#include <qquickpath_p.h>

Inheritance diagram for QQuickPath:

Collaboration diagram for QQuickPath:

Signals
void	changed ()

void	startXChanged ()

void	startYChanged ()

	Q_REVISION (6, 6) void simplifyChanged()

	Q_REVISION (2, 14) void scaleChanged()

Signals inherited from QObject
void	destroyed (QObject *=nullptr)
	This signal is emitted immediately before the object obj is destroyed, after any instances of QPointer have been notified, and cannot be blocked.

void	objectNameChanged (const QString &objectName, QPrivateSignal)
	This signal is emitted after the object's name has been changed.

Public Member Functions
	QQuickPath (QObject *parent=nullptr)
	\qmltype PathElement \instantiates QQuickPathElement \inqmlmodule QtQuick

	~QQuickPath () override

QQmlListProperty< QQuickPathElement >	pathElements ()

qreal	startX () const
	\qmlproperty real QtQuick::Path::startX \qmlproperty real QtQuick::Path::startY These properties hold the starting position of the path.

void	setStartX (qreal x)

bool	hasStartX () const

qreal	startY () const

void	setStartY (qreal y)

bool	hasStartY () const

bool	isClosed () const
	\qmlproperty bool QtQuick::Path::closed This property holds whether the start and end of the path are identical.

QPainterPath	path () const

QStringList	attributes () const

qreal	attributeAt (const QString &, qreal) const

	Q_REVISION (2, 14) Q_INVOKABLE QPointF pointAtPercent(qreal t) const

QPointF	sequentialPointAt (qreal p, qreal *angle=nullptr) const

void	invalidateSequentialHistory () const

QSizeF	scale () const
	\qmlproperty size QtQuick::Path::scale

void	setScale (const QSizeF &scale)

bool	simplify () const

void	setSimplify (bool s)
	\qmlproperty bool QtQuick::Path::simplify

QPainterPath	createPath (const QPointF &startPoint, const QPointF &endPoint, const QStringList &attributes, qreal &pathLength, QList< AttributePoint > &attributePoints, bool *closed=nullptr)

QPainterPath	createShapePath (const QPointF &startPoint, const QPointF &endPoint, qreal &pathLength, bool *closed=nullptr)

Public Member Functions inherited from QObject
Q_INVOKABLE	QObject (QObject *parent=nullptr)
	Constructs an object with parent object parent.

virtual	~QObject ()
	Destroys the object, deleting all its child objects.

virtual bool	event (QEvent *event)
	This virtual function receives events to an object and should return true if the event e was recognized and processed.

virtual bool	eventFilter (QObject watched, QEvent event)
	Filters events if this object has been installed as an event filter for the watched object.

QString	objectName () const

Q_WEAK_OVERLOAD void	setObjectName (const QString &name)
	Sets the object's name to name.

void	setObjectName (QAnyStringView name)
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

QBindable< QString >	bindableObjectName ()

bool	isWidgetType () const
	Returns `true` if the object is a widget; otherwise returns `false`.

bool	isWindowType () const
	Returns `true` if the object is a window; otherwise returns `false`.

bool	isQuickItemType () const
	Returns `true` if the object is a QQuickItem; otherwise returns `false`.

bool	signalsBlocked () const noexcept
	Returns `true` if signals are blocked; otherwise returns `false`.

bool	blockSignals (bool b) noexcept
	If block is true, signals emitted by this object are blocked (i.e., emitting a signal will not invoke anything connected to it).

QThread *	thread () const
	Returns the thread in which the object lives.

bool	moveToThread (QThread *thread QT6_DECL_NEW_OVERLOAD_TAIL)
	Changes the thread affinity for this object and its children and returns `true` on success.

int	startTimer (int interval, Qt::TimerType timerType=Qt::CoarseTimer)
	This is an overloaded function that will start a timer of type timerType and a timeout of interval milliseconds.

int	startTimer (std::chrono::nanoseconds time, Qt::TimerType timerType=Qt::CoarseTimer)

void	killTimer (int id)
	Kills the timer with timer identifier, id.

void	killTimer (Qt::TimerId id)

template<typename T >
T	findChild (QAnyStringView aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	Returns the child of this object that can be cast into type T and that is called name, or \nullptr if there is no such object.

template<typename T >
QList< T >	findChildren (QAnyStringView aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects.

template<typename T >
T	findChild (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

template<typename T >
QList< T >	findChildren (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

const QObjectList &	children () const
	Returns a list of child objects.

void	setParent (QObject *parent)
	Makes the object a child of parent.

void	installEventFilter (QObject *filterObj)
	Installs an event filter filterObj on this object.

void	removeEventFilter (QObject *obj)
	Removes an event filter object obj from this object.

