QQuick3DTexture Class Reference

#include <qquick3dtexture_p.h>

Inheritance diagram for QQuick3DTexture:

Collaboration diagram for QQuick3DTexture:

Public Types
enum	MappingMode { UV = 0 , Environment = 1 , LightProbe = 2 }
enum	TilingMode { ClampToEdge = 1 , MirroredRepeat , Repeat }
enum	Filter { None = 0 , Nearest , Linear }

Public Slots
void	setSource (const QUrl &source)
void	setSourceItem (QQuickItem *sourceItem)
void	setScaleU (float scaleU)
void	setScaleV (float scaleV)
void	setMappingMode (QQuick3DTexture::MappingMode mappingMode)
void	setHorizontalTiling (QQuick3DTexture::TilingMode tilingModeHorizontal)
void	setVerticalTiling (QQuick3DTexture::TilingMode tilingModeVertical)
Q_REVISION(6, 7) void setDepthTiling(QQuick3DTexture void	setRotationUV (float rotationUV)
void	setPositionU (float positionU)
void	setPositionV (float positionV)
void	setPivotU (float pivotU)
void	setPivotV (float pivotV)
void	setFlipU (bool flipU)
void	setFlipV (bool flipV)
void	setIndexUV (int indexUV)
void	setMagFilter (QQuick3DTexture::Filter magFilter)
void	setMinFilter (QQuick3DTexture::Filter minFilter)
void	setMipFilter (QQuick3DTexture::Filter mipFilter)
void	setTextureData (QQuick3DTextureData *textureData)
void	setGenerateMipmaps (bool generateMipmaps)
void	setAutoOrientation (bool autoOrientation)
Public Slots inherited from QQuick3DObject
void	update ()
void	setParentItem (QQuick3DObject *parentItem)
Public Slots inherited from QObject
void	deleteLater ()
	\threadsafe

Signals
void	sourceChanged ()
void	sourceItemChanged ()
void	scaleUChanged ()
void	scaleVChanged ()
void	mappingModeChanged ()
void	horizontalTilingChanged ()
void	verticalTilingChanged ()
	Q_REVISION (6, 7) void depthTilingChanged()
void	rotationUVChanged ()
void	positionUChanged ()
void	positionVChanged ()
void	pivotUChanged ()
void	pivotVChanged ()
void	flipUChanged ()
void	flipVChanged ()
void	indexUVChanged ()
void	magFilterChanged ()
void	minFilterChanged ()
void	mipFilterChanged ()
void	textureDataChanged ()
void	generateMipmapsChanged ()
void	autoOrientationChanged ()
	Q_REVISION (6, 7) void textureProviderChanged()
Signals inherited from QQuick3DObject
void	parentChanged ()
void	childrenChanged ()
void	stateChanged ()
Signals inherited from QObject
void	destroyed (QObject *=nullptr)
	This signal is emitted immediately before the object obj is destroyed, after any instances of QPointer have been notified, and cannot be blocked.
void	objectNameChanged (const QString &objectName, QPrivateSignal)
	This signal is emitted after the object's name has been changed.

Public Member Functions
	QQuick3DTexture (QQuick3DObject *parent=nullptr)
	\qmltype Texture \inherits Object3D \inqmlmodule QtQuick3D
	~QQuick3DTexture () override
QUrl	source () const
	\qmlproperty url QtQuick3D::Texture::source
QQuickItem *	sourceItem () const
	\qmlproperty Item QtQuick3D::Texture::sourceItem
float	scaleU () const
	\qmlproperty float QtQuick3D::Texture::scaleU
float	scaleV () const
	\qmlproperty float QtQuick3D::Texture::scaleV
MappingMode	mappingMode () const
	\qmlproperty enumeration QtQuick3D::Texture::mappingMode
TilingMode	horizontalTiling () const
	\qmlproperty enumeration QtQuick3D::Texture::tilingModeHorizontal
TilingMode	verticalTiling () const
	\qmlproperty enumeration QtQuick3D::Texture::tilingModeVertical
	Q_REVISION (6, 7) TilingMode depthTiling() const
float	rotationUV () const
	\qmlproperty float QtQuick3D::Texture::rotationUV
float	positionU () const
	\qmlproperty float QtQuick3D::Texture::positionU
float	positionV () const
	\qmlproperty float QtQuick3D::Texture::positionV
float	pivotU () const
	\qmlproperty float QtQuick3D::Texture::pivotU
float	pivotV () const
	\qmlproperty float QtQuick3D::Texture::pivotV
bool	flipU () const
	\qmlproperty bool QtQuick3D::Texture::flipU
bool	flipV () const
	\qmlproperty bool QtQuick3D::Texture::flipV
int	indexUV () const
	\qmlproperty int QtQuick3D::Texture::indexUV
Filter	magFilter () const
	\qmlproperty enumeration QtQuick3D::Texture::magFilter
Filter	minFilter () const
	\qmlproperty enumeration QtQuick3D::Texture::minFilter
Filter	mipFilter () const
	\qmlproperty enumeration QtQuick3D::Texture::mipFilter
QQuick3DTextureData *	textureData () const
	\qmlproperty TextureData QtQuick3D::Texture::textureData
bool	generateMipmaps () const
	\qmlproperty bool QtQuick3D::Texture::generateMipmaps
bool	autoOrientation () const
	\qmlproperty bool QtQuick3D::Texture::autoOrientation
QSSGRenderImage *	getRenderImage ()
	Q_REVISION (6, 7) QQuick3DRenderExtension *textureProvider() const
	Q_REVISION (6, 7) void setTextureProvider(QQuick3DRenderExtension *newRenderTexture)
bool	extensionDirty () const
Public Member Functions inherited from QObject
Q_INVOKABLE	QObject (QObject *parent=nullptr)
	Constructs an object with parent object parent.
virtual	~QObject ()
	Destroys the object, deleting all its child objects.
virtual bool	event (QEvent *event)
	This virtual function receives events to an object and should return true if the event e was recognized and processed.
virtual bool	eventFilter (QObject *watched, QEvent *event)
	Filters events if this object has been installed as an event filter for the watched object.
QString	objectName () const
Q_WEAK_OVERLOAD void	setObjectName (const QString &name)
	Sets the object's name to name.
void	setObjectName (QAnyStringView name)
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.
QBindable< QString >	bindableObjectName ()
bool	isWidgetType () const
	Returns true if the object is a widget; otherwise returns false.
bool	isWindowType () const
	Returns true if the object is a window; otherwise returns false.
bool	isQuickItemType () const
	Returns true if the object is a QQuickItem; otherwise returns false.
bool	signalsBlocked () const noexcept
	Returns true if signals are blocked; otherwise returns false.
bool	blockSignals (bool b) noexcept
	If block is true, signals emitted by this object are blocked (i.e., emitting a signal will not invoke anything connected to it).
QThread *	thread () const
	Returns the thread in which the object lives.
bool	moveToThread (QThread *thread QT6_DECL_NEW_OVERLOAD_TAIL)
	Changes the thread affinity for this object and its children and returns true on success.
int	startTimer (int interval, Qt::TimerType timerType=Qt::CoarseTimer)
	This is an overloaded function that will start a timer of type timerType and a timeout of interval milliseconds.
int	startTimer (std::chrono::nanoseconds time, Qt::TimerType timerType=Qt::CoarseTimer)
void	killTimer (int id)
	Kills the timer with timer identifier, id.
void	killTimer (Qt::TimerId id)
template<typename T >
T	findChild (QAnyStringView aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	Returns the child of this object that can be cast into type T and that is called name, or \nullptr if there is no such object.
template<typename T >
QList< T >	findChildren (QAnyStringView aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects.
template<typename T >
T	findChild (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.
template<typename T >
QList< T >	findChildren (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.
const QObjectList &	children () const
	Returns a list of child objects.
void	setParent (QObject *parent)
	Makes the object a child of parent.
void	installEventFilter (QObject *filterObj)
	Installs an event filter filterObj on this object.
void	removeEventFilter (QObject *obj)
	Removes an event filter object obj from this object.
QMetaObject::Connection	connect (const QObject *sender, const char *signal, const char *member, Qt::ConnectionType type=Qt::AutoConnection) const
bool	disconnect (const char *signal=nullptr, const QObject *receiver=nullptr, const char *member=nullptr) const
bool	disconnect (const QObject *receiver, const char *member=nullptr) const
void	dumpObjectTree () const
	Dumps a tree of children to the debug output.
void	dumpObjectInfo () const
	Dumps information about signal connections, etc.
bool	setProperty (const char *name, const QVariant &value)
	Sets the value of the object's name property to value.
bool	setProperty (const char *name, QVariant &&value)
QVariant	property (const char *name) const
	Returns the value of the object's name property.
QList< QByteArray >	dynamicPropertyNames () const
QBindingStorage *	bindingStorage ()
const QBindingStorage *	bindingStorage () const
QObject *	parent () const
	Returns a pointer to the parent object.
bool	inherits (const char *classname) const
	Returns true if this object is an instance of a class that inherits className or a QObject subclass that inherits className; otherwise returns false.
Public Member Functions inherited from QQmlParserStatus
	QQmlParserStatus ()
virtual	~QQmlParserStatus ()
Public Member Functions inherited from QQuickItemChangeListener
virtual	~QQuickItemChangeListener ()
virtual void	itemSiblingOrderChanged (QQuickItem *)
virtual void	itemVisibilityChanged (QQuickItem *)
virtual void	itemEnabledChanged (QQuickItem *)
virtual void	itemOpacityChanged (QQuickItem *)
virtual void	itemDestroyed (QQuickItem *)
virtual void	itemChildAdded (QQuickItem *, QQuickItem *)
virtual void	itemChildRemoved (QQuickItem *, QQuickItem *)
virtual void	itemParentChanged (QQuickItem *, QQuickItem *)
virtual void	itemRotationChanged (QQuickItem *)
virtual void	itemImplicitWidthChanged (QQuickItem *)
virtual void	itemImplicitHeightChanged (QQuickItem *)
virtual void	itemFocusChanged (QQuickItem *, Qt::FocusReason)
virtual QQuickAnchorsPrivate *	anchorPrivate ()

Protected Member Functions
QSSGRenderGraphObject *	updateSpatialNode (QSSGRenderGraphObject *node) override
void	markAllDirty () override
void	itemChange (ItemChange change, const ItemChangeData &value) override
void	itemGeometryChanged (QQuickItem *item, QQuickGeometryChange change, const QRectF &geometry) override
	QQuick3DTexture (QQuick3DObjectPrivate &dd, QQuick3DObject *parent=nullptr)
Protected Member Functions inherited from QQuick3DObject
	QQuick3DObject (QQuick3DObjectPrivate &dd, QQuick3DObject *parent=nullptr)
void	classBegin () override
	Invoked after class creation, but before any properties have been set.
void	componentComplete () override
	Invoked after the root component that caused this instantiation has completed construction.
bool	isComponentComplete () const
virtual void	preSync ()
Protected Member Functions inherited from QObject
QObject *	sender () const
	Returns a pointer to the object that sent the signal, if called in a slot activated by a signal; otherwise it returns \nullptr.
int	senderSignalIndex () const
int	receivers (const char *signal) const
	Returns the number of receivers connected to the signal.
bool	isSignalConnected (const QMetaMethod &signal) const
virtual void	timerEvent (QTimerEvent *event)
	This event handler can be reimplemented in a subclass to receive timer events for the object.
virtual void	childEvent (QChildEvent *event)
	This event handler can be reimplemented in a subclass to receive child events.
virtual void	customEvent (QEvent *event)
	This event handler can be reimplemented in a subclass to receive custom events.
virtual void	connectNotify (const QMetaMethod &signal)
virtual void	disconnectNotify (const QMetaMethod &signal)
	QObject (QObjectPrivate &dd, QObject *parent=nullptr)

Properties
QUrl	source
QQuickItem *	sourceItem
QQuick3DTextureData *	textureData
QQuick3DRenderExtension *	textureProvider
	\qmlproperty RenderExtension QtQuick3D::Texture::textureProvider
float	scaleU
float	scaleV
MappingMode	mappingMode
TilingMode	tilingModeHorizontal
TilingMode	tilingModeVertical
TilingMode	tilingModeDepth
float	rotationUV
float	positionU
float	positionV
float	pivotU
float	pivotV
bool	flipU
bool	flipV
int	indexUV
Filter	magFilter
Filter	minFilter
Filter	mipFilter
bool	generateMipmaps
bool	autoOrientation
Properties inherited from QQuick3DObject
QQuick3DObject *	parent
	\qmlproperty Object3D QtQuick3D::Object3D::parent This property holds the parent of the Object3D in a 3D scene.
Properties inherited from QObject
QString	objectName
	the name of this object

Additional Inherited Members
Static Public Member Functions inherited from QObject
static QMetaObject::Connection	connect (const QObject *sender, const char *signal, const QObject *receiver, const char *member, Qt::ConnectionType=Qt::AutoConnection)
	\threadsafe
static QMetaObject::Connection	connect (const QObject *sender, const QMetaMethod &signal, const QObject *receiver, const QMetaMethod &method, Qt::ConnectionType type=Qt::AutoConnection)
template<typename Func1 , typename Func2 >
static QMetaObject::Connection	connect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, const typename QtPrivate::ContextTypeForFunctor< Func2 >::ContextType *context, Func2 &&slot, Qt::ConnectionType type=Qt::AutoConnection)
template<typename Func1 , typename Func2 >
static QMetaObject::Connection	connect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, Func2 &&slot)
static bool	disconnect (const QObject *sender, const char *signal, const QObject *receiver, const char *member)
	\threadsafe
static bool	disconnect (const QObject *sender, const QMetaMethod &signal, const QObject *receiver, const QMetaMethod &member)
static bool	disconnect (const QMetaObject::Connection &)
	Disconnect a connection.
template<typename Func1 , typename Func2 >
static bool	disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, const typename QtPrivate::FunctionPointer< Func2 >::Object *receiver, Func2 slot)
template<typename Func1 >
static bool	disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, const QObject *receiver, void **zero)
Protected Attributes inherited from QObject
QScopedPointer< QObjectData >	d_ptr
Related Symbols inherited from QObject
template< class T > T	qobject_cast (const QObject *object)
	Returns the given object cast to type T if the object is of type T (or of a subclass); otherwise returns \nullptr.
template< typename T > T	qFindChildqFindChildren (const QObject *obj, const QString &name)()
template< typename T > QList< T >	qFindChildrenqFindChildren (const QObject *obj, const QString &name)()
	QObjectList
	\macro Q_CLASSINFO(Name, Value)

Detailed Description

Definition at line 32 of file qquick3dtexture_p.h.

Member Enumeration Documentation

Filter

enum QQuick3DTexture::Filter

Enumerator
None
Nearest
Linear

Definition at line 78 of file qquick3dtexture_p.h.

MappingMode

enum QQuick3DTexture::MappingMode

Enumerator
UV
Environment
LightProbe

Definition at line 62 of file qquick3dtexture_p.h.

TilingMode

enum QQuick3DTexture::TilingMode

Enumerator
ClampToEdge
MirroredRepeat
Repeat

Definition at line 70 of file qquick3dtexture_p.h.

Constructor & Destructor Documentation

QQuick3DTexture() [1/2]

QT_BEGIN_NAMESPACE QQuick3DTexture::QQuick3DTexture ( QQuick3DObject * parent = nullptr )

explicit

\qmltype Texture \inherits Object3D \inqmlmodule QtQuick3D

Defines a texture for use in 3D scenes.

A texture is technically any array of pixels (1D, 2D or 3D) and its related settings, such as minification and magnification filters, scaling and UV transformations.

The Texture type in Qt Quick 3D represents a two-dimensional image. Its use is typically to map onto / wrap around three-dimensional geometry to emulate additional detail which cannot be efficiently modelled in 3D. It can also be used to emulate other lighting effects, such as reflections.

While Texture itself always represents a 2D texture, other kinds of textures are available as well via subclasses of Texture. For example, to create a cube map texture with 6 faces, use the \l CubeMapTexture type.

When the geometry is being rendered, each location on its surface will be transformed to a corresponding location in the texture by transforming and interpolating the UV coordinates (texture coordinate) that have been set for the mesh's vertexes. The fragment shader program that is being used to render the active material will then typically sample the material's texture(s) at the given coordinates and use the sampled data in its light calculations.

Note

A Material may use multiple textures to give the desired interaction with light in the 3D scene. It can represent the color of each texel on the geometry surface, but also other attributes of the surface. For instance, a "normal map" can represent the deviation from the geometry normals for each texel on the surface, emulating light interaction with finer details on the surface, such as cracks or bumps. See \l{Qt Quick 3D - Principled Material Example}{the principled material example} for a demonstration of a material with multiple texture maps.

Texture objects can source image data from: \list

• an image or texture file by using the \l source property,
• a Qt Quick \l Item by using the sourceItem property,
• or by setting the \l textureData property to a \l TextureData item subclass for defining the custom texture contents. \endlist

The following example maps the image "madewithqt.png" onto the default sphere mesh, and scales the UV coordinates to tile the image on the sphere surface. \qml Model { source: "#Sphere" materials: [ PrincipledMaterial { baseColorMap: Texture { source: "madewithqt.png" scaleU: 4.0 scaleV: 4.0 } } ] } \endqml

The result looks as follows: \table \header

• Original image
• Mapped onto a sphere \row
• \endtable

See also

{Qt Quick 3D - Procedural Texture Example}

Definition at line 94 of file qquick3dtexture.cpp.

~QQuick3DTexture()

QQuick3DTexture::~QQuick3DTexture ( )

override

Definition at line 110 of file qquick3dtexture.cpp.

References QObject::deleteLater(), QQuickItemPrivate::Geometry, QQuickItemPrivate::get(), and QQuick3DSceneManager::qsgDynamicTextures.

Here is the call graph for this function:

QQuick3DTexture() [2/2]

QQuick3DTexture::QQuick3DTexture ( QQuick3DObjectPrivate & dd, QQuick3DObject * parent = nullptr )

explicitprotected

Definition at line 99 of file qquick3dtexture.cpp.

References QMetaMethod::isValid(), metaObject(), mo, and qWarning.

Here is the call graph for this function:

Member Function Documentation

autoOrientation()

bool QQuick3DTexture::autoOrientation

(

)

const

\qmlproperty bool QtQuick3D::Texture::autoOrientation

This property determines if a texture transformation, such as flipping the V texture coordinate, is applied automatically for textures where this is typically relevant.

By default, this property is set to true.

Certain type of texture data, such as compressed textures loaded via the \l source property from a .ktx or .pkm file, or textures generated by rendering a Qt Quick scene via the \l sourceItem property, often have a different Y axis orientation when compared to textures loaded from image files, such as, .png or .jpg. Therefore, such a Texture would appear "upside down" compared to a Texture with its source set to a regular image file. To remedy this, any qualifying Texture gets an implicit UV transformation as if the flipV property was set to true. If this is not desired, set this property to false.

Note

This property is effective when the Texture is used in combination with a DefaultMaterial or PrincipledMaterial. \l{QtQuick3D::CustomMaterial}{Custom materials} provide their own shader code, and so transformations such as the one configured by this property are ignored and are up to the application-provided shader code to implement.

Since

6.2

See also

flipV

Definition at line 649 of file qquick3dtexture.cpp.

autoOrientationChanged

void QQuick3DTexture::autoOrientationChanged ( )

signal

Referenced by setAutoOrientation().

Here is the caller graph for this function:

extensionDirty()

bool QQuick3DTexture::extensionDirty ( ) const

inline

Definition at line 116 of file qquick3dtexture_p.h.

flipU()

bool QQuick3DTexture::flipU

(

)

const

\qmlproperty bool QtQuick3D::Texture::flipU

This property sets the use of the horizontally flipped texture coordinates.

The default is false.

Note

This property is effective when the Texture is used in combination with a DefaultMaterial or PrincipledMaterial. \l{QtQuick3D::CustomMaterial}{Custom materials} provide their own shader code, and so transformations such as the one configured by this property are ignored and are up to the application-provided shader code to implement.

See also

flipV

Definition at line 473 of file qquick3dtexture.cpp.

flipUChanged

void QQuick3DTexture::flipUChanged ( )

signal

Referenced by setFlipU().

Here is the caller graph for this function:

flipV()

bool QQuick3DTexture::flipV

(

)

const

\qmlproperty bool QtQuick3D::Texture::flipV

This property sets the use of the vertically flipped texture coordinates.

The default is false.

Note

This property is effective when the Texture is used in combination with a DefaultMaterial or PrincipledMaterial. \l{QtQuick3D::CustomMaterial}{Custom materials} provide their own shader code, and so transformations such as the one configured by this property are ignored and are up to the application-provided shader code to implement.

See also

flipU

Definition at line 494 of file qquick3dtexture.cpp.

flipVChanged

void QQuick3DTexture::flipVChanged ( )

signal

Referenced by setFlipV().

Here is the caller graph for this function:

generateMipmaps()

bool QQuick3DTexture::generateMipmaps

(

)

const

\qmlproperty bool QtQuick3D::Texture::generateMipmaps

This property determines if mipmaps are generated for textures that do not provide mipmap levels themselves. Using mipmaps along with mip filtering gives better visual quality when viewing textures at a distance compared rendering without them, but it may come at a performance cost (both when initializing the image and during rendering).

By default, this property is set to false.

Note

It is necessary to set a \l{QtQuick3D::Texture::mipFilter}{mipFilter} mode for the generated mipmaps to be be used.

This property is not applicable when the texture content is based on a Qt Quick item referenced by the \l sourceItem property. Mipmap generation for dynamic textures is not feasible due to the performance implications. Therefore, the value of this property is ignored for such textures.

See also

mipFilter

Definition at line 613 of file qquick3dtexture.cpp.

generateMipmapsChanged

void QQuick3DTexture::generateMipmapsChanged ( )

signal

Referenced by setGenerateMipmaps().

Here is the caller graph for this function:

getRenderImage()

QSSGRenderImage * QQuick3DTexture::getRenderImage

(

)

Definition at line 1464 of file qquick3dtexture.cpp.

References QQuick3DObjectPrivate::get().

Referenced by QQuick3DRenderLayerHelpers::updateLayerNodeHelper(), QQuick3DParticleSpriteParticle::updateParticleNode(), QQuick3DDefaultMaterial::updateSpatialNode(), QQuick3DEffect::updateSpatialNode(), QQuick3DMaterial::updateSpatialNode(), QQuick3DPrincipledMaterial::updateSpatialNode(), QQuick3DReflectionProbe::updateSpatialNode(), and QQuick3DSpecularGlossyMaterial::updateSpatialNode().

Here is the call graph for this function:

Here is the caller graph for this function:

horizontalTiling()

QQuick3DTexture::TilingMode QQuick3DTexture::horizontalTiling

(

)

const

\qmlproperty enumeration QtQuick3D::Texture::tilingModeHorizontal

Controls how the texture is mapped when the U scaling value is greater than 1.

By default, this property is set to {Texture.Repeat}.

\value Texture.ClampToEdge Texture is not tiled, but the value on the edge is used instead. \value Texture.MirroredRepeat Texture is repeated and mirrored over the X axis. \value Texture.Repeat Texture is repeated over the X axis.

See also

scaleU

Definition at line 304 of file qquick3dtexture.cpp.

Referenced by QQuick3DEffect::updateSpatialNode().

Here is the caller graph for this function:

horizontalTilingChanged

void QQuick3DTexture::horizontalTilingChanged ( )

signal

Referenced by setHorizontalTiling().

Here is the caller graph for this function:

indexUV()

int QQuick3DTexture::indexUV

(

)

const

\qmlproperty int QtQuick3D::Texture::indexUV

This property sets the UV coordinate index used by this texture. Since QtQuick3D supports 2 UV sets(0 or 1) for now, the value will be saturated to the range.

The default is 0.

Definition at line 508 of file qquick3dtexture.cpp.

indexUVChanged

void QQuick3DTexture::indexUVChanged ( )

signal

Referenced by setIndexUV().

Here is the caller graph for this function:

itemChange()

void QQuick3DTexture::itemChange ( ItemChange change, const ItemChangeData & value )

overrideprotectedvirtual

Reimplemented from QQuick3DObject.

Definition at line 1375 of file qquick3dtexture.cpp.

References QObject::connect(), QQuick3DObjectPrivate::derefSceneManager(), disconnect(), QQuick3DObjectPrivate::get(), QQuickItemPrivate::get(), QQuick3DObject::itemChange(), Q_ASSERT, QQuick3DSceneManager::qsgDynamicTextures, QQuick3DObjectPrivate::refSceneManager(), QQuickItem::window(), and QQuick3DSceneManager::windowChanged().

Here is the call graph for this function:

itemGeometryChanged()

void QQuick3DTexture::itemGeometryChanged ( QQuickItem * item, QQuickGeometryChange change, const QRectF & geometry )

overrideprotectedvirtual

Reimplemented from QQuickItemChangeListener.

Definition at line 1431 of file qquick3dtexture.cpp.

References item, Q_ASSERT, Q_UNUSED, QQuickGeometryChange::sizeChange(), and QQuick3DObject::update().

Here is the call graph for this function:

magFilter()

QQuick3DTexture::Filter QQuick3DTexture::magFilter

(

)

const

\qmlproperty enumeration QtQuick3D::Texture::magFilter

This property determines how the texture is sampled when it is "magnified", i.e. a texel covers more than one pixel in screen space.

The default value is {Texture.Linear}.

\value Texture.Nearest uses the value of the closest texel. \value Texture.Linear takes the four closest texels and bilinearly interpolates them.

Note

Using Texture.None here will default to Texture.Linear instead.

See also

minFilter, mipFilter

Definition at line 528 of file qquick3dtexture.cpp.

magFilterChanged

void QQuick3DTexture::magFilterChanged ( )

signal

Referenced by setMagFilter().

Here is the caller graph for this function:

mappingMode()

QQuick3DTexture::MappingMode QQuick3DTexture::mappingMode

(

)

const

\qmlproperty enumeration QtQuick3D::Texture::mappingMode

This property defines which method of mapping to use when sampling this texture.

\value Texture.UV The default value. Suitable for base color, diffuse, opacity, and most other texture maps. Performs standard UV mapping. The same portion of the image will always appear on the same vertex, unless the UV coordinates are transformed and animated.

\value Texture.Environment Used for \l{PrincipledMaterial::specularReflectionMap}{specular reflection}, this causes the image to be projected onto the material as though it was being reflected. Using this mode for other type of texture maps provides a mirror effect.

\value Texture.LightProbe The default for HDRI sphere maps used by light probes. This mode does not need to be manually set for Texture objects associated with the \l{SceneEnvironment::lightProbe}{lightProbe} property, because it is implied automatically.

Definition at line 286 of file qquick3dtexture.cpp.

mappingModeChanged

void QQuick3DTexture::mappingModeChanged ( )

signal

Referenced by setMappingMode().

Here is the caller graph for this function:

markAllDirty()

void QQuick3DTexture::markAllDirty ( )

overrideprotectedvirtual

Reimplemented from QQuick3DObject.

Definition at line 1470 of file qquick3dtexture.cpp.

References QQuick3DObject::markAllDirty().

Referenced by updateSpatialNode().

Here is the call graph for this function:

Here is the caller graph for this function:

minFilter()

QQuick3DTexture::Filter QQuick3DTexture::minFilter

(

)

const

\qmlproperty enumeration QtQuick3D::Texture::minFilter

This property determines how the texture is sampled when it is "minimized", i.e. a texel covers less than one pixel in screen space.

The default value is {Texture.Linear}.

\value Texture.Nearest uses the value of the closest texel. \value Texture.Linear takes the four closest texels and bilinearly interpolates them.

Note

Using Texture.None here will default to Texture.Linear instead.

See also

magFilter, mipFilter

Definition at line 548 of file qquick3dtexture.cpp.

minFilterChanged

void QQuick3DTexture::minFilterChanged ( )

signal

Referenced by setMinFilter().

Here is the caller graph for this function:

mipFilter()

QQuick3DTexture::Filter QQuick3DTexture::mipFilter

(

)

const

\qmlproperty enumeration QtQuick3D::Texture::mipFilter

This property determines how the texture mipmaps are sampled when a texel covers less than one pixel.

The default value is {Texture.None}.

\value Texture.None disables the usage of mipmap sampling. \value Texture.Nearest uses mipmapping and samples the value of the closest texel. \value Texture.Linear uses mipmapping and interpolates between multiple texel values.

Note

This property will have no effect on Textures that do not have mipmaps.

See also

minFilter, magFilter

Definition at line 569 of file qquick3dtexture.cpp.

mipFilterChanged

void QQuick3DTexture::mipFilterChanged ( )

signal

Referenced by setMipFilter().

Here is the caller graph for this function:

pivotU()

float QQuick3DTexture::pivotU

(

)

const

\qmlproperty float QtQuick3D::Texture::pivotU

This property sets the pivot U position which is used when applying a \l{QtQuick3D::Texture::rotationUV}{rotationUV}.

The default is 0.0.

Note

This property is effective when the Texture is used in combination with a DefaultMaterial or PrincipledMaterial. \l{QtQuick3D::CustomMaterial}{Custom materials} provide their own shader code, and so transformations such as the one configured by this property are ignored and are up to the application-provided shader code to implement.

See also

rotationUV

Definition at line 430 of file qquick3dtexture.cpp.

pivotUChanged

void QQuick3DTexture::pivotUChanged ( )

signal

Referenced by setPivotU().

Here is the caller graph for this function:

pivotV()

float QQuick3DTexture::pivotV

(

)

const

\qmlproperty float QtQuick3D::Texture::pivotV

This property sets the pivot V position which is used when applying a \l{QtQuick3D::Texture::rotationUV}{rotationUV}.

The default is 0.0.

Note

This property is effective when the Texture is used in combination with a DefaultMaterial or PrincipledMaterial. \l{QtQuick3D::CustomMaterial}{Custom materials} provide their own shader code, and so transformations such as the one configured by this property are ignored and are up to the application-provided shader code to implement.

See also

pivotU, rotationUV

Definition at line 452 of file qquick3dtexture.cpp.

pivotVChanged

void QQuick3DTexture::pivotVChanged ( )

signal

Referenced by setPivotV().

Here is the caller graph for this function:

positionU()

float QQuick3DTexture::positionU

(

)

const

\qmlproperty float QtQuick3D::Texture::positionU

This property offsets the U coordinate mapping from left to right.

The default is 0.0.

Note

This property is effective when the Texture is used in combination with a DefaultMaterial or PrincipledMaterial. \l{QtQuick3D::CustomMaterial}{Custom materials} provide their own shader code, and so transformations such as the one configured by this property are ignored and are up to the application-provided shader code to implement.

See also

positionV

Definition at line 383 of file qquick3dtexture.cpp.

positionUChanged

void QQuick3DTexture::positionUChanged ( )

signal

Referenced by setPositionU().

Here is the caller graph for this function:

positionV()

float QQuick3DTexture::positionV

(

)

const

\qmlproperty float QtQuick3D::Texture::positionV

This property offsets the V coordinate mapping from bottom to top.

The default is 0.0.

Note

Qt Quick 3D uses OpenGL-style vertex data, regardless of the graphics API used at run time. The UV position {(0, 0)} is therefore referring to the bottom-left corner of the image data.

This property is effective when the Texture is used in combination with a DefaultMaterial or PrincipledMaterial. \l{QtQuick3D::CustomMaterial}{Custom materials} provide their own shader code, and so transformations such as the one configured by this property are ignored and are up to the application-provided shader code to implement.

See also

positionU

Definition at line 408 of file qquick3dtexture.cpp.

positionVChanged

void QQuick3DTexture::positionVChanged ( )

signal

Referenced by setPositionV().

Here is the caller graph for this function:

Q_REVISION() [1/5]

QQuick3DTexture::Q_REVISION	(	6	,
		7	) const

Q_REVISION() [2/5]

QQuick3DTexture::Q_REVISION	(	6	,
		7	) const

Q_REVISION [3/5]

QQuick3DTexture::Q_REVISION ( 6 , 7  )

signal

Q_REVISION() [4/5]

QQuick3DTexture::Q_REVISION	(	6	,
		7	)

Q_REVISION [5/5]

QQuick3DTexture::Q_REVISION ( 6 , 7  )

signal

rotationUV()

float QQuick3DTexture::rotationUV

(

)

const

\qmlproperty float QtQuick3D::Texture::rotationUV

This property rotates the texture around the pivot point. This is defined using euler angles and for a positive value rotation is clockwise.

The default is 0.0.

Note

This property is effective when the Texture is used in combination with a DefaultMaterial or PrincipledMaterial. \l{QtQuick3D::CustomMaterial}{Custom materials} provide their own shader code, and so transformations such as the one configured by this property are ignored and are up to the application-provided shader code to implement.

See also

pivotU, pivotV

Definition at line 362 of file qquick3dtexture.cpp.

rotationUVChanged

void QQuick3DTexture::rotationUVChanged ( )

signal

Referenced by setRotationUV().

Here is the caller graph for this function:

scaleU()

float QQuick3DTexture::scaleU

(

)

const

\qmlproperty float QtQuick3D::Texture::scaleU

This property defines how to scale the U texture coordinate when mapping to a mesh's UV coordinates.

Scaling the U value when using horizontal tiling will define how many times the texture is repeated from left to right.

The default is 1.0.

Note

This property is effective when the Texture is used in combination with a DefaultMaterial or PrincipledMaterial. \l{QtQuick3D::CustomMaterial}{Custom materials} provide their own shader code, and so transformations such as the one configured by this property are ignored and are up to the application-provided shader code to implement.

See also

tilingModeHorizontal

Definition at line 234 of file qquick3dtexture.cpp.

scaleUChanged

void QQuick3DTexture::scaleUChanged ( )

signal

Referenced by setScaleU().

Here is the caller graph for this function:

scaleV()

float QQuick3DTexture::scaleV

(

)

const

\qmlproperty float QtQuick3D::Texture::scaleV

This property defines how to scale the V texture coordinate when mapping to a mesh's UV coordinates.

Scaling the V value when using vertical tiling will define how many times a texture is repeated from bottom to top.

The default is 1.0.

Note

This property is effective when the Texture is used in combination with a DefaultMaterial or PrincipledMaterial. \l{QtQuick3D::CustomMaterial}{Custom materials} provide their own shader code, and so transformations such as the one configured by this property are ignored and are up to the application-provided shader code to implement.

See also

tilingModeVertical

Definition at line 259 of file qquick3dtexture.cpp.

scaleVChanged

void QQuick3DTexture::scaleVChanged ( )

signal

Referenced by setScaleV().

Here is the caller graph for this function:

setAutoOrientation

void QQuick3DTexture::setAutoOrientation ( bool autoOrientation )

slot

Definition at line 958 of file qquick3dtexture.cpp.

References autoOrientation, autoOrientationChanged(), emit, and QQuick3DObject::update().

Here is the call graph for this function:

setFlipU

void QQuick3DTexture::setFlipU ( bool flipU )

slot

Definition at line 882 of file qquick3dtexture.cpp.

References emit, flipU, flipUChanged(), and QQuick3DObject::update().

Here is the call graph for this function:

setFlipV

void QQuick3DTexture::setFlipV ( bool flipV )

slot

Definition at line 893 of file qquick3dtexture.cpp.

References emit, flipV, flipVChanged(), and QQuick3DObject::update().

Here is the call graph for this function:

setGenerateMipmaps

void QQuick3DTexture::setGenerateMipmaps ( bool generateMipmaps )

slot

Definition at line 947 of file qquick3dtexture.cpp.

References emit, generateMipmaps, generateMipmapsChanged(), and QQuick3DObject::update().

Referenced by setTextureProperties().

Here is the call graph for this function:

Here is the caller graph for this function:

setHorizontalTiling

void QQuick3DTexture::setHorizontalTiling ( QQuick3DTexture::TilingMode tilingModeHorizontal )

slot

Definition at line 798 of file qquick3dtexture.cpp.

References emit, horizontalTilingChanged(), tilingModeHorizontal, and QQuick3DObject::update().

Referenced by setTextureProperties().

Here is the call graph for this function:

Here is the caller graph for this function:

setIndexUV

void QQuick3DTexture::setIndexUV ( int indexUV )

slot

Definition at line 904 of file qquick3dtexture.cpp.

References emit, indexUV, indexUVChanged(), and QQuick3DObject::update().

Referenced by setTextureProperties().

Here is the call graph for this function:

Here is the caller graph for this function:

setMagFilter

void QQuick3DTexture::setMagFilter ( QQuick3DTexture::Filter magFilter )

slot

Definition at line 969 of file qquick3dtexture.cpp.

References emit, magFilter, magFilterChanged(), and QQuick3DObject::update().

Referenced by setTextureProperties().

Here is the call graph for this function:

Here is the caller graph for this function:

setMappingMode

void QQuick3DTexture::setMappingMode ( QQuick3DTexture::MappingMode mappingMode )

slot

Definition at line 788 of file qquick3dtexture.cpp.

References emit, mappingMode, mappingModeChanged(), and QQuick3DObject::update().

Referenced by setTextureProperties().

Here is the call graph for this function:

Here is the caller graph for this function:

setMinFilter

void QQuick3DTexture::setMinFilter ( QQuick3DTexture::Filter minFilter )

slot

Definition at line 980 of file qquick3dtexture.cpp.

References emit, minFilter, minFilterChanged(), and QQuick3DObject::update().

Referenced by setTextureProperties().

Here is the call graph for this function:

Here is the caller graph for this function:

setMipFilter

void QQuick3DTexture::setMipFilter ( QQuick3DTexture::Filter mipFilter )

slot

Definition at line 991 of file qquick3dtexture.cpp.

References emit, mipFilter, mipFilterChanged(), and QQuick3DObject::update().

Referenced by setTextureProperties().

Here is the call graph for this function:

Here is the caller graph for this function:

setPivotU

void QQuick3DTexture::setPivotU ( float pivotU )

slot

Definition at line 860 of file qquick3dtexture.cpp.

References emit, pivotU, pivotUChanged(), qFuzzyCompare(), and QQuick3DObject::update().

Here is the call graph for this function:

setPivotV

void QQuick3DTexture::setPivotV ( float pivotV )

slot

Definition at line 871 of file qquick3dtexture.cpp.

References emit, pivotV, pivotVChanged(), qFuzzyCompare(), and QQuick3DObject::update().

Referenced by setTextureProperties().

Here is the call graph for this function:

Here is the caller graph for this function:

setPositionU

void QQuick3DTexture::setPositionU ( float positionU )

slot

Definition at line 838 of file qquick3dtexture.cpp.

References emit, positionU, positionUChanged(), qFuzzyCompare(), and QQuick3DObject::update().

Referenced by setTextureProperties().

Here is the call graph for this function:

Here is the caller graph for this function:

setPositionV

void QQuick3DTexture::setPositionV ( float positionV )

slot

Definition at line 849 of file qquick3dtexture.cpp.

References emit, positionV, positionVChanged(), qFuzzyCompare(), and QQuick3DObject::update().

Referenced by setTextureProperties().

Here is the call graph for this function:

Here is the caller graph for this function:

setRotationUV

void QQuick3DTexture::setRotationUV ( float rotationUV )

slot

Definition at line 827 of file qquick3dtexture.cpp.

References emit, qFuzzyCompare(), rotationUV, rotationUVChanged(), and QQuick3DObject::update().

Referenced by setTextureProperties().

Here is the call graph for this function:

Here is the caller graph for this function:

setScaleU

void QQuick3DTexture::setScaleU ( float scaleU )

slot

Definition at line 766 of file qquick3dtexture.cpp.

References emit, qFuzzyCompare(), scaleU, scaleUChanged(), and QQuick3DObject::update().

Referenced by setTextureProperties().

Here is the call graph for this function:

Here is the caller graph for this function:

setScaleV

void QQuick3DTexture::setScaleV ( float scaleV )

slot

Definition at line 777 of file qquick3dtexture.cpp.

References emit, qFuzzyCompare(), scaleV, scaleVChanged(), and QQuick3DObject::update().

Referenced by setTextureProperties().

Here is the call graph for this function:

Here is the caller graph for this function:

setSource

void QQuick3DTexture::setSource ( const QUrl & source )

slot

Definition at line 673 of file qquick3dtexture.cpp.

References emit, source, sourceChanged(), and QQuick3DObject::update().

Referenced by setMaterialProperties().

Here is the call graph for this function:

Here is the caller graph for this function:

setSourceItem

void QQuick3DTexture::setSourceItem ( QQuickItem * sourceItem )

slot

Definition at line 717 of file qquick3dtexture.cpp.

References QObject::connect(), QObject::destroyed(), disconnect(), emit, QQuickItemPrivate::Geometry, QQuick3DObjectPrivate::get(), QQuickItemPrivate::get(), hide(), manager, QQuickItem::setParentItem(), SIGNAL, SLOT, sourceItem, sourceItemChanged(), and QQuick3DObject::update().

Here is the call graph for this function:

setTextureData

void QQuick3DTexture::setTextureData ( QQuick3DTextureData * textureData )

slot

Definition at line 921 of file qquick3dtexture.cpp.

References QQuick3DObjectPrivate::attachWatcher(), QObject::connect(), QObject::disconnect(), emit, setTextureData(), textureData, textureDataChanged(), QQuick3DTextureData::textureDataNodeDirty(), and QQuick3DObject::update().

Referenced by setMaterialProperties(), and setTextureData().

Here is the call graph for this function:

Here is the caller graph for this function:

setVerticalTiling

void QQuick3DTexture::setVerticalTiling ( QQuick3DTexture::TilingMode tilingModeVertical )

slot

Definition at line 808 of file qquick3dtexture.cpp.

References emit, tilingModeVertical, QQuick3DObject::update(), and verticalTilingChanged().

Referenced by setTextureProperties().

Here is the call graph for this function:

Here is the caller graph for this function:

source()

QUrl QQuick3DTexture::source

(

)

const

\qmlproperty url QtQuick3D::Texture::source

This property holds the location of an image or texture file containing the data used by the texture.

The property is a URL, with the same rules as other source properties, such as \l{Image::source}{Image.source}. With Texture, only the qrc and file schemes are supported. When no scheme is present and the value is a relative path, it is assumed to be relative to the component's (i.e. the {.qml} file's) location.

The source file can have any conventional image file format \l{QImageReader::supportedImageFormats()}{supported by Qt}. In addition, Texture supports the same \l [QtQuick]{Compressed Texture Files}{compressed texture file types} as QtQuick::Image.

Note

Texture data read from image files such as .png or .jpg involves storing the rows of pixels within the texture in an order defined the Qt Quick 3D rendering engine. When the source file is a container for - possibly compressed - texture data, such transformations cannot happen on the pixel data level. Examples of this are .ktx or .pkm files. Instead, the Texture implicitly enables vertical flipping in the fragment shader code in order to get identical on-screen results. This is controlled by the \l autoOrientation property and can be disabled, if desired.

Some texture compression tools may apply automatic vertical mirroring (flipping) on the image data. In modern tools this is often an opt-in setting. It is important to be aware of the settings used in the asset conditioning pipeline, because an unexpectedly flipped texture, and thus incorrect texturing of objects, can have its root cause in the asset itself, outside the application's and rendering engine's control. When the asset requires it, applications can always set the \l flipV property themselves.

See also

sourceItem, textureData, autoOrientation, flipV

Definition at line 160 of file qquick3dtexture.cpp.

sourceChanged

void QQuick3DTexture::sourceChanged ( )

signal

Referenced by setSource().

Here is the caller graph for this function:

sourceItem()

QQuickItem * QQuick3DTexture::sourceItem

(

)

const

\qmlproperty Item QtQuick3D::Texture::sourceItem

This property defines a Item to be used as the source of the texture. Using this property allows any 2D Qt Quick content to be used as a texture source by rendering that item as an offscreen layer.

If the item is a \l{QQuickItem::textureProvider()}{texture provider}, no additional texture is used.

If this property is set, then the value of \l source will be ignored. A Texture should use one method to provide image data, and set only one of source, \l sourceItem, or \l textureData.

Note

Currently input events are forwarded to the Item used as a texture source only if the user is limited to interacting with one sourceItem instance at a time. In other words: you can share the same Item between multiple Textures, but then you cannot have multi-touch interaction with the same item on multiple textures at the same time. So it's best to use a separate 2D subscene instance for each Texture instance, if you expect to manipulate interactive items inside.

Using this property in a Texture that is referenced from multiple windows is strongly discouraged. This includes usage via \l{View3D::importScene}. As the source texture created by this property is only accessible by one render thread, attempting to share it between multiple QQuickWindow instances is going to fail, unless the basic render loop of Qt Quick is used instead of the default threaded one. See \l{Qt Quick Scene Graph} on more information about the Qt Quick render loops.

A Texture that contains the results of a Qt Quick offscreen render pass will in effect have an Y axis orientation that is different from what a Texture that receives its content via the source property uses. When used in combination with DefaultMaterial or PrincipledMaterial, this is all transparent to the application as the necessary UV transformations are applied automatically as long as the autoOrientation property is set to true, and so no further action is needed, regardless of how the texture was sourced. However, when developing \l{QtQuick3D::CustomMaterial}{custom materials} this needs to be kept in mind by the shader code author when sampling the texture and working with UV coordinates.

See also

source, textureData, autoOrientation

Definition at line 209 of file qquick3dtexture.cpp.

sourceItemChanged

void QQuick3DTexture::sourceItemChanged ( )

signal

Referenced by setSourceItem().

Here is the caller graph for this function:

textureData()

QQuick3DTextureData * QQuick3DTexture::textureData

(

)

const

\qmlproperty TextureData QtQuick3D::Texture::textureData

This property holds a reference to a \l TextureData component which defines the contents and properties of raw texture data.

If this property is used, then the value of \l source will be ignored. A Texture should use one method to provide image data, and set only one of source, \l sourceItem, or \l textureData.

See also

source, sourceItem, {Qt Quick 3D - Procedural Texture Example}

Definition at line 587 of file qquick3dtexture.cpp.

textureDataChanged

void QQuick3DTexture::textureDataChanged ( )

signal

Referenced by setTextureData().

Here is the caller graph for this function:

updateSpatialNode()

QSSGRenderGraphObject * QQuick3DTexture::updateSpatialNode ( QSSGRenderGraphObject * node )

overrideprotectedvirtual

Reimplemented from QQuick3DObject.

Definition at line 1069 of file qquick3dtexture.cpp.

References Qt::AutoConnection, QObject::connect(), context, QSGContext::createLayer(), QThread::currentThread(), QObject::destroyed(), Qt::DirectConnection, QSSGRenderImage::Dirty, disconnect(), QQuick3DObjectPrivate::get(), QQuickItemPrivate::get(), QRectF::height(), QSize::height(), QQuickItem::height, if(), QMetaMethod::invoke(), QUrl::isEmpty(), QQuickItem::isVisible(), QSSGRenderImage::m_depthTilingMode, QSSGRenderImage::m_extensionsSource, QSSGRenderImage::m_flags, QSSGRenderImage::m_flipU, QSSGRenderImage::m_generateMipmaps, QSSGRenderImage::m_horizontalTilingMode, QSSGRenderImage::m_imagePath, QSSGRenderImage::m_indexUV, QSSGRenderImage::m_magFilterType, QSSGRenderImage::m_mappingMode, QSSGRenderImage::m_minFilterType, QSSGRenderImage::m_mipFilterType, QSSGRenderImage::m_pivot, QSSGRenderImage::m_position, QSSGRenderImage::m_qsgTexture, QSSGRenderImage::m_rawTextureData, QSSGRenderImage::m_rotation, QSSGRenderImage::m_scale, QSSGRenderImage::m_verticalTilingMode, manager, markAllDirty(), minTextureSize, Q_ASSERT, qAbs(), qCeil(), qFuzzyIsNull(), qmlContext(), QSSG_GUARD, qUpdateIfNeeded(), qWarning, resolveImagePath(), QSize::rheight(), QSize::rwidth(), QSGRenderContext::sceneGraphContext(), QRectF::setHeight(), QSGLayer::setItem(), QRectF::setWidth(), SIGNAL, QQuickItem::size(), SLOT, sourceItem, QSGTextureProvider::textureChanged(), QQuickItem::textureProvider(), QObject::thread(), QSSGRenderImage::TransformDirty, QQuick3DObject::update(), QQuick3DObject::updateSpatialNode(), QSGDynamicTexture::updateTexture(), QRectF::width(), QSize::width(), QQuickItem::width, window(), and QQuickItem::window().

Here is the call graph for this function:

verticalTiling()

QQuick3DTexture::TilingMode QQuick3DTexture::verticalTiling

(

)

const

\qmlproperty enumeration QtQuick3D::Texture::tilingModeVertical

This property controls how the texture is mapped when the V scaling value is greater than 1.

By default, this property is set to {Texture.Repeat}.

\value Texture.ClampToEdge Texture is not tiled, but the value on the edge is used instead. \value Texture.MirroredRepeat Texture is repeated and mirrored over the Y axis. \value Texture.Repeat Texture is repeated over the Y axis.

See also

scaleV

Definition at line 323 of file qquick3dtexture.cpp.

Referenced by QQuick3DEffect::updateSpatialNode().

Here is the caller graph for this function:

verticalTilingChanged

void QQuick3DTexture::verticalTilingChanged ( )

signal

Referenced by setVerticalTiling().

Here is the caller graph for this function:

Property Documentation

autoOrientation

bool QQuick3DTexture::autoOrientation

readwrite

Definition at line 57 of file qquick3dtexture_p.h.

Referenced by setAutoOrientation().

flipU

bool QQuick3DTexture::flipU

readwrite

Definition at line 50 of file qquick3dtexture_p.h.

Referenced by setFlipU().

flipV

bool QQuick3DTexture::flipV

readwrite

Definition at line 51 of file qquick3dtexture_p.h.

Referenced by setFlipV().

generateMipmaps

bool QQuick3DTexture::generateMipmaps

readwrite

Definition at line 56 of file qquick3dtexture_p.h.

Referenced by setGenerateMipmaps(), and QQuick3DEffect::updateSpatialNode().

indexUV

int QQuick3DTexture::indexUV

readwrite

Definition at line 52 of file qquick3dtexture_p.h.

Referenced by setIndexUV().

magFilter

Filter QQuick3DTexture::magFilter

readwrite

Definition at line 53 of file qquick3dtexture_p.h.

Referenced by setMagFilter(), and QQuick3DEffect::updateSpatialNode().

mappingMode

MappingMode QQuick3DTexture::mappingMode

readwrite

Definition at line 41 of file qquick3dtexture_p.h.

Referenced by setMappingMode().

minFilter

Filter QQuick3DTexture::minFilter

readwrite

Definition at line 54 of file qquick3dtexture_p.h.

Referenced by setMinFilter(), and QQuick3DEffect::updateSpatialNode().

mipFilter

Filter QQuick3DTexture::mipFilter

readwrite

Definition at line 55 of file qquick3dtexture_p.h.

Referenced by setMipFilter(), and QQuick3DEffect::updateSpatialNode().

pivotU

float QQuick3DTexture::pivotU

readwrite

Definition at line 48 of file qquick3dtexture_p.h.

Referenced by setPivotU().

pivotV

float QQuick3DTexture::pivotV

readwrite

Definition at line 49 of file qquick3dtexture_p.h.

Referenced by setPivotV().

positionU

float QQuick3DTexture::positionU

readwrite

Definition at line 46 of file qquick3dtexture_p.h.

Referenced by setPositionU().

positionV

float QQuick3DTexture::positionV

readwrite

Definition at line 47 of file qquick3dtexture_p.h.

Referenced by setPositionV().

rotationUV

float QQuick3DTexture::rotationUV

readwrite

Definition at line 45 of file qquick3dtexture_p.h.

Referenced by setRotationUV().

scaleU

float QQuick3DTexture::scaleU

readwrite

Definition at line 39 of file qquick3dtexture_p.h.

Referenced by setScaleU().

scaleV

float QQuick3DTexture::scaleV

readwrite

Definition at line 40 of file qquick3dtexture_p.h.

Referenced by setScaleV().

source

QUrl QQuick3DTexture::source

readwrite

Definition at line 35 of file qquick3dtexture_p.h.

Referenced by setSource().

sourceItem

QQuickItem * QQuick3DTexture::sourceItem

readwrite

Definition at line 36 of file qquick3dtexture_p.h.

Referenced by setSourceItem(), and updateSpatialNode().

textureData

QQuick3DTextureData * QQuick3DTexture::textureData

readwrite

Definition at line 37 of file qquick3dtexture_p.h.

Referenced by setTextureData(), QQuick3DCustomMaterial::updateSpatialNode(), and QQuick3DEffect::updateSpatialNode().

textureProvider

QQuick3DRenderExtension * QQuick3DTexture::textureProvider

readwrite

\qmlproperty RenderExtension QtQuick3D::Texture::textureProvider

This property holds the RenderExtension that will provide the \l QRhiTexture that will be used by this item.

Note

The texture created by RenderExtension needs to be made available by \l{QSSGRenderExtensionHelpers::registerRenderResult}{registering} it with the engine.

Since

6.7

See also

RenderExtension, QSSGRenderExtensionHelpers

Definition at line 38 of file qquick3dtexture_p.h.

tilingModeDepth

TilingMode QQuick3DTexture::tilingModeDepth

readwrite

Definition at line 44 of file qquick3dtexture_p.h.

tilingModeHorizontal

TilingMode QQuick3DTexture::tilingModeHorizontal

readwrite

Definition at line 42 of file qquick3dtexture_p.h.

Referenced by setHorizontalTiling().

tilingModeVertical

TilingMode QQuick3DTexture::tilingModeVertical

readwrite

Definition at line 43 of file qquick3dtexture_p.h.

Referenced by setVerticalTiling().

---

The documentation for this class was generated from the following files:

• qtquick3d/src/quick3d/qquick3dtexture_p.h (2ab65f8a45ae729ae58778e6a07ad294e118c75b)
• qtquick3d/src/quick3d/qquick3dtexture.cpp (fb348df3b219508a01770bed6145066300e3585c)