Qt
Internal/Contributor docs for the Qt SDK. <b>Note:</b> These are NOT official API docs; those are found <a href='https://doc.qt.io/'>here</a>.
Loading...
Searching...
No Matches
QIBusInputContextProxy Class Reference

#include <qibusinputcontextproxy.h>

+ Inheritance diagram for QIBusInputContextProxy:
+ Collaboration diagram for QIBusInputContextProxy:

Public Slots

QDBusPendingReply Destroy ()
 
QDBusPendingReply Disable ()
 
QDBusPendingReply Enable ()
 
QDBusPendingReply FocusIn ()
 
QDBusPendingReply FocusOut ()
 
QDBusPendingReply< QDBusVariantGetEngine ()
 
QDBusPendingReply< bool > IsEnabled ()
 
QDBusPendingReply< bool > ProcessKeyEvent (uint keyval, uint keycode, uint state)
 
QDBusPendingReply PropertyActivate (const QString &name, int state)
 
QDBusPendingReply Reset ()
 
QDBusPendingReply SetCapabilities (uint caps)
 
QDBusPendingReply SetCursorLocation (int x, int y, int w, int h)
 
QDBusPendingReply SetCursorLocationRelative (int x, int y, int w, int h)
 
QDBusPendingReply SetEngine (const QString &name)
 
QDBusPendingReply SetSurroundingText (const QDBusVariant &text, uint cursor_pos, uint anchor_pos)
 
- Public Slots inherited from QObject
void deleteLater ()
 \threadsafe
 

Signals

void CommitText (const QDBusVariant &text)
 
void CursorDownLookupTable ()
 
void CursorUpLookupTable ()
 
void DeleteSurroundingText (int offset, uint n_chars)
 
void Disabled ()
 
void Enabled ()
 
void ForwardKeyEvent (uint keyval, uint keycode, uint state)
 
void HideAuxiliaryText ()
 
void HideLookupTable ()
 
void HidePreeditText ()
 
void PageDownLookupTable ()
 
void PageUpLookupTable ()
 
void RegisterProperties (const QDBusVariant &props)
 
void RequireSurroundingText ()
 
void ShowAuxiliaryText ()
 
void ShowLookupTable ()
 
void ShowPreeditText ()
 
void UpdateAuxiliaryText (const QDBusVariant &text, bool visible)
 
void UpdateLookupTable (const QDBusVariant &table, bool visible)
 
void UpdatePreeditText (const QDBusVariant &text, uint cursor_pos, bool visible)
 
void UpdatePreeditTextWithMode (const QDBusVariant &text, uint cursor_pos, bool visible, uint mode)
 
void UpdateProperty (const QDBusVariant &prop)
 
- Signals inherited from QObject
void destroyed (QObject *=nullptr)
 This signal is emitted immediately before the object obj is destroyed, after any instances of QPointer have been notified, and cannot be blocked.
 
void objectNameChanged (const QString &objectName, QPrivateSignal)
 This signal is emitted after the object's name has been changed.
 

Public Member Functions

 QIBusInputContextProxy (const QString &service, const QString &path, const QDBusConnection &connection, QObject *parent=nullptr)
 
 ~QIBusInputContextProxy ()
 
QIBusPropTypeClientCommitPreedit clientCommitPreedit () const
 
void setClientCommitPreedit (const QIBusPropTypeClientCommitPreedit &value)
 
QIBusPropTypeContentType contentType () const
 
void setContentType (const QIBusPropTypeContentType &value)
 
- Public Member Functions inherited from QDBusAbstractInterface
virtual ~QDBusAbstractInterface ()
 Releases this object's resources.
 
bool isValid () const
 Returns true if this is a valid reference to a remote object.
 
QDBusConnection connection () const
 Returns the connection this interface is associated with.
 
QString service () const
 Returns the name of the service this interface is associated with.
 
QString path () const
 Returns the object path that this interface is associated with.
 
QString interface () const
 Returns the name of this interface.
 
QDBusError lastError () const
 Returns the error the last operation produced, or an invalid error if the last operation did not produce an error.
 
void setTimeout (int timeout)
 Sets the timeout in milliseconds for all future DBus calls to timeout.
 
int timeout () const
 Returns the current value of the timeout in milliseconds.
 
void setInteractiveAuthorizationAllowed (bool enable)
 Configures whether, for asynchronous calls, the caller is prepared to wait for interactive authorization.
 
bool isInteractiveAuthorizationAllowed () const
 Returns whether, for asynchronous calls, the caller is prepared to wait for interactive authorization.
 
QDBusMessage call (const QString &method)
 
template<typename... Args>
QDBusMessage call (const QString &method, Args &&...args)
 Calls the method method on this interface and passes args to the method.
 
QDBusMessage call (QDBus::CallMode mode, const QString &method)
 
template<typename... Args>
QDBusMessage call (QDBus::CallMode mode, const QString &method, Args &&...args)
 This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.Calls the method method on this interface and passes args to the method.
 
QDBusMessage callWithArgumentList (QDBus::CallMode mode, const QString &method, const QList< QVariant > &args)
 Places a call to the remote method specified by method on this interface, using args as arguments.
 
bool callWithCallback (const QString &method, const QList< QVariant > &args, QObject *receiver, const char *member, const char *errorSlot)
 Places a call to the remote method specified by method on this interface, using args as arguments.
 
bool callWithCallback (const QString &method, const QList< QVariant > &args, QObject *receiver, const char *member)
 This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.This function is deprecated.
 
QDBusPendingCall asyncCall (const QString &method)
 
template<typename... Args>
QDBusPendingCall asyncCall (const QString &method, Args &&...args)
 Calls the method method on this interface and passes args to the method.
 
QDBusPendingCall asyncCallWithArgumentList (const QString &method, const QList< QVariant > &args)
 
- Public Member Functions inherited from QDBusAbstractInterfaceBase
int qt_metacall (QMetaObject::Call, int, void **) override
 
- Public Member Functions inherited from QObject
Q_INVOKABLE QObject (QObject *parent=nullptr)
 Constructs an object with parent object parent.
 
virtual ~QObject ()
 Destroys the object, deleting all its child objects.
 
virtual bool event (QEvent *event)
 This virtual function receives events to an object and should return true if the event e was recognized and processed.
 
virtual bool eventFilter (QObject *watched, QEvent *event)
 Filters events if this object has been installed as an event filter for the watched object.
 
QString objectName () const
 
Q_WEAK_OVERLOAD void setObjectName (const QString &name)
 Sets the object's name to name.
 
void setObjectName (QAnyStringView name)
 This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.
 
QBindable< QStringbindableObjectName ()
 
bool isWidgetType () const
 Returns true if the object is a widget; otherwise returns false.
 
bool isWindowType () const
 Returns true if the object is a window; otherwise returns false.
 
bool isQuickItemType () const
 Returns true if the object is a QQuickItem; otherwise returns false.
 
bool signalsBlocked () const noexcept
 Returns true if signals are blocked; otherwise returns false.
 
bool blockSignals (bool b) noexcept
 If block is true, signals emitted by this object are blocked (i.e., emitting a signal will not invoke anything connected to it).
 
QThreadthread () const
 Returns the thread in which the object lives.
 
bool moveToThread (QThread *thread QT6_DECL_NEW_OVERLOAD_TAIL)
 Changes the thread affinity for this object and its children and returns true on success.
 
int startTimer (int interval, Qt::TimerType timerType=Qt::CoarseTimer)
 This is an overloaded function that will start a timer of type timerType and a timeout of interval milliseconds.
 
int startTimer (std::chrono::nanoseconds time, Qt::TimerType timerType=Qt::CoarseTimer)
 
void killTimer (int id)
 Kills the timer with timer identifier, id.
 
void killTimer (Qt::TimerId id)
 
template<typename T >
findChild (QAnyStringView aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
 Returns the child of this object that can be cast into type T and that is called name, or \nullptr if there is no such object.
 
template<typename T >
QList< T > findChildren (QAnyStringView aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
 Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects.
 
template<typename T >
findChild (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
 This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.
 
template<typename T >
QList< T > findChildren (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
 This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.
 
const QObjectListchildren () const
 Returns a list of child objects.
 
void setParent (QObject *parent)
 Makes the object a child of parent.
 
void installEventFilter (QObject *filterObj)
 Installs an event filter filterObj on this object.
 
void removeEventFilter (QObject *obj)
 Removes an event filter object obj from this object.
 
QMetaObject::Connection connect (const QObject *sender, const char *signal, const char *member, Qt::ConnectionType type=Qt::AutoConnection) const
 
bool disconnect (const char *signal=nullptr, const QObject *receiver=nullptr, const char *member=nullptr) const
 
bool disconnect (const QObject *receiver, const char *member=nullptr) const
 
void dumpObjectTree () const
 Dumps a tree of children to the debug output.
 
void dumpObjectInfo () const
 Dumps information about signal connections, etc.
 
bool setProperty (const char *name, const QVariant &value)
 Sets the value of the object's name property to value.
 
bool setProperty (const char *name, QVariant &&value)
 
QVariant property (const char *name) const
 Returns the value of the object's name property.
 
QList< QByteArraydynamicPropertyNames () const
 
QBindingStoragebindingStorage ()
 
const QBindingStoragebindingStorage () const
 
QObjectparent () const
 Returns a pointer to the parent object.
 
bool inherits (const char *classname) const
 Returns true if this object is an instance of a class that inherits className or a QObject subclass that inherits className; otherwise returns false.
 

Static Public Member Functions

static const char * staticInterfaceName ()
 
- Static Public Member Functions inherited from QObject
static QMetaObject::Connection connect (const QObject *sender, const char *signal, const QObject *receiver, const char *member, Qt::ConnectionType=Qt::AutoConnection)
 \threadsafe
 
static QMetaObject::Connection connect (const QObject *sender, const QMetaMethod &signal, const QObject *receiver, const QMetaMethod &method, Qt::ConnectionType type=Qt::AutoConnection)
 
template<typename Func1 , typename Func2 >
static QMetaObject::Connection connect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, const typename QtPrivate::ContextTypeForFunctor< Func2 >::ContextType *context, Func2 &&slot, Qt::ConnectionType type=Qt::AutoConnection)
 
template<typename Func1 , typename Func2 >
static QMetaObject::Connection connect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, Func2 &&slot)
 
static bool disconnect (const QObject *sender, const char *signal, const QObject *receiver, const char *member)
 \threadsafe
 
static bool disconnect (const QObject *sender, const QMetaMethod &signal, const QObject *receiver, const QMetaMethod &member)
 
static bool disconnect (const QMetaObject::Connection &)
 Disconnect a connection.
 
template<typename Func1 , typename Func2 >
static bool disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, const typename QtPrivate::FunctionPointer< Func2 >::Object *receiver, Func2 slot)
 
template<typename Func1 >
static bool disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, const QObject *receiver, void **zero)
 

Properties

QIBusPropTypeClientCommitPreedit ClientCommitPreedit
 
QIBusPropTypeContentType ContentType
 
- Properties inherited from QObject
QString objectName
 the name of this object
 

Additional Inherited Members

- Protected Member Functions inherited from QDBusAbstractInterface
 QDBusAbstractInterface (const QString &service, const QString &path, const char *interface, const QDBusConnection &connection, QObject *parent)
 
 QDBusAbstractInterface (QDBusAbstractInterfacePrivate &, QObject *parent)
 
void connectNotify (const QMetaMethod &signal) override
 
void disconnectNotify (const QMetaMethod &signal) override
 
QVariant internalPropGet (const char *propname) const
 
void internalPropSet (const char *propname, const QVariant &value)
 
QDBusMessage internalConstCall (QDBus::CallMode mode, const QString &method, const QList< QVariant > &args=QList< QVariant >()) const
 
- Protected Member Functions inherited from QDBusAbstractInterfaceBase
 QDBusAbstractInterfaceBase (QDBusAbstractInterfacePrivate &dd, QObject *parent)
 
- Protected Member Functions inherited from QObject
QObjectsender () const
 Returns a pointer to the object that sent the signal, if called in a slot activated by a signal; otherwise it returns \nullptr.
 
int senderSignalIndex () const
 
int receivers (const char *signal) const
 Returns the number of receivers connected to the signal.
 
bool isSignalConnected (const QMetaMethod &signal) const
 
virtual void timerEvent (QTimerEvent *event)
 This event handler can be reimplemented in a subclass to receive timer events for the object.
 
virtual void childEvent (QChildEvent *event)
 This event handler can be reimplemented in a subclass to receive child events.
 
virtual void customEvent (QEvent *event)
 This event handler can be reimplemented in a subclass to receive custom events.
 
 QObject (QObjectPrivate &dd, QObject *parent=nullptr)
 
- Protected Attributes inherited from QObject
QScopedPointer< QObjectDatad_ptr
 

Detailed Description

Definition at line 29 of file qibusinputcontextproxy.h.

Constructor & Destructor Documentation

◆ QIBusInputContextProxy()

QIBusInputContextProxy::QIBusInputContextProxy ( const QString & service,
const QString & path,
const QDBusConnection & connection,
QObject * parent = nullptr )

Definition at line 18 of file qibusinputcontextproxy.cpp.

◆ ~QIBusInputContextProxy()

QIBusInputContextProxy::~QIBusInputContextProxy ( )

Definition at line 23 of file qibusinputcontextproxy.cpp.

Member Function Documentation

◆ clientCommitPreedit()

QIBusPropTypeClientCommitPreedit QIBusInputContextProxy::clientCommitPreedit ( ) const
inline

Definition at line 42 of file qibusinputcontextproxy.h.