QMetaObject::Connection	connect (const QObject sender, const char signal, const char *member, Qt::ConnectionType type=Qt::AutoConnection) const

bool	disconnect (const char signal=nullptr, const QObject receiver=nullptr, const char *member=nullptr) const

bool	disconnect (const QObject receiver, const char member=nullptr) const

void	dumpObjectTree () const
	Dumps a tree of children to the debug output.

void	dumpObjectInfo () const
	Dumps information about signal connections, etc.

bool	setProperty (const char *name, const QVariant &value)
	Sets the value of the object's name property to value.

bool	setProperty (const char *name, QVariant &&value)

QVariant	property (const char *name) const
	Returns the value of the object's name property.

QList< QByteArray >	dynamicPropertyNames () const

QBindingStorage *	bindingStorage ()

const QBindingStorage *	bindingStorage () const

QObject *	parent () const
	Returns a pointer to the parent object.

bool	inherits (const char *classname) const
	Returns `true` if this object is an instance of a class that inherits className or a QObject subclass that inherits className; otherwise returns `false`.

Public Member Functions inherited from QQmlParserStatus
	QQmlParserStatus ()

virtual	~QQmlParserStatus ()

Static Public Member Functions
static QPointF	sequentialPointAt (const QPainterPath &path, const qreal &pathLength, const QList< AttributePoint > &attributePoints, QQuickCachedBezier &prevBez, qreal p, qreal *angle=nullptr)

Static Public Member Functions inherited from QObject
static QMetaObject::Connection	connect (const QObject sender, const char signal, const QObject receiver, const char member, Qt::ConnectionType=Qt::AutoConnection)
	\threadsafe

static QMetaObject::Connection	connect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &method, Qt::ConnectionType type=Qt::AutoConnection)

template<typename Func1 , typename Func2 >
static QMetaObject::Connection	connect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const typename QtPrivate::ContextTypeForFunctor< Func2 >::ContextType context, Func2 &&slot, Qt::ConnectionType type=Qt::AutoConnection)

template<typename Func1 , typename Func2 >
static QMetaObject::Connection	connect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, Func2 &&slot)

static bool	disconnect (const QObject sender, const char signal, const QObject receiver, const char member)
	\threadsafe

static bool	disconnect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &member)

static bool	disconnect (const QMetaObject::Connection &)
	Disconnect a connection.

template<typename Func1 , typename Func2 >
static bool	disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const typename QtPrivate::FunctionPointer< Func2 >::Object receiver, Func2 slot)

template<typename Func1 >
static bool	disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const QObject receiver, void **zero)

Protected Member Functions
	QQuickPath (QQuickPathPrivate &dd, QObject *parent=nullptr)

void	componentComplete () override
	Invoked after the root component that caused this instantiation has completed construction.

void	classBegin () override
	Invoked after class creation, but before any properties have been set.

void	disconnectPathElements ()

void	connectPathElements ()

void	gatherAttributes ()

Protected Member Functions inherited from QObject
QObject *	sender () const
	Returns a pointer to the object that sent the signal, if called in a slot activated by a signal; otherwise it returns \nullptr.

int	senderSignalIndex () const

int	receivers (const char *signal) const
	Returns the number of receivers connected to the signal.

bool	isSignalConnected (const QMetaMethod &signal) const

virtual void	timerEvent (QTimerEvent *event)
	This event handler can be reimplemented in a subclass to receive timer events for the object.

virtual void	childEvent (QChildEvent *event)
	This event handler can be reimplemented in a subclass to receive child events.

virtual void	customEvent (QEvent *event)
	This event handler can be reimplemented in a subclass to receive custom events.

virtual void	connectNotify (const QMetaMethod &signal)

virtual void	disconnectNotify (const QMetaMethod &signal)

	QObject (QObjectPrivate &dd, QObject *parent=nullptr)

Static Protected Member Functions
static QQuickPathElement *	pathElements_at (QQmlListProperty< QQuickPathElement > *, qsizetype)

static void	pathElements_append (QQmlListProperty< QQuickPathElement > , QQuickPathElement )

static qsizetype	pathElements_count (QQmlListProperty< QQuickPathElement > *)

static void	pathElements_clear (QQmlListProperty< QQuickPathElement > *)

Properties
QQmlListProperty< QQuickPathElement >	pathElements
	\qmlproperty list<PathElement> QtQuick::Path::pathElements This property holds the objects composing the path.

qreal	startX

qreal	startY

bool	closed

bool	simplify

FINALQSizeF	scale

Properties inherited from QObject
QString	objectName
	the name of this object

Friends
class	QQuickPathAnimationUpdater

Additional Inherited Members
Public Slots inherited from QObject
void	deleteLater ()
	\threadsafe

Protected Attributes inherited from QObject
QScopedPointer< QObjectData >	d_ptr

Related Symbols inherited from QObject
template< class T > T	qobject_cast (const QObject *object)
	Returns the given object cast to type T if the object is of type T (or of a subclass); otherwise returns \nullptr.

template< typename T > T	qFindChildqFindChildren (const QObject *obj, const QString &name)()

template< typename T > QList< T >	qFindChildrenqFindChildren (const QObject *obj, const QString &name)()

	QObjectList
	\macro Q_CLASSINFO(Name, Value)

Detailed Description

Definition at line 481 of file qquickpath_p.h.

Constructor & Destructor Documentation

◆ QQuickPath() [1/2]

QT_BEGIN_NAMESPACE QQuickPath::QQuickPath ( QObject * parent = nullptr )

\qmltype PathElement \instantiates QQuickPathElement \inqmlmodule QtQuick

PathElement is the base path type.

This type is the base for all path types. It cannot be instantiated.

See also: Path, PathAttribute, PathPercent, PathLine, PathPolyline, PathQuad, PathCubic, PathArc, PathAngleArc, PathCurve, PathSvg

\qmltype Path \instantiates QQuickPath \inqmlmodule QtQuick

Defines a path for use by \l PathView and \l Shape.

A Path is composed of one or more path segments - PathLine, PathPolyline, PathQuad, PathCubic, PathArc, PathAngleArc, PathCurve, PathSvg.

The spacing of the items along the Path can be adjusted via a PathPercent object.

PathAttribute allows named attributes with values to be defined along the path.

Path and the other types for specifying path elements are shared between \l PathView and \l Shape. The following table provides an overview of the applicability of the various path elements:

\table \header

Element
PathView
Shape
Shape, software \row
PathMove
N/A
Yes
Yes \row
PathLine
Yes
Yes
Yes \row
PathPolyline
Yes
Yes
Yes \row
PathMultiLine
Yes
Yes
Yes \row
PathQuad
Yes
Yes
Yes \row
PathCubic
Yes
Yes
Yes \row
PathArc
Yes
Yes
Yes \row
PathAngleArc
Yes
Yes
Yes \row
PathSvg
Yes
Yes
Yes \row
PathAttribute
Yes
N/A
N/A \row
PathPercent
Yes
N/A
N/A \row
PathCurve
Yes
No
No \endtable

Note: Path is a non-visual type; it does not display anything on its own. To draw a path, use \l Shape.

See also: PathView, Shape, PathAttribute, PathPercent, PathLine, PathPolyline, PathMove, PathQuad, PathCubic, PathArc, PathAngleArc, PathCurve, PathSvg

Definition at line 124 of file qquickpath.cpp.

◆ ~QQuickPath()

QQuickPath::~QQuickPath ( )

override

Definition at line 134 of file qquickpath.cpp.

◆ QQuickPath() [2/2]

QQuickPath::QQuickPath	(	QQuickPathPrivate &	dd,
		QObject *	parent = nullptr )

protected

Definition at line 129 of file qquickpath.cpp.

Member Function Documentation

◆ attributeAt()

qreal QQuickPath::attributeAt	(	const QString &	name,
		qreal	percent ) const

Definition at line 954 of file qquickpath.cpp.

References d, and QHash< Key, T >::value().

Here is the call graph for this function:

◆ attributes()

QStringList QQuickPath::attributes ( ) const

Definition at line 586 of file qquickpath.cpp.

References attrs, and d.

Referenced by createPath(), and gatherAttributes().

Here is the caller graph for this function:

◆ changed

void QQuickPath::changed ( )

signal

Referenced by QQuickShapePath::QQuickShapePath(), connectPathElements(), disconnectPathElements(), and pathElements_append().

Here is the caller graph for this function:

◆ classBegin()

void QQuickPath::classBegin ( )

overrideprotectedvirtual

Invoked after class creation, but before any properties have been set.

Implements QQmlParserStatus.

Definition at line 527 of file qquickpath.cpp.

References d.

◆ componentComplete()

void QQuickPath::componentComplete ( )

overrideprotectedvirtual

Invoked after the root component that caused this instantiation has completed construction.

At this point all static values and binding values have been assigned to the class.

Implements QQmlParserStatus.

Definition at line 568 of file qquickpath.cpp.

References connectPathElements(), d, and gatherAttributes().

Here is the call graph for this function:

◆ connectPathElements()

void QQuickPath::connectPathElements ( )

protected

Definition at line 541 of file qquickpath.cpp.

References changed(), QObject::connect(), d, SIGNAL, and SLOT.

Referenced by componentComplete().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ createPath()

QPainterPath QQuickPath::createPath	(	const QPointF &	startPoint,
		const QPointF &	endPoint,
		const QStringList &	attributes,
		qreal &	pathLength,
		QList< AttributePoint > &	attributePoints,
		bool *	closed = nullptr )

Definition at line 394 of file qquickpath.cpp.

References attributes(), closed, QHash< Key, T >::contains(), d, QQuickPathData::index, path(), QStringLiteral, scale, scalePath(), startX, startY, text, QHash< Key, T >::value(), QPointF::x(), and QPointF::y().

Here is the call graph for this function:

◆ createShapePath()

QPainterPath QQuickPath::createShapePath	(	const QPointF &	startPoint,
		const QPointF &	endPoint,
		qreal &	pathLength,
		bool *	closed = nullptr )

Definition at line 487 of file qquickpath.cpp.

References closed, d, QQuickPathData::index, path(), scalePath(), startX, startY, text, QPointF::x(), and QPointF::y().

Here is the call graph for this function:

◆ disconnectPathElements()

void QQuickPath::disconnectPathElements ( )

protected

Definition at line 533 of file qquickpath.cpp.

References changed(), d, disconnect(), SIGNAL, and SLOT.

Referenced by pathElements_clear().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ gatherAttributes()

void QQuickPath::gatherAttributes ( )

protected

Definition at line 549 of file qquickpath.cpp.

References attributes(), d, and text.

Referenced by componentComplete().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ hasStartX()

bool QQuickPath::hasStartX ( ) const

Definition at line 159 of file qquickpath.cpp.

References d.

◆ hasStartY()

bool QQuickPath::hasStartY ( ) const

Definition at line 181 of file qquickpath.cpp.

References d.

◆ invalidateSequentialHistory()

void QQuickPath::invalidateSequentialHistory ( ) const

Definition at line 712 of file qquickpath.cpp.

References d.

◆ isClosed()

bool QQuickPath::isClosed ( ) const

\qmlproperty bool QtQuick::Path::closed This property holds whether the start and end of the path are identical.

Definition at line 191 of file qquickpath.cpp.

References d.

◆ path()

QPainterPath QQuickPath::path ( ) const

Definition at line 580 of file qquickpath.cpp.

References d.

Referenced by createPath(), and createShapePath().

Here is the caller graph for this function:

◆ pathElements()

QQmlListProperty< QQuickPathElement > QQuickPath::pathElements ( )

◆ pathElements_append()

void QQuickPath::pathElements_append	(	QQmlListProperty< QQuickPathElement > *	property,
		QQuickPathElement *	pathElement )

staticprotected

Definition at line 245 of file qquickpath.cpp.

References changed(), QObject::connect(), d, privatePath(), property, SIGNAL, SLOT, and text.

Here is the call graph for this function:

◆ pathElements_at()

QQuickPathElement * QQuickPath::pathElements_at	(	QQmlListProperty< QQuickPathElement > *	property,
		qsizetype	index )

staticprotected

Definition at line 238 of file qquickpath.cpp.

References d, privatePath(), and property.

Here is the call graph for this function:

◆ pathElements_clear()

void QQuickPath::pathElements_clear ( QQmlListProperty< QQuickPathElement > * property )

staticprotected

Definition at line 277 of file qquickpath.cpp.

References d, disconnectPathElements(), privatePath(), and property.

Here is the call graph for this function:

◆ pathElements_count()

qsizetype QQuickPath::pathElements_count ( QQmlListProperty< QQuickPathElement > * property )

staticprotected

Definition at line 270 of file qquickpath.cpp.

References d, privatePath(), and property.

Here is the call graph for this function:

◆ Q_REVISION() [1/3]

QQuickPath::Q_REVISION	(	2	,
		14	) const

◆ Q_REVISION [2/3]

QQuickPath::Q_REVISION	(	2	,
		14	)

signal

References other().

Here is the call graph for this function:

◆ Q_REVISION [3/3]

QQuickPath::Q_REVISION	(	6	,
		6	)

signal

◆ scale()

QSizeF QQuickPath::scale ( ) const

\qmlproperty size QtQuick::Path::scale

This property holds the scale factor for the path. The width and height of scale can be different, to achieve anisotropic scaling.

Note: Setting this property will not affect the border width.

Since: QtQuick 2.14

Definition at line 755 of file qquickpath.cpp.

References d.

◆ sequentialPointAt() [1/2]

QPointF QQuickPath::sequentialPointAt	(	const QPainterPath &	path,
		const qreal &	pathLength,
		const QList< AttributePoint > &	attributePoints,
		QQuickCachedBezier &	prevBez,
		qreal	p,
		qreal *	angle = nullptr )

static

Definition at line 777 of file qquickpath.cpp.

References QQuickCachedBezier::isValid, QQuickCachedBezier::p, and Q_ASSERT.

◆ sequentialPointAt() [2/2]

QPointF QQuickPath::sequentialPointAt	(	qreal	p,
		qreal *	angle = nullptr ) const

Definition at line 771 of file qquickpath.cpp.

References d, and sequentialPointAt().

Referenced by sequentialPointAt().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ setScale()

void QQuickPath::setScale ( const QSizeF & scale )

Definition at line 761 of file qquickpath.cpp.

References d, emit, and scale.

◆ setSimplify()

void QQuickPath::setSimplify ( bool s )

\qmlproperty bool QtQuick::Path::simplify

Since: 6.6

When set to true, the path will be simplified. This implies merging all subpaths that intersect, creating a path where there are no self-intersections. Consecutive parallel lines will also be merged. The simplified path is intended to be used with ShapePath.OddEvenFill. Bezier curves may be flattened to line segments due to numerical instability of doing bezier curve intersections.

Definition at line 726 of file qquickpath.cpp.

References d, and emit.

◆ setStartX()

void QQuickPath::setStartX ( qreal x )

Definition at line 149 of file qquickpath.cpp.

References d, emit, qFuzzyCompare(), and startXChanged().

Here is the call graph for this function:

◆ setStartY()

void QQuickPath::setStartY ( qreal y )

Definition at line 171 of file qquickpath.cpp.

References d, emit, qFuzzyCompare(), and startYChanged().

Here is the call graph for this function:

◆ simplify()

bool QQuickPath::simplify ( ) const

Definition at line 738 of file qquickpath.cpp.

References d.

◆ startX()

qreal QQuickPath::startX ( ) const

\qmlproperty real QtQuick::Path::startX \qmlproperty real QtQuick::Path::startY These properties hold the starting position of the path.

Definition at line 143 of file qquickpath.cpp.

References d.

◆ startXChanged

void QQuickPath::startXChanged ( )

signal

Referenced by setStartX().

Here is the caller graph for this function:

◆ startY()

qreal QQuickPath::startY ( ) const

Definition at line 165 of file qquickpath.cpp.

References d.

◆ startYChanged

void QQuickPath::startYChanged ( )

signal

Referenced by setStartY().

Here is the caller graph for this function:

Friends And Related Symbol Documentation

◆ QQuickPathAnimationUpdater

friend class QQuickPathAnimationUpdater

friend

Definition at line 574 of file qquickpath_p.h.

Property Documentation

◆ closed

bool QQuickPath::closed

read

Definition at line 489 of file qquickpath_p.h.

Referenced by createPath(), and createShapePath().

◆ pathElements

QQmlListProperty< QQuickPathElement > QQuickPath::pathElements

read

\qmlproperty list<PathElement> QtQuick::Path::pathElements This property holds the objects composing the path.

\qmldefault

A path can contain the following path objects: \list

\l PathLine - a straight line to a given position.
\l PathPolyline - a polyline specified as a list of coordinates.
\l PathMultiline - a list of polylines specified as a list of lists of coordinates.
\l PathQuad - a quadratic Bezier curve to a given position with a control point.
\l PathCubic - a cubic Bezier curve to a given position with two control points.
\l PathArc - an arc to a given position with a radius.
\l PathAngleArc - an arc specified by center point, radii, and angles.
\l PathSvg - a path specified as an SVG path data string.
\l PathCurve - a point on a Catmull-Rom curve.
\l PathAttribute - an attribute at a given position in the path.
\l PathPercent - a way to spread out items along various segments of the path. \endlist

    PathView {
        anchors.fill: parent
        model: ContactModel {}
        delegate: delegate
        path: Path {
            startX: 120; startY: 100
            PathAttribute { name: "iconScale"; value: 1.0 }
            PathAttribute { name: "iconOpacity"; value: 1.0 }
            PathQuad { x: 120; y: 25; controlX: 260; controlY: 75 }
            PathAttribute { name: "iconScale"; value: 0.3 }
            PathAttribute { name: "iconOpacity"; value: 0.5 }
            PathQuad { x: 120; y: 100; controlX: -20; controlY: 75 }
        }
    }

Definition at line 486 of file qquickpath_p.h.

Referenced by QDeclarativeCircleMapItemPrivateCPU::QDeclarativeCircleMapItemPrivateCPU(), QDeclarativePolygonMapItemPrivateCPU::QDeclarativePolygonMapItemPrivateCPU(), QDeclarativePolylineMapItemPrivateCPU::QDeclarativePolylineMapItemPrivateCPU(), and QDeclarativeRectangleMapItemPrivateCPU::QDeclarativeRectangleMapItemPrivateCPU().

◆ scale

FINALQSizeF QQuickPath::scale

readwrite

Definition at line 491 of file qquickpath_p.h.

Referenced by createPath(), and setScale().

◆ simplify

bool QQuickPath::simplify

readwrite

Definition at line 490 of file qquickpath_p.h.

◆ startX

qreal QQuickPath::startX

readwrite

Definition at line 487 of file qquickpath_p.h.

Referenced by createPath(), and createShapePath().

◆ startY

qreal QQuickPath::startY

readwrite

Definition at line 488 of file qquickpath_p.h.

Referenced by createPath(), and createShapePath().

The documentation for this class was generated from the following files:

qtdeclarative/src/quick/util/qquickpath_p.h (bd131dcbf579f822ac8cee98324dc1355f7cd314)
qtdeclarative/src/quick/util/qquickpath.cpp (5f72764c876058e290e42b0b2f1e77d59f4c914d)

Signals

Public Member Functions

Static Public Member Functions

Protected Member Functions

Static Protected Member Functions

Properties

Friends

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ QQuickPath() [1/2]

◆ ~QQuickPath()

◆ QQuickPath() [2/2]

Member Function Documentation

◆ attributeAt()

◆ attributes()

◆ changed

◆ classBegin()

◆ componentComplete()

◆ connectPathElements()

◆ createPath()

◆ createShapePath()

◆ disconnectPathElements()

◆ gatherAttributes()

◆ hasStartX()

◆ hasStartY()

◆ invalidateSequentialHistory()

◆ isClosed()

◆ path()

◆ pathElements()

◆ pathElements_append()

◆ pathElements_at()

◆ pathElements_clear()

◆ pathElements_count()

◆ Q_REVISION() [1/3]

◆ Q_REVISION [2/3]

◆ Q_REVISION [3/3]

◆ scale()

◆ sequentialPointAt() [1/2]

◆ sequentialPointAt() [2/2]

◆ setScale()

◆ setSimplify()

◆ setStartX()

◆ setStartY()

◆ simplify()

◆ startX()

◆ startXChanged

◆ startY()

◆ startYChanged

Friends And Related Symbol Documentation

◆ QQuickPathAnimationUpdater

Property Documentation

◆ closed

◆ pathElements

◆ scale

◆ simplify

◆ startX

◆ startY