this item should exclusively remain with this item.

void	setKeepTouchGrab (bool)
	Sets whether the touch points grabbed by this item should remain exclusively with this item.

	Q_REVISION (2, 4) Q_INVOKABLE bool grabToImage(const QJSValue &callback

QSharedPointer< QQuickItemGrabResult >	grabToImage (const QSize &targetSize=QSize())
	Grabs the item into an in-memory image.

virtual Q_INVOKABLE bool	contains (const QPointF &point) const
	\qmlmethod bool QtQuick::Item::contains(point point)

QObject *	containmentMask () const

void	setContainmentMask (QObject *mask)

QTransform	itemTransform (QQuickItem , bool ) const
	\qmlmethod point QtQuick::Item::mapFromItem(Item item, real x, real y) \qmlmethod point QtQuick::Item::mapFromItem(Item item, point p) \qmlmethod rect QtQuick::Item::mapFromItem(Item item, real x, real y, real width, real height) \qmlmethod rect QtQuick::Item::mapFromItem(Item item, rect r)

QPointF	mapToScene (const QPointF &point) const
	Maps the given point in this item's coordinate system to the equivalent point within the scene's coordinate system, and returns the mapped coordinate.

QRectF	mapRectToItem (const QQuickItem *item, const QRectF &rect) const
	Maps the given rect in this item's coordinate system to the equivalent rectangular area within item's coordinate system, and returns the mapped rectangle value.

QRectF	mapRectToScene (const QRectF &rect) const
	Maps the given rect in this item's coordinate system to the equivalent rectangular area within the scene's coordinate system, and returns the mapped rectangle value.

QPointF	mapFromScene (const QPointF &point) const
	Maps the given point in the scene's coordinate system to the equivalent point within this item's coordinate system, and returns the mapped coordinate.

QRectF	mapRectFromItem (const QQuickItem *item, const QRectF &rect) const
	Maps the given rect in item's coordinate system to the equivalent rectangular area within this item's coordinate system, and returns the mapped rectangle value.

QRectF	mapRectFromScene (const QRectF &rect) const
	Maps the given rect in the scene's coordinate system to the equivalent rectangular area within this item's coordinate system, and returns the mapped rectangle value.

void	polish ()
	Schedules a polish event for this item.

Q_INVOKABLE QPointF	mapFromItem (const QQuickItem *item, const QPointF &point) const
	Maps the given point in item's coordinate system to the equivalent point within this item's coordinate system, and returns the mapped coordinate.

Q_INVOKABLE QPointF	mapFromItem (const QQuickItem *item, qreal x, qreal y)

Q_INVOKABLE QRectF	mapFromItem (const QQuickItem *item, const QRectF &rect) const

Q_INVOKABLE QRectF	mapFromItem (const QQuickItem *item, qreal x, qreal y, qreal width, qreal height) const

Q_INVOKABLE QPointF	mapToItem (const QQuickItem *item, const QPointF &point) const
	Maps the given point in this item's coordinate system to the equivalent point within item's coordinate system, and returns the mapped coordinate.

Q_INVOKABLE QPointF	mapToItem (const QQuickItem *item, qreal x, qreal y)

Q_INVOKABLE QRectF	mapToItem (const QQuickItem *item, const QRectF &rect) const

Q_INVOKABLE QRectF	mapToItem (const QQuickItem *item, qreal x, qreal y, qreal width, qreal height) const

	Q_REVISION (2, 7) Q_INVOKABLE QPointF mapFromGlobal(qreal x

	Q_REVISION (2, 7) Q_INVOKABLE QPointF mapFromGlobal(const QPointF &point) const

	Q_REVISION (2, 7) Q_INVOKABLE QPointF mapToGlobal(qreal x

	Q_REVISION (2, 7) Q_INVOKABLE QPointF mapToGlobal(const QPointF &point) const

Q_INVOKABLE void	forceActiveFocus ()
	\qmlmethod point QtQuick::Item::mapToItem(Item item, real x, real y) \qmlmethod point QtQuick::Item::mapToItem(Item item, point p) \qmlmethod rect QtQuick::Item::mapToItem(Item item, real x, real y, real width, real height) \qmlmethod rect QtQuick::Item::mapToItem(Item item, rect r)

Q_INVOKABLE void	forceActiveFocus (Qt::FocusReason reason)
	\qmlmethod QtQuick::Item::forceActiveFocus(Qt::FocusReason reason) This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.Forces active focus on the item with the given reason.

	Q_REVISION (2, 1) Q_INVOKABLE QQuickItem *nextItemInFocusChain(bool forward

Q_INVOKABLE QQuickItem *	childAt (qreal x, qreal y) const
	\qmlmethod QtQuick::Item::childAt(real x, real y)

	Q_REVISION (6, 3) Q_INVOKABLE void ensurePolished()

	Q_REVISION (6, 3) Q_INVOKABLE void dumpItemTree() const

virtual bool	isTextureProvider () const
	Returns true if this item is a texture provider.

virtual QSGTextureProvider *	textureProvider () const
	Returns the texture provider for an item.

Public Member Functions inherited from QObject
Q_INVOKABLE	QObject (QObject *parent=nullptr)
	Constructs an object with parent object parent.

virtual	~QObject ()
	Destroys the object, deleting all its child objects.

virtual bool	eventFilter (QObject watched, QEvent event)
	Filters events if this object has been installed as an event filter for the watched object.

QString	objectName () const

Q_WEAK_OVERLOAD void	setObjectName (const QString &name)
	Sets the object's name to name.

void	setObjectName (QAnyStringView name)
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

QBindable< QString >	bindableObjectName ()

bool	isWidgetType () const
	Returns `true` if the object is a widget; otherwise returns `false`.

bool	isWindowType () const
	Returns `true` if the object is a window; otherwise returns `false`.

bool	isQuickItemType () const
	Returns `true` if the object is a QQuickItem; otherwise returns `false`.

bool	signalsBlocked () const noexcept
	Returns `true` if signals are blocked; otherwise returns `false`.

bool	blockSignals (bool b) noexcept
	If block is true, signals emitted by this object are blocked (i.e., emitting a signal will not invoke anything connected to it).

QThread *	thread () const
	Returns the thread in which the object lives.

bool	moveToThread (QThread *thread QT6_DECL_NEW_OVERLOAD_TAIL)
	Changes the thread affinity for this object and its children and returns `true` on success.

int	startTimer (int interval, Qt::TimerType timerType=Qt::CoarseTimer)
	This is an overloaded function that will start a timer of type timerType and a timeout of interval milliseconds.

int	startTimer (std::chrono::nanoseconds time, Qt::TimerType timerType=Qt::CoarseTimer)

void	killTimer (int id)
	Kills the timer with timer identifier, id.

void	killTimer (Qt::TimerId id)

template<typename T >
T	findChild (QAnyStringView aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	Returns the child of this object that can be cast into type T and that is called name, or \nullptr if there is no such object.

template<typename T >
QList< T >	findChildren (QAnyStringView aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects.

template<typename T >
T	findChild (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

template<typename T >
QList< T >	findChildren (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

const QObjectList &	children () const
	Returns a list of child objects.

void	setParent (QObject *parent)
	Makes the object a child of parent.

void	installEventFilter (QObject *filterObj)
	Installs an event filter filterObj on this object.

void	removeEventFilter (QObject *obj)
	Removes an event filter object obj from this object.

QMetaObject::Connection	connect (const QObject sender, const char signal, const char *member, Qt::ConnectionType type=Qt::AutoConnection) const

bool	disconnect (const char signal=nullptr, const QObject receiver=nullptr, const char *member=nullptr) const

bool	disconnect (const QObject receiver, const char member=nullptr) const

void	dumpObjectTree () const
	Dumps a tree of children to the debug output.

void	dumpObjectInfo () const
	Dumps information about signal connections, etc.

bool	setProperty (const char *name, const QVariant &value)
	Sets the value of the object's name property to value.

bool	setProperty (const char *name, QVariant &&value)

QVariant	property (const char *name) const
	Returns the value of the object's name property.

QList< QByteArray >	dynamicPropertyNames () const

QBindingStorage *	bindingStorage ()

const QBindingStorage *	bindingStorage () const

QObject *	parent () const
	Returns a pointer to the parent object.

bool	inherits (const char *classname) const
	Returns `true` if this object is an instance of a class that inherits className or a QObject subclass that inherits className; otherwise returns `false`.

Public Member Functions inherited from QQmlParserStatus
	QQmlParserStatus ()

virtual	~QQmlParserStatus ()

Protected Member Functions
QSGNode *	updatePaintNode (QSGNode , UpdatePaintNodeData ) override
	Called on the render thread when it is time to sync the state of the item with the scene graph.

void	itemChange (ItemChange change, const ItemChangeData &changeData) override
	Called when change occurs for this item.

void	geometryChange (const QRectF &newGeometry, const QRectF &oldGeometry) override

void	releaseResources () override
	This function is called when an item should release graphics resources which are not already managed by the nodes returned from QQuickItem::updatePaintNode().

Protected Member Functions inherited from QQuickItem
bool	event (QEvent *) override
	\reimp

bool	isComponentComplete () const
	Returns true if construction of the QML component is complete; otherwise returns false.

bool	widthValid () const
	Returns whether the width property has been set explicitly.

bool	heightValid () const
	Returns whether the height property has been set explicitly.

void	setImplicitSize (qreal, qreal)

void	classBegin () override
	\reimp Derived classes should call the base class method before adding their own action to perform at classBegin.

void	componentComplete () override
	\reimp Derived classes should call the base class method before adding their own actions to perform at componentComplete.

virtual void	keyPressEvent (QKeyEvent *event)
	This event handler can be reimplemented in a subclass to receive key press events for an item.

virtual void	keyReleaseEvent (QKeyEvent *event)
	This event handler can be reimplemented in a subclass to receive key release events for an item.

virtual void	focusInEvent (QFocusEvent *)
	This event handler can be reimplemented in a subclass to receive focus-in events for an item.

virtual void	focusOutEvent (QFocusEvent *)
	This event handler can be reimplemented in a subclass to receive focus-out events for an item.

virtual void	mousePressEvent (QMouseEvent *event)
	This event handler can be reimplemented in a subclass to receive mouse press events for an item.

virtual void	mouseMoveEvent (QMouseEvent *event)
	This event handler can be reimplemented in a subclass to receive mouse move events for an item.

virtual void	mouseReleaseEvent (QMouseEvent *event)
	This event handler can be reimplemented in a subclass to receive mouse release events for an item.

virtual void	mouseDoubleClickEvent (QMouseEvent *event)
	This event handler can be reimplemented in a subclass to receive mouse double-click events for an item.

virtual void	mouseUngrabEvent ()
	This event handler can be reimplemented in a subclass to be notified when a mouse ungrab event has occurred on this item.

virtual void	touchUngrabEvent ()
	This event handler can be reimplemented in a subclass to be notified when a touch ungrab event has occurred on this item.

virtual void	touchEvent (QTouchEvent *event)
	This event handler can be reimplemented in a subclass to receive touch events for an item.

virtual void	hoverEnterEvent (QHoverEvent *event)
	This event handler can be reimplemented in a subclass to receive hover-enter events for an item.

virtual void	hoverMoveEvent (QHoverEvent *event)
	This event handler can be reimplemented in a subclass to receive hover-move events for an item.

virtual void	hoverLeaveEvent (QHoverEvent *event)
	This event handler can be reimplemented in a subclass to receive hover-leave events for an item.

virtual bool	childMouseEventFilter (QQuickItem , QEvent )
	Reimplement this method to filter the pointer events that are received by this item's children.

virtual void	updatePolish ()
	This function should perform any layout as required for this item.

	QQuickItem (QQuickItemPrivate &dd, QQuickItem *parent=nullptr)

Protected Member Functions inherited from QObject
QObject *	sender () const
	Returns a pointer to the object that sent the signal, if called in a slot activated by a signal; otherwise it returns \nullptr.

int	senderSignalIndex () const

int	receivers (const char *signal) const
	Returns the number of receivers connected to the signal.

bool	isSignalConnected (const QMetaMethod &signal) const

virtual void	timerEvent (QTimerEvent *event)
	This event handler can be reimplemented in a subclass to receive timer events for the object.

virtual void	childEvent (QChildEvent *event)
	This event handler can be reimplemented in a subclass to receive child events.

virtual void	customEvent (QEvent *event)
	This event handler can be reimplemented in a subclass to receive custom events.

virtual void	connectNotify (const QMetaMethod &signal)

virtual void	disconnectNotify (const QMetaMethod &signal)

	QObject (QObjectPrivate &dd, QObject *parent=nullptr)

Properties
FillMode	fillMode

int	orientation

QRectF	sourceRect

QRectF	contentRect

QVideoSink *	videoSink

Properties inherited from QQuickItem
QQuickItem *	parent
	\qmlproperty Item QtQuick::Item::parent This property holds the visual parent of the item.

qreal	x
	\qmlproperty real QtQuick::Item::x \qmlproperty real QtQuick::Item::y \qmlproperty real QtQuick::Item::width \qmlproperty real QtQuick::Item::height

qreal	y
	Defines the item's y position relative to its parent.

qreal	z
	\qmlproperty real QtQuick::Item::z

qreal	width
	This property holds the width of this item.

qreal	height
	This property holds the height of this item.

qreal	opacity
	\qmlproperty real QtQuick::Item::opacity

bool	enabled
	\qmlproperty bool QtQuick::Item::enabled

bool	visible
	\qmlproperty bool QtQuick::Item::visible

Qt::FocusPolicy	focusPolicy
	\qmlproperty enumeration QtQuick::Item::focusPolicy

qreal	rotation
	\qmlproperty real QtQuick::Item::rotation This property holds the rotation of the item in degrees clockwise around its transformOrigin.

qreal	scale
	\qmlproperty real QtQuick::Item::scale This property holds the scale factor for this item.

TransformOrigin	transformOrigin
	\qmlproperty enumeration QtQuick::Item::transformOrigin This property holds the origin point around which scale and rotation transform.

QPointF	transformOriginPoint

QQmlListProperty< QQuickTransform >	transform
	\qmlproperty list<Transform> QtQuick::Item::transform This property holds the list of transformations to apply.

bool	smooth
	\qmlproperty bool QtQuick::Item::smooth

bool	antialiasing
	\qmlproperty bool QtQuick::Item::antialiasing

qreal	implicitWidth

qreal	implicitHeight

QObject *	containmentMask
	\qmlproperty QObject* QtQuick::Item::containmentMask

Properties inherited from QObject
QString	objectName
	the name of this object

Additional Inherited Members
Public Slots inherited from QQuickItem
void	update ()
	Schedules a call to updatePaintNode() for this item.

Public Slots inherited from QObject
void	deleteLater ()
	\threadsafe

Static Public Member Functions inherited from QObject
static QMetaObject::Connection	connect (const QObject sender, const char signal, const QObject receiver, const char member, Qt::ConnectionType=Qt::AutoConnection)
	\threadsafe

static QMetaObject::Connection	connect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &method, Qt::ConnectionType type=Qt::AutoConnection)

template<typename Func1 , typename Func2 >
static QMetaObject::Connection	connect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const typename QtPrivate::ContextTypeForFunctor< Func2 >::ContextType context, Func2 &&slot, Qt::ConnectionType type=Qt::AutoConnection)

template<typename Func1 , typename Func2 >
static QMetaObject::Connection	connect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, Func2 &&slot)

static bool	disconnect (const QObject sender, const char signal, const QObject receiver, const char member)
	\threadsafe

static bool	disconnect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &member)

static bool	disconnect (const QMetaObject::Connection &)
	Disconnect a connection.

template<typename Func1 , typename Func2 >
static bool	disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const typename QtPrivate::FunctionPointer< Func2 >::Object receiver, Func2 slot)

template<typename Func1 >
static bool	disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const QObject receiver, void **zero)

Public Attributes inherited from QQuickItem
const QSize &	targetSize = QSize())

qreal y	const

Protected Attributes inherited from QObject
QScopedPointer< QObjectData >	d_ptr

Related Symbols inherited from QObject
template< class T > T	qobject_cast (const QObject *object)
	Returns the given object cast to type T if the object is of type T (or of a subclass); otherwise returns \nullptr.

template< typename T > T	qFindChildqFindChildren (const QObject *obj, const QString &name)()

template< typename T > QList< T >	qFindChildrenqFindChildren (const QObject *obj, const QString &name)()

	QObjectList
	\macro Q_CLASSINFO(Name, Value)

Detailed Description

Render video or camera viewfinder.

\qmltype VideoOutput

! \instantiates QQuickVideoOutput

\inqmlmodule QtMultimedia

\qml

Rectangle { width: 800 height: 600 color: "black"

MediaPlayer { id: player source: "file://video.webm" videoOutput: videoOutput }

VideoOutput { id: videoOutput anchors.fill: parent } }

\endqml

The VideoOutput item supports untransformed, stretched, and uniformly scaled video presentation. For a description of stretched uniformly scaled presentation, see the \l fillMode property description.

See also: MediaPlayer, Camera

\omit

Definition at line 36 of file qquickvideooutput_p.h.

Member Enumeration Documentation

◆ FillMode

enum QQuickVideoOutput::FillMode

Enumerator
Stretch
PreserveAspectFit
PreserveAspectCrop

Definition at line 51 of file qquickvideooutput_p.h.

Constructor & Destructor Documentation

◆ QQuickVideoOutput()

QQuickVideoOutput::QQuickVideoOutput ( QQuickItem * parent = 0 )

Definition at line 103 of file qquickvideooutput.cpp.

References QObject::connect(), Qt::DirectConnection, frame, QMetaObject::invokeMethod(), QQuickItem::ItemHasContents, QQuickItem::setFlag(), QWidget::size, and QVideoSink::videoFrameChanged().

Here is the call graph for this function:

◆ ~QQuickVideoOutput()

QQuickVideoOutput::~QQuickVideoOutput ( )

Definition at line 120 of file qquickvideooutput.cpp.

Member Function Documentation

◆ contentRect()

QRectF QQuickVideoOutput::contentRect ( ) const

\qmlproperty rectangle QtMultimedia::VideoOutput::contentRect

This property holds the item coordinates of the area that would contain video to render. With certain fill modes, this rectangle will be larger than the visible area of the VideoOutput.

This property is useful when other coordinates are specified in terms of the source dimensions - this applied for relative (normalized) frame coordinates in the range of 0 to 1.0.

Areas outside this will be transparent.

Definition at line 298 of file qquickvideooutput.cpp.

◆ contentRectChanged

void QQuickVideoOutput::contentRectChanged ( )

signal

◆ fillMode()

QQuickVideoOutput::FillMode QQuickVideoOutput::fillMode ( ) const

\qmlproperty enumeration QtMultimedia::VideoOutput::fillMode

Set this property to define how the video is scaled to fit the target area.

\list

Stretch - the video is scaled to fit.
PreserveAspectFit - the video is scaled uniformly to fit without cropping
PreserveAspectCrop - the video is scaled uniformly to fill, cropping if necessary \endlist

The default fill mode is PreserveAspectFit.

Definition at line 152 of file qquickvideooutput.cpp.

◆ fillModeChanged

void QQuickVideoOutput::fillModeChanged ( QQuickVideoOutput::FillMode )

signal

Referenced by setFillMode().

Here is the caller graph for this function:

◆ geometryChange()

void QQuickVideoOutput::geometryChange	(	const QRectF &	newGeometry,
		const QRectF &	oldGeometry )

overrideprotectedvirtual

Since: 6.0

This function is called to handle this item's changes in geometry from oldGeometry to newGeometry. If the two geometries are the same, it doesn't do anything.

Derived classes must call the base class method within their implementation.

Reimplemented from QQuickItem.

Definition at line 339 of file qquickvideooutput.cpp.

References QQuickItem::geometryChange(), and Q_UNUSED.

Here is the call graph for this function:

◆ itemChange()

void QQuickVideoOutput::itemChange	(	QQuickItem::ItemChange	change,
		const ItemChangeData &	value )

overrideprotectedvirtual

Called when change occurs for this item.

value contains extra information relating to the change, when applicable.

If you re-implement this method in a subclass, be sure to call

QQuickItem::itemChange(change, value);

QQuickItem::itemChange

virtual void itemChange(ItemChange, const ItemChangeData &)

Called when change occurs for this item.

Definition qquickitem.cpp:5800

value

EGLOutputLayerEXT EGLint EGLAttrib value

[5]

Definition qeglstreamconvenience_p.h:46

typically at the end of your implementation, to ensure the \l windowChanged() signal will be emitted.

Reimplemented from QQuickItem.

Definition at line 382 of file qquickvideooutput.cpp.

References QObject::connect(), Qt::DirectConnection, disconnect(), QQuickItem::ItemSceneChange, QQuickWindow::sceneGraphInitialized(), and QQuickWindow::sceneGraphInvalidated().

Here is the call graph for this function:

◆ orientation()

int QQuickVideoOutput::orientation ( ) const

\qmlproperty int QtMultimedia::VideoOutput::orientation

In some cases the source video stream requires a certain orientation to be correct. This includes sources like a camera viewfinder, where the displayed viewfinder should match reality, no matter what rotation the rest of the user interface has.

This property allows you to apply a rotation (in steps of 90 degrees) to compensate for any user interface rotation, with positive values in the anti-clockwise direction.

The orientation change will also affect the mapping of coordinates from source to viewport.

Definition at line 239 of file qquickvideooutput.cpp.

◆ orientationChanged

void QQuickVideoOutput::orientationChanged ( )

signal

Referenced by setOrientation().

Here is the caller graph for this function:

◆ releaseResources()

void QQuickVideoOutput::releaseResources ( )

overrideprotectedvirtual

This function is called when an item should release graphics resources which are not already managed by the nodes returned from QQuickItem::updatePaintNode().

This happens when the item is about to be removed from the window it was previously rendering to. The item is guaranteed to have a \l {QQuickItem::window()}{window} when the function is called.

The function is called on the GUI thread and the state of the rendering thread, when it is used, is unknown. Objects should not be deleted directly, but instead scheduled for cleanup using QQuickWindow::scheduleRenderJob().

See also: {Graphics Resource Handling}

Reimplemented from QQuickItem.

Definition at line 363 of file qquickvideooutput.cpp.

◆ setFillMode()

void QQuickVideoOutput::setFillMode ( FillMode mode )

Definition at line 157 of file qquickvideooutput.cpp.

References emit, fillMode, fillModeChanged(), and QQuickItem::update().

Here is the call graph for this function:

◆ setOrientation()

void QQuickVideoOutput::setOrientation ( int orientation )

Definition at line 244 of file qquickvideooutput.cpp.

References emit, QSize::height(), orientation, orientationChanged(), QQuickItem::setImplicitHeight(), QQuickItem::setImplicitWidth(), QSize::transpose(), QQuickItem::update(), and QSize::width().

Here is the call graph for this function:

◆ sourceChanged

void QQuickVideoOutput::sourceChanged ( )

signal

◆ sourceRect()

QRectF QQuickVideoOutput::sourceRect ( ) const

\qmlproperty rectangle QtMultimedia::VideoOutput::sourceRect

This property holds the area of the source video content that is considered for rendering. The values are in source pixel coordinates, adjusted for the source's pixel aspect ratio.

Note that typically the top left corner of this rectangle will be {0,0} while the width and height will be the width and height of the input content. Only when the video source has a viewport set, these values will differ.

The orientation setting does not affect this rectangle.

See also: QVideoFrameFormat::viewport()

Definition at line 320 of file qquickvideooutput.cpp.

References Q_ASSERT, QSize::transpose(), and viewport().

Here is the call graph for this function:

◆ sourceRectChanged

void QQuickVideoOutput::sourceRectChanged ( )

signal

◆ updatePaintNode()

QSGNode * QQuickVideoOutput::updatePaintNode	(	QSGNode *	oldNode,
		QQuickItem::UpdatePaintNodeData *	updatePaintNodeData )

overrideprotectedvirtual

Called on the render thread when it is time to sync the state of the item with the scene graph.

The function is called as a result of QQuickItem::update(), if the user has set the QQuickItem::ItemHasContents flag on the item.

The function should return the root of the scene graph subtree for this item. Most implementations will return a single QSGGeometryNode containing the visual representation of this item. oldNode is the node that was returned the last time the function was called. updatePaintNodeData provides a pointer to the QSGTransformNode associated with this QQuickItem.

QSGNode *MyItem::updatePaintNode(QSGNode *node, UpdatePaintNodeData *)
{
    QSGSimpleRectNode *n = static_cast<QSGSimpleRectNode *>(node);
    if (!n) {
        n = new QSGSimpleRectNode();
        n->setColor(Qt::red);
    }
    n->setRect(boundingRect());
    return n;
}

The main thread is blocked while this function is executed so it is safe to read values from the QQuickItem instance and other objects in the main thread.

If no call to QQuickItem::updatePaintNode() result in actual scene graph changes, like QSGNode::markDirty() or adding and removing nodes, then the underlying implementation may decide to not render the scene again as the visual outcome is identical.

Warning: It is crucial that graphics operations and interaction with the scene graph happens exclusively on the render thread, primarily during the QQuickItem::updatePaintNode() call. The best rule of thumb is to only use classes with the "QSG" prefix inside the QQuickItem::updatePaintNode() function.; This function is called on the render thread. This means any QObjects or thread local storage that is created will have affinity to the render thread, so apply caution when doing anything other than rendering in this function. Similarly for signals, these will be emitted on the render thread and will thus often be delivered via queued connections.

Note: All classes with QSG prefix should be used solely on the scene graph's rendering thread. See \l {Scene Graph and Rendering} for more information.

See also: QSGMaterial, QSGGeometryNode, QSGGeometry, QSGFlatColorMaterial, QSGTextureMaterial, QSGNode::markDirty(), {Graphics Resource Handling}

Reimplemented from QQuickItem.

Definition at line 466 of file qquickvideooutput.cpp.

References QVideoFrame::handleType(), QVideoFrame::isValid(), lock, orientation, QVideoFrame::pixelFormat(), Q_UNUSED, and qCDebug.

Here is the call graph for this function:

◆ videoSink()

QVideoSink * QQuickVideoOutput::videoSink ( ) const

\qmlproperty object QtMultimedia::VideoOutput::videoSink

This property holds the underlaying C++ QVideoSink object that is used to render the video frames to this VideoOutput element.

Normal usage of VideoOutput from QML should not require using this property.

Definition at line 133 of file qquickvideooutput.cpp.

Property Documentation

◆ contentRect

QRectF QQuickVideoOutput::contentRect

read

Definition at line 43 of file qquickvideooutput_p.h.

◆ fillMode

FillMode QQuickVideoOutput::fillMode

readwrite

Definition at line 40 of file qquickvideooutput_p.h.

Referenced by setFillMode().

◆ orientation

int QQuickVideoOutput::orientation

readwrite

Definition at line 41 of file qquickvideooutput_p.h.

Referenced by setOrientation(), and updatePaintNode().

◆ sourceRect

QRectF QQuickVideoOutput::sourceRect

read

Definition at line 42 of file qquickvideooutput_p.h.

◆ videoSink

QVideoSink* QQuickVideoOutput::videoSink

read

Definition at line 44 of file qquickvideooutput_p.h.

The documentation for this class was generated from the following files:

qtmultimedia/src/multimediaquick/qquickvideooutput_p.h (26863856e1d9dbec355f61e4a0db93b9575cb1d0)
qtmultimedia/src/multimediaquick/qquickvideooutput.cpp (6f6050f79f896775bcb3d3a365fc4b282a354593)

Public Types

Signals

Public Member Functions

Protected Member Functions

Properties

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

◆ FillMode

Constructor & Destructor Documentation

◆ QQuickVideoOutput()

◆ ~QQuickVideoOutput()

Member Function Documentation

◆ contentRect()

◆ contentRectChanged

◆ fillMode()

◆ fillModeChanged

◆ geometryChange()

◆ itemChange()

◆ orientation()

◆ orientationChanged

◆ releaseResources()

◆ setFillMode()

◆ setOrientation()

◆ sourceChanged

◆ sourceRect()

◆ sourceRectChanged

◆ updatePaintNode()

◆ videoSink()

Property Documentation

◆ contentRect

◆ fillMode

◆ orientation

◆ sourceRect

◆ videoSink