References property.

◆ CommitText

void QIBusInputContextProxy::CommitText ( const QDBusVariant & text)
signal

◆ contentType()

QIBusPropTypeContentType QIBusInputContextProxy::contentType ( ) const
inline

Definition at line 48 of file qibusinputcontextproxy.h.

References property.

◆ CursorDownLookupTable

void QIBusInputContextProxy::CursorDownLookupTable ( )
signal

◆ CursorUpLookupTable

void QIBusInputContextProxy::CursorUpLookupTable ( )
signal

◆ DeleteSurroundingText

void QIBusInputContextProxy::DeleteSurroundingText ( int offset,
uint n_chars )
signal

◆ Destroy

QDBusPendingReply QIBusInputContextProxy::Destroy ( )
inlineslot

Definition at line 54 of file qibusinputcontextproxy.h.

References QDBusAbstractInterface::asyncCallWithArgumentList(), and QStringLiteral.

+ Here is the call graph for this function:

◆ Disable

QDBusPendingReply QIBusInputContextProxy::Disable ( )
inlineslot

Definition at line 60 of file qibusinputcontextproxy.h.

References QDBusAbstractInterface::asyncCallWithArgumentList(), and QStringLiteral.

+ Here is the call graph for this function:

◆ Disabled

void QIBusInputContextProxy::Disabled ( )
signal

◆ Enable

QDBusPendingReply QIBusInputContextProxy::Enable ( )
inlineslot

Definition at line 66 of file qibusinputcontextproxy.h.

References QDBusAbstractInterface::asyncCallWithArgumentList(), and QStringLiteral.

+ Here is the call graph for this function:

◆ Enabled

void QIBusInputContextProxy::Enabled ( )
signal

◆ FocusIn

QDBusPendingReply QIBusInputContextProxy::FocusIn ( )
inlineslot

Definition at line 72 of file qibusinputcontextproxy.h.

References QDBusAbstractInterface::asyncCallWithArgumentList(), and QStringLiteral.

+ Here is the call graph for this function:

◆ FocusOut

QDBusPendingReply QIBusInputContextProxy::FocusOut ( )
inlineslot

Definition at line 78 of file qibusinputcontextproxy.h.

References QDBusAbstractInterface::asyncCallWithArgumentList(), and QStringLiteral.

+ Here is the call graph for this function:

◆ ForwardKeyEvent

void QIBusInputContextProxy::ForwardKeyEvent ( uint keyval,
uint keycode,
uint state )
signal

◆ GetEngine

QDBusPendingReply< QDBusVariant > QIBusInputContextProxy::GetEngine ( )
inlineslot

Definition at line 84 of file qibusinputcontextproxy.h.

References QDBusAbstractInterface::asyncCallWithArgumentList(), and QStringLiteral.

+ Here is the call graph for this function:

◆ HideAuxiliaryText

void QIBusInputContextProxy::HideAuxiliaryText ( )
signal

◆ HideLookupTable

void QIBusInputContextProxy::HideLookupTable ( )
signal

◆ HidePreeditText

void QIBusInputContextProxy::HidePreeditText ( )
signal

◆ IsEnabled

QDBusPendingReply< bool > QIBusInputContextProxy::IsEnabled ( )
inlineslot

Definition at line 90 of file qibusinputcontextproxy.h.

References QDBusAbstractInterface::asyncCallWithArgumentList(), and QStringLiteral.

+ Here is the call graph for this function:

◆ PageDownLookupTable

void QIBusInputContextProxy::PageDownLookupTable ( )
signal

◆ PageUpLookupTable

void QIBusInputContextProxy::PageUpLookupTable ( )
signal

◆ ProcessKeyEvent

QDBusPendingReply< bool > QIBusInputContextProxy::ProcessKeyEvent ( uint keyval,
uint keycode,
uint state )
inlineslot

Definition at line 96 of file qibusinputcontextproxy.h.

References QDBusAbstractInterface::asyncCallWithArgumentList(), QVariant::fromValue(), QStringLiteral, and state.

+ Here is the call graph for this function:

◆ PropertyActivate

QDBusPendingReply QIBusInputContextProxy::PropertyActivate ( const QString & name,
int state )
inlineslot

Definition at line 103 of file qibusinputcontextproxy.h.

References QDBusAbstractInterface::asyncCallWithArgumentList(), QVariant::fromValue(), QStringLiteral, and state.

+ Here is the call graph for this function:

◆ RegisterProperties

void QIBusInputContextProxy::RegisterProperties ( const QDBusVariant & props)
signal

◆ RequireSurroundingText

void QIBusInputContextProxy::RequireSurroundingText ( )
signal

◆ Reset

QDBusPendingReply QIBusInputContextProxy::Reset ( )
inlineslot

Definition at line 110 of file qibusinputcontextproxy.h.

References QDBusAbstractInterface::asyncCallWithArgumentList(), and QStringLiteral.

+ Here is the call graph for this function:

◆ SetCapabilities

QDBusPendingReply QIBusInputContextProxy::SetCapabilities ( uint caps)
inlineslot

Definition at line 116 of file qibusinputcontextproxy.h.

References QDBusAbstractInterface::asyncCallWithArgumentList(), QVariant::fromValue(), and QStringLiteral.

+ Here is the call graph for this function:

◆ setClientCommitPreedit()

void QIBusInputContextProxy::setClientCommitPreedit ( const QIBusPropTypeClientCommitPreedit & value)
inline

Definition at line 44 of file qibusinputcontextproxy.h.

References QVariant::fromValue(), and setProperty.

+ Here is the call graph for this function:

◆ setContentType()

void QIBusInputContextProxy::setContentType ( const QIBusPropTypeContentType & value)
inline

Definition at line 50 of file qibusinputcontextproxy.h.

References QVariant::fromValue(), and setProperty.

+ Here is the call graph for this function:

◆ SetCursorLocation

QDBusPendingReply QIBusInputContextProxy::SetCursorLocation ( int x,
int y,
int w,
int h )
inlineslot

Definition at line 123 of file qibusinputcontextproxy.h.

References QDBusAbstractInterface::asyncCallWithArgumentList(), QVariant::fromValue(), and QStringLiteral.

+ Here is the call graph for this function:

◆ SetCursorLocationRelative

QDBusPendingReply QIBusInputContextProxy::SetCursorLocationRelative ( int x,
int y,
int w,
int h )
inlineslot

Definition at line 130 of file qibusinputcontextproxy.h.

References QDBusAbstractInterface::asyncCallWithArgumentList(), QVariant::fromValue(), and QStringLiteral.

+ Here is the call graph for this function:

◆ SetEngine

QDBusPendingReply QIBusInputContextProxy::SetEngine ( const QString & name)
inlineslot

Definition at line 137 of file qibusinputcontextproxy.h.

References QDBusAbstractInterface::asyncCallWithArgumentList(), QVariant::fromValue(), and QStringLiteral.

+ Here is the call graph for this function:

◆ SetSurroundingText

QDBusPendingReply QIBusInputContextProxy::SetSurroundingText ( const QDBusVariant & text,
uint cursor_pos,
uint anchor_pos )
inlineslot

Definition at line 144 of file qibusinputcontextproxy.h.

References QDBusAbstractInterface::asyncCallWithArgumentList(), QVariant::fromValue(), QStringLiteral, and text.

+ Here is the call graph for this function:

◆ ShowAuxiliaryText

void QIBusInputContextProxy::ShowAuxiliaryText ( )
signal

◆ ShowLookupTable

void QIBusInputContextProxy::ShowLookupTable ( )
signal

◆ ShowPreeditText

void QIBusInputContextProxy::ShowPreeditText ( )
signal

◆ staticInterfaceName()

static const char * QIBusInputContextProxy::staticInterfaceName ( )
inlinestatic

Definition at line 33 of file qibusinputcontextproxy.h.

◆ UpdateAuxiliaryText

void QIBusInputContextProxy::UpdateAuxiliaryText ( const QDBusVariant & text,
bool visible )
signal

◆ UpdateLookupTable

void QIBusInputContextProxy::UpdateLookupTable ( const QDBusVariant & table,
bool visible )
signal

◆ UpdatePreeditText

void QIBusInputContextProxy::UpdatePreeditText ( const QDBusVariant & text,
uint cursor_pos,
bool visible )
signal

◆ UpdatePreeditTextWithMode

void QIBusInputContextProxy::UpdatePreeditTextWithMode ( const QDBusVariant & text,
uint cursor_pos,
bool visible,
uint mode )
signal

◆ UpdateProperty

void QIBusInputContextProxy::UpdateProperty ( const QDBusVariant & prop)
signal

Property Documentation

◆ ClientCommitPreedit

QIBusPropTypeClientCommitPreedit QIBusInputContextProxy::ClientCommitPreedit
readwrite

Definition at line 41 of file qibusinputcontextproxy.h.

◆ ContentType

QIBusPropTypeContentType QIBusInputContextProxy::ContentType
readwrite

Definition at line 47 of file qibusinputcontextproxy.h.


The documentation for this class was generated from the following files: