#include <qgeoroutingmanagerengineosm.h>

Inheritance diagram for QGeoRoutingManagerEngineOsm:

Collaboration diagram for QGeoRoutingManagerEngineOsm:

Public Member Functions
	QGeoRoutingManagerEngineOsm (const QVariantMap &parameters, QGeoServiceProvider::Error error, QString errorString)

	~QGeoRoutingManagerEngineOsm ()

QGeoRouteReply *	calculateRoute (const QGeoRouteRequest &request) override

const QGeoRouteParser *	routeParser () const

Public Member Functions inherited from QGeoRoutingManagerEngine
	QGeoRoutingManagerEngine (const QVariantMap &parameters, QObject *parent=nullptr)
	Constructs a new engine with the specified parent, using parameters to pass any implementation specific data to the engine.

virtual	~QGeoRoutingManagerEngine ()
	Destroys this engine.

QString	managerName () const
	Returns the name which this engine implementation uses to distinguish itself from the implementations provided by other plugins.

int	managerVersion () const
	Returns the version of this engine implementation.

virtual QGeoRouteReply *	updateRoute (const QGeoRoute &route, const QGeoCoordinate &position)
	Begins the process of updating route based on the current position position.

QGeoRouteRequest::TravelModes	supportedTravelModes () const
	Returns the travel modes supported by this engine.

QGeoRouteRequest::FeatureTypes	supportedFeatureTypes () const
	Returns the types of features that this engine can take into account during route planning.

QGeoRouteRequest::FeatureWeights	supportedFeatureWeights () const
	Returns the weightings which this engine can apply to different features during route planning.

QGeoRouteRequest::RouteOptimizations	supportedRouteOptimizations () const
	Returns the route optimizations supported by this engine.

QGeoRouteRequest::SegmentDetails	supportedSegmentDetails () const
	Returns the levels of detail for routing segments which can be requested by this engine.

QGeoRouteRequest::ManeuverDetails	supportedManeuverDetails () const
	Returns the levels of detail for navigation maneuvers which can be requested by this engine.

void	setLocale (const QLocale &locale)
	Sets the locale to be used by this manager to locale.

QLocale	locale () const
	Returns the locale used to hint to this routing manager about what language to use for addresses and instructions.

void	setMeasurementSystem (QLocale::MeasurementSystem system)
	Sets the measurement system used by this manager to system.

QLocale::MeasurementSystem	measurementSystem () const
	Returns the measurement system used by this manager.

Public Member Functions inherited from QObject
Q_INVOKABLE	QObject (QObject *parent=nullptr)
	Constructs an object with parent object parent.

virtual	~QObject ()
	Destroys the object, deleting all its child objects.

virtual bool	event (QEvent *event)
	This virtual function receives events to an object and should return true if the event e was recognized and processed.

virtual bool	eventFilter (QObject watched, QEvent event)
	Filters events if this object has been installed as an event filter for the watched object.

QString	objectName () const

Q_WEAK_OVERLOAD void	setObjectName (const QString &name)
	Sets the object's name to name.

void	setObjectName (QAnyStringView name)
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

QBindable< QString >	bindableObjectName ()

bool	isWidgetType () const
	Returns `true` if the object is a widget; otherwise returns `false`.

bool	isWindowType () const
	Returns `true` if the object is a window; otherwise returns `false`.

bool	isQuickItemType () const
	Returns `true` if the object is a QQuickItem; otherwise returns `false`.

bool	signalsBlocked () const noexcept
	Returns `true` if signals are blocked; otherwise returns `false`.

bool	blockSignals (bool b) noexcept
	If block is true, signals emitted by this object are blocked (i.e., emitting a signal will not invoke anything connected to it).

QThread *	thread () const
	Returns the thread in which the object lives.

bool	moveToThread (QThread *thread QT6_DECL_NEW_OVERLOAD_TAIL)
	Changes the thread affinity for this object and its children and returns `true` on success.

int	startTimer (int interval, Qt::TimerType timerType=Qt::CoarseTimer)
	This is an overloaded function that will start a timer of type timerType and a timeout of interval milliseconds.

int	startTimer (std::chrono::nanoseconds time, Qt::TimerType timerType=Qt::CoarseTimer)

void	killTimer (int id)
	Kills the timer with timer identifier, id.

void	killTimer (Qt::TimerId id)

template<typename T >
T	findChild (QAnyStringView aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	Returns the child of this object that can be cast into type T and that is called name, or \nullptr if there is no such object.

template<typename T >
QList< T >	findChildren (QAnyStringView aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects.

template<typename T >
T	findChild (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

template<typename T >
QList< T >	findChildren (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

const QObjectList &	children () const
	Returns a list of child objects.

void	setParent (QObject *parent)
	Makes the object a child of parent.

void	installEventFilter (QObject *filterObj)
	Installs an event filter filterObj on this object.

void	removeEventFilter (QObject *obj)
	Removes an event filter object obj from this object.

QMetaObject::Connection	connect (const QObject sender, const char signal, const char *member, Qt::ConnectionType type=Qt::AutoConnection) const

bool	disconnect (const char signal=nullptr, const QObject receiver=nullptr, const char *member=nullptr) const

bool	disconnect (const QObject receiver, const char member=nullptr) const

void	dumpObjectTree () const
	Dumps a tree of children to the debug output.

void	dumpObjectInfo () const
	Dumps information about signal connections, etc.

bool	setProperty (const char *name, const QVariant &value)
	Sets the value of the object's name property to value.

bool	setProperty (const char *name, QVariant &&value)

QVariant	property (const char *name) const
	Returns the value of the object's name property.

QList< QByteArray >	dynamicPropertyNames () const

QBindingStorage *	bindingStorage ()

const QBindingStorage *	bindingStorage () const

QObject *	parent () const
	Returns a pointer to the parent object.

bool	inherits (const char *classname) const
	Returns `true` if this object is an instance of a class that inherits className or a QObject subclass that inherits className; otherwise returns `false`.

Additional Inherited Members
Public Slots inherited from QObject
void	deleteLater ()
	\threadsafe

Signals inherited from QGeoRoutingManagerEngine
void	finished (QGeoRouteReply *reply)
	This signal is emitted when reply has finished processing.

void	errorOccurred (QGeoRouteReply *reply, QGeoRouteReply::Error error, const QString &errorString=QString())
	This signal is emitted when an error has been detected in the processing of reply.

Signals inherited from QObject
void	destroyed (QObject *=nullptr)
	This signal is emitted immediately before the object obj is destroyed, after any instances of QPointer have been notified, and cannot be blocked.

void	objectNameChanged (const QString &objectName, QPrivateSignal)
	This signal is emitted after the object's name has been changed.

Static Public Member Functions inherited from QObject
static QMetaObject::Connection	connect (const QObject sender, const char signal, const QObject receiver, const char member, Qt::ConnectionType=Qt::AutoConnection)
	\threadsafe

static QMetaObject::Connection	connect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &method, Qt::ConnectionType type=Qt::AutoConnection)

template<typename Func1 , typename Func2 >
static QMetaObject::Connection	connect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const typename QtPrivate::ContextTypeForFunctor< Func2 >::ContextType context, Func2 &&slot, Qt::ConnectionType type=Qt::AutoConnection)

template<typename Func1 , typename Func2 >
static QMetaObject::Connection	connect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, Func2 &&slot)

static bool	disconnect (const QObject sender, const char signal, const QObject receiver, const char member)
	\threadsafe

static bool	disconnect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &member)

static bool	disconnect (const QMetaObject::Connection &)
	Disconnect a connection.

template<typename Func1 , typename Func2 >
static bool	disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const typename QtPrivate::FunctionPointer< Func2 >::Object receiver, Func2 slot)

template<typename Func1 >
static bool	disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const QObject receiver, void **zero)

Protected Member Functions inherited from QGeoRoutingManagerEngine
void	setSupportedTravelModes (QGeoRouteRequest::TravelModes travelModes)
	Sets the travel modes supported by this engine to travelModes.

void	setSupportedFeatureTypes (QGeoRouteRequest::FeatureTypes featureTypes)
	Sets the types of features that this engine can take into account during route planning to featureTypes.

void	setSupportedFeatureWeights (QGeoRouteRequest::FeatureWeights featureWeights)
	Sets the weightings which this engine can apply to different features during route planning to featureWeights.

void	setSupportedRouteOptimizations (QGeoRouteRequest::RouteOptimizations optimizations)
	Sets the route optimizations supported by this engine to optimizations.

void	setSupportedSegmentDetails (QGeoRouteRequest::SegmentDetails segmentDetails)
	Sets the levels of detail for routing segments which can be requested by this engine to segmentDetails.

void	setSupportedManeuverDetails (QGeoRouteRequest::ManeuverDetails maneuverDetails)
	Sets the levels of detail for navigation maneuvers which can be requested by this engine to maneuverDetails.

Protected Member Functions inherited from QObject
QObject *	sender () const
	Returns a pointer to the object that sent the signal, if called in a slot activated by a signal; otherwise it returns \nullptr.

int	senderSignalIndex () const

int	receivers (const char *signal) const
	Returns the number of receivers connected to the signal.

bool	isSignalConnected (const QMetaMethod &signal) const

virtual void	timerEvent (QTimerEvent *event)
	This event handler can be reimplemented in a subclass to receive timer events for the object.

virtual void	childEvent (QChildEvent *event)
	This event handler can be reimplemented in a subclass to receive child events.

virtual void	customEvent (QEvent *event)
	This event handler can be reimplemented in a subclass to receive custom events.

virtual void	connectNotify (const QMetaMethod &signal)

virtual void	disconnectNotify (const QMetaMethod &signal)

	QObject (QObjectPrivate &dd, QObject *parent=nullptr)

Protected Attributes inherited from QObject
QScopedPointer< QObjectData >	d_ptr

Properties inherited from QObject
QString	objectName
	the name of this object

Related Symbols inherited from QObject
template< class T > T	qobject_cast (const QObject *object)
	Returns the given object cast to type T if the object is of type T (or of a subclass); otherwise returns \nullptr.

template< typename T > T	qFindChildqFindChildren (const QObject *obj, const QString &name)()

template< typename T > QList< T >	qFindChildrenqFindChildren (const QObject *obj, const QString &name)()

	QObjectList
	\macro Q_CLASSINFO(Name, Value)

Detailed Description

Definition at line 15 of file qgeoroutingmanagerengineosm.h.

Constructor & Destructor Documentation

◆ QGeoRoutingManagerEngineOsm()

QGeoRoutingManagerEngineOsm::QGeoRoutingManagerEngineOsm	(	const QVariantMap &	parameters,
		QGeoServiceProvider::Error *	error,
		QString *	errorString )

Definition at line 13 of file qgeoroutingmanagerengineosm.cpp.

References QMap< Key, T >::contains(), error, QGeoRouteParser::LeftHandTraffic, QGeoServiceProvider::NoError, QByteArray(), QStringLiteral, QGeoRouteParser::RightHandTraffic, QGeoRouteParser::setTrafficSide(), QString::toLatin1(), QVariant::toString(), toString(), and QMap< Key, T >::value().

Here is the call graph for this function:

◆ ~QGeoRoutingManagerEngineOsm()

QGeoRoutingManagerEngineOsm::~QGeoRoutingManagerEngineOsm ( )

Definition at line 46 of file qgeoroutingmanagerengineosm.cpp.

Member Function Documentation

◆ calculateRoute()

QGeoRouteReply * QGeoRoutingManagerEngineOsm::calculateRoute ( const QGeoRouteRequest & request )

overridevirtual

Begins the calculation of the route specified by \a request.

A QGeoRouteReply object will be returned, which can be used to manage the
routing operation and to return the results of the operation.

This engine and the returned QGeoRouteReply object will emit signals
indicating if the operation completes or if errors occur.

Once the operation has completed, QGeoRouteReply::routes can be used to
retrieve the calculated route or routes.

If \a request includes features which are not supported by this engine, as
reported by the methods in this engine, then a
QGeoRouteReply::UnsupportedOptionError will occur.

The user is responsible for deleting the returned reply object, although
this can be done in the slot connected to QGeoRoutingManagerEngine::finished(),
QGeoRoutingManagerEngine::errorOccurred(), QGeoRouteReply::finished() or
QGeoRouteReply::errorOccurred() with deleteLater().

Implements QGeoRoutingManagerEngine.

Definition at line 50 of file qgeoroutingmanagerengineosm.cpp.

References QObject::connect(), QGeoRouteReply::errorOccurred(), QGeoRouteReply::finished(), QNetworkAccessManager::get(), reply, request, routeParser(), QNetworkRequest::setHeader(), and QNetworkRequest::UserAgentHeader.

Here is the call graph for this function: