#include <qquickboundaryrule_p.h>

Inheritance diagram for QQuickBoundaryRule:

Collaboration diagram for QQuickBoundaryRule:

Public Types
enum	OvershootFilter { None , Peak }

Signals
void	enabledChanged ()

void	minimumChanged ()

void	minimumOvershootChanged ()

void	maximumChanged ()

void	maximumOvershootChanged ()

void	overshootScaleChanged ()

void	currentOvershootChanged ()

void	peakOvershootChanged ()

void	overshootFilterChanged ()

void	easingChanged ()

void	returnDurationChanged ()

void	returnedToBounds ()

Signals inherited from QObject
void	destroyed (QObject *=nullptr)
	This signal is emitted immediately before the object obj is destroyed, after any instances of QPointer have been notified, and cannot be blocked.

void	objectNameChanged (const QString &objectName, QPrivateSignal)
	This signal is emitted after the object's name has been changed.

Public Member Functions
	QQuickBoundaryRule (QObject *parent=nullptr)
	Defines a restriction on the range of values that can be set on a numeric property.

	~QQuickBoundaryRule ()

void	setTarget (const QQmlProperty &) override
	Set the target property for the value interceptor.

void	write (const QVariant &value) override
	This method will be called when a new value is assigned to the property being intercepted.

bool	enabled () const
	\qmlproperty bool Qt.labs.animation::BoundaryRule::enabled

void	setEnabled (bool enabled)

qreal	minimum () const
	\qmlproperty qreal Qt.labs.animation::BoundaryRule::minimum

void	setMinimum (qreal minimum)

qreal	minimumOvershoot () const
	\qmlproperty qreal Qt.labs.animation::BoundaryRule::minimumOvershoot

void	setMinimumOvershoot (qreal minimum)

qreal	maximum () const
	\qmlproperty qreal Qt.labs.animation::BoundaryRule::maximum

void	setMaximum (qreal maximum)

qreal	maximumOvershoot () const
	\qmlproperty qreal Qt.labs.animation::BoundaryRule::maximumOvershoot

void	setMaximumOvershoot (qreal maximum)

qreal	overshootScale () const
	\qmlproperty qreal Qt.labs.animation::BoundaryRule::overshootScale

void	setOvershootScale (qreal scale)

qreal	currentOvershoot () const
	\qmlproperty qreal Qt.labs.animation::BoundaryRule::currentOvershoot

qreal	peakOvershoot () const
	\qmlproperty qreal Qt.labs.animation::BoundaryRule::peakOvershoot

OvershootFilter	overshootFilter () const
	\qmlproperty enumeration Qt.labs.animation::BoundaryRule::overshootFilter

void	setOvershootFilter (OvershootFilter overshootFilter)

Q_INVOKABLE bool	returnToBounds ()
	\qmlmethod bool Qt.labs.animation::BoundaryRule::returnToBounds

QEasingCurve	easing () const
	\qmlsignal Qt.labs.animation::BoundaryRule::returnedToBounds()

void	setEasing (const QEasingCurve &easing)

int	returnDuration () const
	\qmlproperty int Qt.labs.animation::BoundaryRule::returnDuration

void	setReturnDuration (int duration)

void	classBegin () override
	Invoked after class creation, but before any properties have been set.

void	componentComplete () override
	Invoked after the root component that caused this instantiation has completed construction.

Public Member Functions inherited from QObject
Q_INVOKABLE	QObject (QObject *parent=nullptr)
	Constructs an object with parent object parent.

virtual	~QObject ()
	Destroys the object, deleting all its child objects.

virtual bool	event (QEvent *event)
	This virtual function receives events to an object and should return true if the event e was recognized and processed.

virtual bool	eventFilter (QObject watched, QEvent event)
	Filters events if this object has been installed as an event filter for the watched object.

QString	objectName () const

Q_WEAK_OVERLOAD void	setObjectName (const QString &name)
	Sets the object's name to name.

void	setObjectName (QAnyStringView name)
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

QBindable< QString >	bindableObjectName ()

bool	isWidgetType () const
	Returns `true` if the object is a widget; otherwise returns `false`.

bool	isWindowType () const
	Returns `true` if the object is a window; otherwise returns `false`.

bool	isQuickItemType () const
	Returns `true` if the object is a QQuickItem; otherwise returns `false`.

bool	signalsBlocked () const noexcept
	Returns `true` if signals are blocked; otherwise returns `false`.

bool	blockSignals (bool b) noexcept
	If block is true, signals emitted by this object are blocked (i.e., emitting a signal will not invoke anything connected to it).

QThread *	thread () const
	Returns the thread in which the object lives.

bool	moveToThread (QThread *thread QT6_DECL_NEW_OVERLOAD_TAIL)
	Changes the thread affinity for this object and its children and returns `true` on success.

int	startTimer (int interval, Qt::TimerType timerType=Qt::CoarseTimer)
	This is an overloaded function that will start a timer of type timerType and a timeout of interval milliseconds.

int	startTimer (std::chrono::nanoseconds time, Qt::TimerType timerType=Qt::CoarseTimer)

void	killTimer (int id)
	Kills the timer with timer identifier, id.

void	killTimer (Qt::TimerId id)

template<typename T >
T	findChild (QAnyStringView aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	Returns the child of this object that can be cast into type T and that is called name, or \nullptr if there is no such object.

template<typename T >
QList< T >	findChildren (QAnyStringView aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects.

template<typename T >
T	findChild (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

template<typename T >
QList< T >	findChildren (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

const QObjectList &	children () const
	Returns a list of child objects.

void	setParent (QObject *parent)
	Makes the object a child of parent.

void	installEventFilter (QObject *filterObj)
	Installs an event filter filterObj on this object.

void	removeEventFilter (QObject *obj)
	Removes an event filter object obj from this object.

QMetaObject::Connection	connect (const QObject sender, const char signal, const char *member, Qt::ConnectionType type=Qt::AutoConnection) const

bool	disconnect (const char signal=nullptr, const QObject receiver=nullptr, const char *member=nullptr) const

bool	disconnect (const QObject receiver, const char member=nullptr) const

void	dumpObjectTree () const
	Dumps a tree of children to the debug output.

void	dumpObjectInfo () const
	Dumps information about signal connections, etc.

bool	setProperty (const char *name, const QVariant &value)
	Sets the value of the object's name property to value.

bool	setProperty (const char *name, QVariant &&value)

QVariant	property (const char *name) const
	Returns the value of the object's name property.

QList< QByteArray >	dynamicPropertyNames () const

QBindingStorage *	bindingStorage ()

const QBindingStorage *	bindingStorage () const

QObject *	parent () const
	Returns a pointer to the parent object.

bool	inherits (const char *classname) const
	Returns `true` if this object is an instance of a class that inherits className or a QObject subclass that inherits className; otherwise returns `false`.

Public Member Functions inherited from QQmlPropertyValueInterceptor
	QQmlPropertyValueInterceptor ()
	Constructs a QQmlPropertyValueInterceptor.

virtual	~QQmlPropertyValueInterceptor ()

virtual bool	bindable (QUntypedBindable *bindable, QUntypedBindable target)

Public Member Functions inherited from QQmlParserStatus
	QQmlParserStatus ()

virtual	~QQmlParserStatus ()

Properties
bool	enabled

qreal	minimum

qreal	minimumOvershoot

qreal	maximum

qreal	maximumOvershoot

qreal	overshootScale

qreal	currentOvershoot

qreal	peakOvershoot

OvershootFilter	overshootFilter

QEasingCurve	easing

int	returnDuration

Properties inherited from QObject
QString	objectName
	the name of this object

Additional Inherited Members
Public Slots inherited from QObject
void	deleteLater ()
	\threadsafe

Static Public Member Functions inherited from QObject
static QMetaObject::Connection	connect (const QObject sender, const char signal, const QObject receiver, const char member, Qt::ConnectionType=Qt::AutoConnection)
	\threadsafe

static QMetaObject::Connection	connect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &method, Qt::ConnectionType type=Qt::AutoConnection)

template<typename Func1 , typename Func2 >
static QMetaObject::Connection	connect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const typename QtPrivate::ContextTypeForFunctor< Func2 >::ContextType context, Func2 &&slot, Qt::ConnectionType type=Qt::AutoConnection)

template<typename Func1 , typename Func2 >
static QMetaObject::Connection	connect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, Func2 &&slot)

static bool	disconnect (const QObject sender, const char signal, const QObject receiver, const char member)
	\threadsafe

static bool	disconnect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &member)

static bool	disconnect (const QMetaObject::Connection &)
	Disconnect a connection.

template<typename Func1 , typename Func2 >
static bool	disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const typename QtPrivate::FunctionPointer< Func2 >::Object receiver, Func2 slot)

template<typename Func1 >
static bool	disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const QObject receiver, void **zero)

Protected Member Functions inherited from QObject
QObject *	sender () const
	Returns a pointer to the object that sent the signal, if called in a slot activated by a signal; otherwise it returns \nullptr.

int	senderSignalIndex () const

int	receivers (const char *signal) const
	Returns the number of receivers connected to the signal.

bool	isSignalConnected (const QMetaMethod &signal) const

virtual void	timerEvent (QTimerEvent *event)
	This event handler can be reimplemented in a subclass to receive timer events for the object.

virtual void	childEvent (QChildEvent *event)
	This event handler can be reimplemented in a subclass to receive child events.

virtual void	customEvent (QEvent *event)
	This event handler can be reimplemented in a subclass to receive custom events.

virtual void	connectNotify (const QMetaMethod &signal)

virtual void	disconnectNotify (const QMetaMethod &signal)

	QObject (QObjectPrivate &dd, QObject *parent=nullptr)

Protected Attributes inherited from QObject
QScopedPointer< QObjectData >	d_ptr

Related Symbols inherited from QObject
template< class T > T	qobject_cast (const QObject *object)
	Returns the given object cast to type T if the object is of type T (or of a subclass); otherwise returns \nullptr.

template< typename T > T	qFindChildqFindChildren (const QObject *obj, const QString &name)()

template< typename T > QList< T >	qFindChildrenqFindChildren (const QObject *obj, const QString &name)()

	QObjectList
	\macro Q_CLASSINFO(Name, Value)

Detailed Description

Definition at line 29 of file qquickboundaryrule_p.h.

Member Enumeration Documentation

◆ OvershootFilter

enum QQuickBoundaryRule::OvershootFilter

Enumerator
None
Peak

Definition at line 51 of file qquickboundaryrule_p.h.

Constructor & Destructor Documentation

◆ QQuickBoundaryRule()

QQuickBoundaryRule::QQuickBoundaryRule ( QObject * parent = nullptr )

Defines a restriction on the range of values that can be set on a numeric property.

\qmltype BoundaryRule

! \instantiates QQuickBoundaryRule \inqmlmodule Qt.labs.animation

Since: 5.14

A BoundaryRule defines the range of values that a particular property is allowed to have. When an out-of-range value would otherwise be set, it applies "resistance" via an easing curve.

For example, the following BoundaryRule prevents DragHandler from dragging the Rectangle too far:

import QtQuick
import Qt.labs.animation
 
Rectangle {
    id: root
    width: 170; height: 120
    color: "green"
 
    DragHandler {
        id: dragHandler
        yAxis.minimum: -1000
        xAxis.minimum: -1000
        onActiveChanged: if (!active) xbr.returnToBounds();
    }
 
    BoundaryRule on x {
        id: xbr
        minimum: -50
        maximum: 100
        minimumOvershoot: 40
        maximumOvershoot: 40
    }
}

Note that a property cannot have more than one assigned BoundaryRule.

See also: {Animation and Transitions in Qt Quick}, {Qt Quick Examples - Animation::Behaviors}{Behavior example}, {Qt Qml}, {Qt Quick Examples - Pointer Handlers}

Definition at line 117 of file qquickboundaryrule.cpp.

◆ ~QQuickBoundaryRule()

QQuickBoundaryRule::~QQuickBoundaryRule ( )

Definition at line 123 of file qquickboundaryrule.cpp.

References d.

Member Function Documentation

◆ classBegin()

void QQuickBoundaryRule::classBegin ( )

overridevirtual

Invoked after class creation, but before any properties have been set.

Implements QQmlParserStatus.

Definition at line 450 of file qquickboundaryrule.cpp.

◆ componentComplete()

void QQuickBoundaryRule::componentComplete ( )

overridevirtual

Invoked after the root component that caused this instantiation has completed construction.

At this point all static values and binding values have been assigned to the class.

Implements QQmlParserStatus.

Definition at line 455 of file qquickboundaryrule.cpp.

References d.

◆ currentOvershoot()

qreal QQuickBoundaryRule::currentOvershoot ( ) const

\qmlproperty qreal Qt.labs.animation::BoundaryRule::currentOvershoot

This property holds the amount by which the most recently set value of the intercepted property exceeds \l maximum or is less than \l minimum.

It is positive if the property value exceeds \l maximum, negative if the property value is less than \l minimum, or 0 if the property value is within both boundaries.

Definition at line 296 of file qquickboundaryrule.cpp.

References d.

◆ currentOvershootChanged

void QQuickBoundaryRule::currentOvershootChanged ( )

signal

◆ easing()

QEasingCurve QQuickBoundaryRule::easing ( ) const

\qmlsignal Qt.labs.animation::BoundaryRule::returnedToBounds()

This signal is emitted when \l currentOvershoot returns to 0 again, after the \l maximum or \l minimum constraint has been violated. If the return is animated, the signal is emitted when the animation completes.

See also: returnDuration, returnToBounds()

\qmlproperty enumeration Qt.labs.animation::BoundaryRule::easing

This property holds the easing curve to be applied in overshoot mode (whenever the \l minimum or \l maximum constraint is violated, while the value is still within the respective overshoot range).

The default easing curve is \l QEasingCurve::OutQuad.

Definition at line 410 of file qquickboundaryrule.cpp.

References d.

◆ easingChanged

void QQuickBoundaryRule::easingChanged ( )

signal

Referenced by setEasing().

Here is the caller graph for this function:

◆ enabled()

bool QQuickBoundaryRule::enabled ( ) const

\qmlproperty bool Qt.labs.animation::BoundaryRule::enabled

This property holds whether the rule will be enforced when the tracked property changes value.

By default a BoundaryRule is enabled.

Definition at line 139 of file qquickboundaryrule.cpp.

References d.

◆ enabledChanged

void QQuickBoundaryRule::enabledChanged ( )

signal

Referenced by setEnabled().

Here is the caller graph for this function:

◆ maximum()

qreal QQuickBoundaryRule::maximum ( ) const

\qmlproperty qreal Qt.labs.animation::BoundaryRule::maximum

This property holds the largest unconstrained value that the property is allowed to have. If the property is set to a larger value, it will be constrained by \l easing and \l maximumOvershoot.

The default is 1.

Definition at line 213 of file qquickboundaryrule.cpp.

References d.

◆ maximumChanged

void QQuickBoundaryRule::maximumChanged ( )

signal

Referenced by setMaximum().

Here is the caller graph for this function:

◆ maximumOvershoot()

qreal QQuickBoundaryRule::maximumOvershoot ( ) const

\qmlproperty qreal Qt.labs.animation::BoundaryRule::maximumOvershoot

This property holds the amount that the property is allowed to be more than \l maximum. Whenever the value is greater than \l maximum and less than {maximum + maximumOvershoot}, it is constrained by the \l easing curve. When the value attempts to exceed {maximum + maximumOvershoot} there is a hard stop.

The default is 0.

Definition at line 239 of file qquickboundaryrule.cpp.

References d.

◆ maximumOvershootChanged

void QQuickBoundaryRule::maximumOvershootChanged ( )

signal

Referenced by setMaximumOvershoot().

Here is the caller graph for this function:

◆ minimum()

qreal QQuickBoundaryRule::minimum ( ) const

\qmlproperty qreal Qt.labs.animation::BoundaryRule::minimum

This property holds the smallest unconstrained value that the property is allowed to have. If the property is set to a smaller value, it will be constrained by \l easing and \l minimumOvershoot.

The default is 0.

Definition at line 163 of file qquickboundaryrule.cpp.

References d.

◆ minimumChanged

void QQuickBoundaryRule::minimumChanged ( )

signal

Referenced by setMinimum().

Here is the caller graph for this function:

◆ minimumOvershoot()

qreal QQuickBoundaryRule::minimumOvershoot ( ) const

\qmlproperty qreal Qt.labs.animation::BoundaryRule::minimumOvershoot

This property holds the amount that the property is allowed to be less than \l minimum. Whenever the value is less than \l minimum and greater than {minimum - minimumOvershoot}, it is constrained by the \l easing curve. When the value attempts to go under {minimum - minimumOvershoots} there is a hard stop.

The default is 0.

Definition at line 189 of file qquickboundaryrule.cpp.

References d.

◆ minimumOvershootChanged

void QQuickBoundaryRule::minimumOvershootChanged ( )

signal

Referenced by setMinimumOvershoot().

Here is the caller graph for this function:

◆ overshootFilter()

QQuickBoundaryRule::OvershootFilter QQuickBoundaryRule::overshootFilter ( ) const

\qmlproperty enumeration Qt.labs.animation::BoundaryRule::overshootFilter

This property specifies the aggregation function that will be applied to the intercepted property value.

If this is set to BoundaryRule.None (the default), the intercepted property will hold a value whose overshoot is limited to \l currentOvershoot. If this is set to BoundaryRule.Peak, the intercepted property will hold a value whose overshoot is limited to \l peakOvershoot.

Definition at line 331 of file qquickboundaryrule.cpp.

References d.

◆ overshootFilterChanged

void QQuickBoundaryRule::overshootFilterChanged ( )

signal

Referenced by setOvershootFilter().

Here is the caller graph for this function:

◆ overshootScale()

qreal QQuickBoundaryRule::overshootScale ( ) const

\qmlproperty qreal Qt.labs.animation::BoundaryRule::overshootScale

This property holds the amount by which the \l easing is scaled during the overshoot condition. For example if an Item is restricted from moving more than 100 pixels beyond some limit, and the user (by means of some Input Handler) is trying to drag it 100 pixels past the limit, if overshootScale is set to 1, the user will succeed: the only effect of the easing curve is to change the rate at which the item moves from overshoot 0 to overshoot

But if it is set to 0.5, the BoundaryRule provides resistance such that when the user tries to move 100 pixels, the Item will only move 50 pixels; and the easing curve modulates the rate of movement such that it may move in sync with the user's attempted movement at the beginning, and then slows down, depending on the shape of the easing curve.

The default is 0.5.

Definition at line 271 of file qquickboundaryrule.cpp.

References d.

◆ overshootScaleChanged

void QQuickBoundaryRule::overshootScaleChanged ( )

signal

Referenced by setOvershootScale().

Here is the caller graph for this function:

◆ peakOvershoot()

qreal QQuickBoundaryRule::peakOvershoot ( ) const

\qmlproperty qreal Qt.labs.animation::BoundaryRule::peakOvershoot

This property holds the most-positive or most-negative value of \l currentOvershoot that has been seen, until \l returnToBounds() is called.

This can be useful when the intercepted property value is known to fluctuate, and you want to find and react to the maximum amount of overshoot rather than to the fluctuations.

See also: overshootFilter

Definition at line 314 of file qquickboundaryrule.cpp.

References d.

◆ peakOvershootChanged

void QQuickBoundaryRule::peakOvershootChanged ( )

signal

◆ returnDuration()

int QQuickBoundaryRule::returnDuration ( ) const

\qmlproperty int Qt.labs.animation::BoundaryRule::returnDuration

This property holds the amount of time in milliseconds that \l returnToBounds() will take to return the target property to the nearest bound. If it is set to 0, returnToBounds() will set the property immediately rather than creating an animation job.

The default is 100 ms.

Definition at line 435 of file qquickboundaryrule.cpp.

References d.

◆ returnDurationChanged

void QQuickBoundaryRule::returnDurationChanged ( )

signal

Referenced by setReturnDuration().

Here is the caller graph for this function:

◆ returnedToBounds

void QQuickBoundaryRule::returnedToBounds ( )

signal

Referenced by returnToBounds().

Here is the caller graph for this function:

◆ returnToBounds()

bool QQuickBoundaryRule::returnToBounds ( )

\qmlmethod bool Qt.labs.animation::BoundaryRule::returnToBounds

Returns the intercepted property to a value between \l minimum and \l maximum, such that \l currentOvershoot and \l peakOvershoot are both zero. This will be animated if \l returnDuration is greater than zero.

Returns true if the value needed to be adjusted, or false if it was already within bounds.

See also: returnedToBounds

Definition at line 358 of file qquickboundaryrule.cpp.

References currentOvershoot, d, emit, maximum, minimum, qCDebug, returnedToBounds(), and write().

Here is the call graph for this function:

◆ setEasing()

void QQuickBoundaryRule::setEasing ( const QEasingCurve & easing )

Definition at line 416 of file qquickboundaryrule.cpp.

References d, easing, easingChanged(), and emit.

Here is the call graph for this function:

◆ setEnabled()

void QQuickBoundaryRule::setEnabled ( bool enabled )

Definition at line 145 of file qquickboundaryrule.cpp.

References d, emit, enabled, and enabledChanged().

Here is the call graph for this function:

◆ setMaximum()

void QQuickBoundaryRule::setMaximum ( qreal maximum )

Definition at line 219 of file qquickboundaryrule.cpp.

References d, emit, maximum, maximumChanged(), and qFuzzyCompare().

Here is the call graph for this function:

◆ setMaximumOvershoot()

void QQuickBoundaryRule::setMaximumOvershoot ( qreal maximum )

Definition at line 245 of file qquickboundaryrule.cpp.

References d, emit, maximumOvershoot, maximumOvershootChanged(), and qFuzzyCompare().

Here is the call graph for this function:

◆ setMinimum()

void QQuickBoundaryRule::setMinimum ( qreal minimum )

Definition at line 169 of file qquickboundaryrule.cpp.

References d, emit, minimum, minimumChanged(), and qFuzzyCompare().

Here is the call graph for this function:

◆ setMinimumOvershoot()

void QQuickBoundaryRule::setMinimumOvershoot ( qreal minimum )

Definition at line 195 of file qquickboundaryrule.cpp.

References d, emit, minimumOvershoot, minimumOvershootChanged(), and qFuzzyCompare().

Here is the call graph for this function:

◆ setOvershootFilter()

void QQuickBoundaryRule::setOvershootFilter ( OvershootFilter overshootFilter )

Definition at line 337 of file qquickboundaryrule.cpp.

References d, emit, overshootFilter, and overshootFilterChanged().

Here is the call graph for this function:

◆ setOvershootScale()

void QQuickBoundaryRule::setOvershootScale ( qreal scale )

Definition at line 277 of file qquickboundaryrule.cpp.

References d, emit, overshootScale, overshootScaleChanged(), and qFuzzyCompare().

Here is the call graph for this function:

◆ setReturnDuration()

void QQuickBoundaryRule::setReturnDuration ( int duration )

Definition at line 441 of file qquickboundaryrule.cpp.

References d, emit, and returnDurationChanged().

Here is the call graph for this function:

◆ setTarget()

void QQuickBoundaryRule::setTarget ( const QQmlProperty & property )

overridevirtual

Set the target property for the value interceptor.

This method will be called by the QML engine when assigning a value interceptor.

Implements QQmlPropertyValueInterceptor.

Definition at line 482 of file qquickboundaryrule.cpp.

References d, and property.

◆ write()

void QQuickBoundaryRule::write ( const QVariant & value )

overridevirtual

This method will be called when a new value is assigned to the property being intercepted.

Implements QQmlPropertyValueInterceptor.

Definition at line 461 of file qquickboundaryrule.cpp.

References QQmlPropertyData::BypassInterceptor, d, QQmlEnginePrivate::designerMode(), QQmlPropertyData::DontRemoveBinding, qWarning, and QQmlPropertyPrivate::write().

Referenced by returnToBounds().

Here is the call graph for this function:

Here is the caller graph for this function:

Property Documentation

◆ currentOvershoot

qreal QQuickBoundaryRule::currentOvershoot

read

Definition at line 42 of file qquickboundaryrule_p.h.

Referenced by returnToBounds().

◆ easing

QEasingCurve QQuickBoundaryRule::easing

readwrite

Definition at line 45 of file qquickboundaryrule_p.h.

Referenced by setEasing().

◆ enabled

bool QQuickBoundaryRule::enabled

readwrite

Definition at line 36 of file qquickboundaryrule_p.h.

Referenced by setEnabled().

◆ maximum

qreal QQuickBoundaryRule::maximum

readwrite

Definition at line 39 of file qquickboundaryrule_p.h.

Referenced by returnToBounds(), and setMaximum().

◆ maximumOvershoot

qreal QQuickBoundaryRule::maximumOvershoot

readwrite

Definition at line 40 of file qquickboundaryrule_p.h.

Referenced by setMaximumOvershoot().

◆ minimum

qreal QQuickBoundaryRule::minimum

readwrite

Definition at line 37 of file qquickboundaryrule_p.h.

Referenced by returnToBounds(), and setMinimum().

◆ minimumOvershoot

qreal QQuickBoundaryRule::minimumOvershoot

readwrite

Definition at line 38 of file qquickboundaryrule_p.h.

Referenced by setMinimumOvershoot().

◆ overshootFilter

OvershootFilter QQuickBoundaryRule::overshootFilter

readwrite

Definition at line 44 of file qquickboundaryrule_p.h.

Referenced by setOvershootFilter().

◆ overshootScale

qreal QQuickBoundaryRule::overshootScale

readwrite

Definition at line 41 of file qquickboundaryrule_p.h.

Referenced by setOvershootScale().

◆ peakOvershoot

qreal QQuickBoundaryRule::peakOvershoot

read

Definition at line 43 of file qquickboundaryrule_p.h.

◆ returnDuration

int QQuickBoundaryRule::returnDuration

readwrite

Definition at line 46 of file qquickboundaryrule_p.h.

The documentation for this class was generated from the following files:

qtdeclarative/src/labs/animation/qquickboundaryrule_p.h (e5ea027c61b17e5e4cc7e166f0f83d715ce3cf7c)
qtdeclarative/src/labs/animation/qquickboundaryrule.cpp (72c825e685229a2b747f1d79216ef3c6d3304de8)

Public Types

Signals

Public Member Functions

Properties

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

◆ OvershootFilter

Constructor & Destructor Documentation

◆ QQuickBoundaryRule()

◆ ~QQuickBoundaryRule()

Member Function Documentation

◆ classBegin()

◆ componentComplete()

◆ currentOvershoot()

◆ currentOvershootChanged

◆ easing()

◆ easingChanged

◆ enabled()

◆ enabledChanged

◆ maximum()

◆ maximumChanged

◆ maximumOvershoot()

◆ maximumOvershootChanged

◆ minimum()

◆ minimumChanged

◆ minimumOvershoot()

◆ minimumOvershootChanged

◆ overshootFilter()

◆ overshootFilterChanged

◆ overshootScale()

◆ overshootScaleChanged

◆ peakOvershoot()

◆ peakOvershootChanged

◆ returnDuration()

◆ returnDurationChanged

◆ returnedToBounds

◆ returnToBounds()

◆ setEasing()

◆ setEnabled()

◆ setMaximum()

◆ setMaximumOvershoot()

◆ setMinimum()

◆ setMinimumOvershoot()

◆ setOvershootFilter()

◆ setOvershootScale()

◆ setReturnDuration()

◆ setTarget()

◆ write()

Property Documentation

◆ currentOvershoot

◆ easing

◆ enabled

◆ maximum

◆ maximumOvershoot

◆ minimum

◆ minimumOvershoot

◆ overshootFilter

◆ overshootScale

◆ peakOvershoot

◆ returnDuration