#include <qquickdialogbuttonbox_p.h>

Inheritance diagram for QQuickDialogButtonBox:

Collaboration diagram for QQuickDialogButtonBox:

Public Types
enum	Position { Header , Footer }

Public Types inherited from QQuickItem
enum	Flag { ItemClipsChildrenToShape = 0x01 , ItemIsFocusScope = 0x04 , ItemHasContents = 0x08 , ItemAcceptsDrops = 0x10 , ItemIsViewport = 0x20 , ItemObservesViewport = 0x40 }
	\qmltype Item \instantiates QQuickItem \inherits QtObject \inqmlmodule QtQuick More...

enum	ItemChange { ItemChildAddedChange , ItemChildRemovedChange , ItemSceneChange , ItemVisibleHasChanged , ItemParentHasChanged , ItemOpacityHasChanged , ItemActiveFocusHasChanged , ItemRotationHasChanged , ItemAntialiasingHasChanged , ItemDevicePixelRatioHasChanged , ItemEnabledHasChanged }
	Used in conjunction with QQuickItem::itemChange() to notify the item about certain types of changes. More...

enum	TransformOrigin { TopLeft , Top , TopRight , Left , Center , Right , BottomLeft , Bottom , BottomRight }
	\variable QQuickItem::ItemChangeData::realValue The numeric value that has changed: \l {QQuickItem::opacity()}{opacity}, \l {QQuickItem::rotation()}{rotation}, or \l {QScreen::devicePixelRatio}{device pixel ratio}. More...

Signals
void	accepted ()

void	rejected ()

void	helpRequested ()

void	clicked (QQuickAbstractButton *button)

void	positionChanged ()

void	alignmentChanged ()

void	standardButtonsChanged ()

void	delegateChanged ()

	Q_REVISION (2, 3) void applied()

	Q_REVISION (2, 3) void reset()

	Q_REVISION (2, 3) void discarded()

	Q_REVISION (2, 5) void buttonLayoutChanged()

Signals inherited from QQuickContainer
void	countChanged ()

void	contentChildrenChanged ()

void	currentIndexChanged ()

void	currentItemChanged ()

	Q_REVISION (2, 5) void contentWidthChanged()

	Q_REVISION (2, 5) void contentHeightChanged()

Signals inherited from QQuickControl
void	fontChanged ()

void	availableWidthChanged ()

void	availableHeightChanged ()

void	paddingChanged ()

void	topPaddingChanged ()

void	leftPaddingChanged ()

void	rightPaddingChanged ()

void	bottomPaddingChanged ()

void	spacingChanged ()

void	localeChanged ()

void	focusReasonChanged ()

void	mirroredChanged ()

void	visualFocusChanged ()

void	hoveredChanged ()

void	hoverEnabledChanged ()

void	wheelEnabledChanged ()

void	backgroundChanged ()

void	contentItemChanged ()

void	baselineOffsetChanged ()

	Q_REVISION (2, 5) void horizontalPaddingChanged()

	Q_REVISION (2, 5) void verticalPaddingChanged()

	Q_REVISION (2, 5) void implicitContentWidthChanged()

	Q_REVISION (2, 5) void implicitContentHeightChanged()

	Q_REVISION (2, 5) void implicitBackgroundWidthChanged()

	Q_REVISION (2, 5) void implicitBackgroundHeightChanged()

	Q_REVISION (2, 5) void topInsetChanged()

	Q_REVISION (2, 5) void leftInsetChanged()

	Q_REVISION (2, 5) void rightInsetChanged()

	Q_REVISION (2, 5) void bottomInsetChanged()

Signals inherited from QQuickItem
void	childrenRectChanged (const QRectF &)

void	baselineOffsetChanged (qreal)

void	stateChanged (const QString &)

void	focusChanged (bool)

void	activeFocusChanged (bool)

Q_REVISION(6, 7) void focusPolicyChanged(Qt	Q_REVISION (2, 1) void activeFocusOnTabChanged(bool)

void	parentChanged (QQuickItem *)

void	transformOriginChanged (TransformOrigin)

void	smoothChanged (bool)

void	antialiasingChanged (bool)

void	clipChanged (bool)

	Q_REVISION (2, 1) void windowChanged(QQuickWindow *window)

void	childrenChanged ()

void	opacityChanged ()

void	enabledChanged ()

void	visibleChanged ()

void	visibleChildrenChanged ()

void	rotationChanged ()

void	scaleChanged ()

void	xChanged ()

void	yChanged ()

void	widthChanged ()

void	heightChanged ()

void	zChanged ()

void	implicitWidthChanged ()

void	implicitHeightChanged ()

	Q_REVISION (2, 11) void containmentMaskChanged()

	Q_REVISION (6, 0) void paletteChanged()

	Q_REVISION (6, 0) void paletteCreated()

Signals inherited from QObject
void	destroyed (QObject *=nullptr)
	This signal is emitted immediately before the object obj is destroyed, after any instances of QPointer have been notified, and cannot be blocked.

void	objectNameChanged (const QString &objectName, QPrivateSignal)
	This signal is emitted after the object's name has been changed.

Public Member Functions
	QQuickDialogButtonBox (QQuickItem *parent=nullptr)

	~QQuickDialogButtonBox ()

Position	position () const
	\qmlproperty enumeration QtQuick.Controls::DialogButtonBox::position

void	setPosition (Position position)

Qt::Alignment	alignment () const
	\qmlproperty flags QtQuick.Controls::DialogButtonBox::alignment

void	setAlignment (Qt::Alignment alignment)

void	resetAlignment ()

QPlatformDialogHelper::StandardButtons	standardButtons () const
	\qmlproperty enumeration QtQuick.Controls::DialogButtonBox::standardButtons

void	setStandardButtons (QPlatformDialogHelper::StandardButtons buttons)

Q_INVOKABLE QQuickAbstractButton *	standardButton (QPlatformDialogHelper::StandardButton button) const
	\qmlmethod AbstractButton QtQuick.Controls::DialogButtonBox::standardButton(StandardButton button)

QQmlComponent *	delegate () const
	\qmlproperty Component QtQuick.Controls::DialogButtonBox::delegate

void	setDelegate (QQmlComponent *delegate)

QPlatformDialogHelper::ButtonLayout	buttonLayout () const

void	setButtonLayout (QPlatformDialogHelper::ButtonLayout layout)

void	resetButtonLayout ()

Public Member Functions inherited from QQuickContainer
	QQuickContainer (QQuickItem *parent=nullptr)

	~QQuickContainer ()

int	count () const
	\qmlproperty int QtQuick.Controls::Container::count \readonly

Q_INVOKABLE QQuickItem *	itemAt (int index) const
	\qmlmethod Item QtQuick.Controls::Container::itemAt(int index)

Q_INVOKABLE void	addItem (QQuickItem *item)
	\qmlmethod void QtQuick.Controls::Container::addItem(Item item)

Q_INVOKABLE void	insertItem (int index, QQuickItem *item)
	\qmlmethod void QtQuick.Controls::Container::insertItem(int index, Item item)

Q_INVOKABLE void	moveItem (int from, int to)
	\qmlmethod void QtQuick.Controls::Container::moveItem(int from, int to)

Q_INVOKABLE void	removeItem (QQuickItem *item)

	Q_REVISION (2, 3) Q_INVOKABLE QQuickItem *takeItem(int index)

QVariant	contentModel () const
	\qmlproperty model QtQuick.Controls::Container::contentModel \readonly

QQmlListProperty< QObject >	contentData ()

QQmlListProperty< QQuickItem >	contentChildren ()

int	currentIndex () const
	\qmlproperty int QtQuick.Controls::Container::currentIndex

QQuickItem *	currentItem () const
	\qmlproperty Item QtQuick.Controls::Container::currentItem \readonly

qreal	contentWidth () const

void	setContentWidth (qreal width)

void	resetContentWidth ()

qreal	contentHeight () const

void	setContentHeight (qreal height)

void	resetContentHeight ()

Public Member Functions inherited from QQuickControl
	QQuickControl (QQuickItem *parent=nullptr)

	~QQuickControl ()

QFont	font () const
	\qmlproperty font QtQuick.Controls::Control::font

void	setFont (const QFont &font)

void	resetFont ()

qreal	availableWidth () const
	\qmlproperty real QtQuick.Controls::Control::availableWidth \readonly

qreal	availableHeight () const
	\qmlproperty real QtQuick.Controls::Control::availableHeight \readonly

qreal	padding () const
	\qmlproperty real QtQuick.Controls::Control::padding

void	setPadding (qreal padding)

void	resetPadding ()

qreal	topPadding () const
	\qmlproperty real QtQuick.Controls::Control::topPadding

void	setTopPadding (qreal padding)

void	resetTopPadding ()

qreal	leftPadding () const
	\qmlproperty real QtQuick.Controls::Control::leftPadding

void	setLeftPadding (qreal padding)

void	resetLeftPadding ()

qreal	rightPadding () const
	\qmlproperty real QtQuick.Controls::Control::rightPadding

void	setRightPadding (qreal padding)

void	resetRightPadding ()

qreal	bottomPadding () const
	\qmlproperty real QtQuick.Controls::Control::bottomPadding

void	setBottomPadding (qreal padding)

void	resetBottomPadding ()

qreal	spacing () const
	\qmlproperty real QtQuick.Controls::Control::spacing

void	setSpacing (qreal spacing)

void	resetSpacing ()

QLocale	locale () const
	\qmlproperty Locale QtQuick.Controls::Control::locale

void	setLocale (const QLocale &locale)

void	resetLocale ()

bool	isMirrored () const
	\qmlproperty bool QtQuick.Controls::Control::mirrored \readonly

Qt::FocusReason	focusReason () const
	\qmlproperty enumeration QtQuick.Controls::Control::focusReason \readonly

void	setFocusReason (Qt::FocusReason reason)

bool	hasVisualFocus () const
	\qmlproperty bool QtQuick.Controls::Control::visualFocus \readonly

bool	isHovered () const
	\qmlproperty bool QtQuick.Controls::Control::hovered \readonly

void	setHovered (bool hovered)

bool	isHoverEnabled () const
	\qmlproperty bool QtQuick.Controls::Control::hoverEnabled

void	setHoverEnabled (bool enabled)

void	resetHoverEnabled ()

bool	isWheelEnabled () const
	\qmlproperty bool QtQuick.Controls::Control::wheelEnabled

void	setWheelEnabled (bool enabled)

QQuickItem *	background () const
	\qmlproperty Item QtQuick.Controls::Control::background

void	setBackground (QQuickItem *background)

QQuickItem *	contentItem () const
	\qmlproperty Item QtQuick.Controls::Control::contentItem

void	setContentItem (QQuickItem *item)

qreal	baselineOffset () const

void	setBaselineOffset (qreal offset)

void	resetBaselineOffset ()

qreal	horizontalPadding () const

void	setHorizontalPadding (qreal padding)

void	resetHorizontalPadding ()

qreal	verticalPadding () const

void	setVerticalPadding (qreal padding)

void	resetVerticalPadding ()

qreal	implicitContentWidth () const

qreal	implicitContentHeight () const

qreal	implicitBackgroundWidth () const

qreal	implicitBackgroundHeight () const

qreal	topInset () const

void	setTopInset (qreal inset)

void	resetTopInset ()

qreal	leftInset () const

void	setLeftInset (qreal inset)

void	resetLeftInset ()

qreal	rightInset () const

void	setRightInset (qreal inset)

void	resetRightInset ()

qreal	bottomInset () const

void	setBottomInset (qreal inset)

void	resetBottomInset ()

Public Member Functions inherited from QQuickItem
	QQuickItem (QQuickItem *parent=nullptr)
	Constructs a QQuickItem with the given parent.

	~QQuickItem () override
	Destroys the QQuickItem.

QQuickWindow *	window () const
	Returns the window in which this item is rendered.

QQuickItem *	parentItem () const

void	setParentItem (QQuickItem *parent)

void	stackBefore (const QQuickItem *)
	Moves the specified sibling item to the index before this item within the list of children.

void	stackAfter (const QQuickItem *)
	Moves the specified sibling item to the index after this item within the list of children.

QRectF	childrenRect ()
	\qmlpropertygroup QtQuick::Item::childrenRect \qmlproperty real QtQuick::Item::childrenRect.x \qmlproperty real QtQuick::Item::childrenRect.y \qmlproperty real QtQuick::Item::childrenRect.width \qmlproperty real QtQuick::Item::childrenRect.height \readonly

QList< QQuickItem * >	childItems () const
	Returns the children of this item.

bool	clip () const
	\qmlproperty bool QtQuick::Item::clip This property holds whether clipping is enabled.

void	setClip (bool)

QString	state () const
	\qmlproperty string QtQuick::Item::state

void	setState (const QString &)

qreal	baselineOffset () const
	\qmlproperty int QtQuick::Item::baselineOffset

void	setBaselineOffset (qreal)

QQmlListProperty< QQuickTransform >	transform ()

qreal	x () const

qreal	y () const

QPointF	position () const

void	setX (qreal)

void	setY (qreal)

void	setPosition (const QPointF &)

QBindable< qreal >	bindableX ()

QBindable< qreal >	bindableY ()

qreal	width () const

void	setWidth (qreal)

void	resetWidth ()

void	setImplicitWidth (qreal)

qreal	implicitWidth () const
	Returns the width of the item that is implied by other properties that determine the content.

QBindable< qreal >	bindableWidth ()

qreal	height () const

void	setHeight (qreal)

void	resetHeight ()

void	setImplicitHeight (qreal)

qreal	implicitHeight () const

QBindable< qreal >	bindableHeight ()

QSizeF	size () const

void	setSize (const QSizeF &size)

TransformOrigin	transformOrigin () const

void	setTransformOrigin (TransformOrigin)

QPointF	transformOriginPoint () const

void	setTransformOriginPoint (const QPointF &)

qreal	z () const

void	setZ (qreal)

qreal	rotation () const

void	setRotation (qreal)

qreal	scale () const

void	setScale (qreal)

qreal	opacity () const

void	setOpacity (qreal)

bool	isVisible () const

void	setVisible (bool)

bool	isEnabled () const

void	setEnabled (bool)

bool	smooth () const

void	setSmooth (bool)

bool	activeFocusOnTab () const
	\qmlproperty bool QtQuick::Item::activeFocusOnTab

void	setActiveFocusOnTab (bool)

bool	antialiasing () const

void	setAntialiasing (bool)

void	resetAntialiasing ()

Flags	flags () const
	Returns the item flags for this item.

void	setFlag (Flag flag, bool enabled=true)
	Enables the specified flag for this item if enabled is true; if enabled is false, the flag is disabled.

void	setFlags (Flags flags)
	Enables the specified flags for this item.

virtual QRectF	boundingRect () const
	Returns the extents of the item in its own coordinate system: a rectangle from {0, 0} to \l width() and \l height().

virtual QRectF	clipRect () const
	Returns the rectangular area within this item that is currently visible in \l viewportItem(), if there is a viewport and the \l ItemObservesViewport flag is set; otherwise, the extents of this item in its own coordinate system: a rectangle from {0, 0} to \l width() and \l height().

QQuickItem *	viewportItem () const
	If the \l ItemObservesViewport flag is set, returns the nearest parent with the \l ItemIsViewport flag.

bool	hasActiveFocus () const

bool	hasFocus () const

void	setFocus (bool)

void	setFocus (bool focus, Qt::FocusReason reason)

bool	isFocusScope () const
	Returns true if this item is a focus scope, and false otherwise.

QQuickItem *	scopedFocusItem () const
	If this item is a focus scope, this returns the item in its focus chain that currently has focus.

Qt::FocusPolicy	focusPolicy () const

void	setFocusPolicy (Qt::FocusPolicy policy)
	Sets the focus policy of this item to policy.

bool	isAncestorOf (const QQuickItem *child) const
	Returns `true` if this item is an ancestor of child (i.e., if this item is child's parent, or one of child's parent's ancestors).

Qt::MouseButtons	acceptedMouseButtons () const
	Returns the mouse buttons accepted by this item.

void	setAcceptedMouseButtons (Qt::MouseButtons buttons)
	Sets the mouse buttons accepted by this item to buttons.

bool	acceptHoverEvents () const
	Returns whether hover events are accepted by this item.

void	setAcceptHoverEvents (bool enabled)
	If enabled is true, this sets the item to accept hover events; otherwise, hover events are not accepted by this item.

bool	acceptTouchEvents () const
	Returns whether touch events are accepted by this item.

void	setAcceptTouchEvents (bool accept)
	If enabled is true, this sets the item to accept touch events; otherwise, touch events are not accepted by this item.

bool	isUnderMouse () const

void	grabMouse ()

void	ungrabMouse ()

bool	keepMouseGrab () const
	Returns whether mouse input should exclusively remain with this item.

void	setKeepMouseGrab (bool)
	Sets whether the mouse input should remain exclusively with this item.

bool	filtersChildMouseEvents () const
	Returns whether pointer events intended for this item's children should be filtered through this item.

void	setFiltersChildMouseEvents (bool filter)
	Sets whether pointer events intended for this item's children should be filtered through this item.

void	grabTouchPoints (const QList< int > &ids)

void	ungrabTouchPoints ()

bool	keepTouchGrab () const
	Returns whether the touch points grabbed by this item should exclusively remain with this item.

void	setKeepTouchGrab (bool)
	Sets whether the touch points grabbed by this item should remain exclusively with this item.

	Q_REVISION (2, 4) Q_INVOKABLE bool grabToImage(const QJSValue &callback

QSharedPointer< QQuickItemGrabResult >	grabToImage (const QSize &targetSize=QSize())
	Grabs the item into an in-memory image.

virtual Q_INVOKABLE bool	contains (const QPointF &point) const
	\qmlmethod bool QtQuick::Item::contains(point point)

QObject *	containmentMask () const

void	setContainmentMask (QObject *mask)

QTransform	itemTransform (QQuickItem , bool ) const
	\qmlmethod point QtQuick::Item::mapFromItem(Item item, real x, real y) \qmlmethod point QtQuick::Item::mapFromItem(Item item, point p) \qmlmethod rect QtQuick::Item::mapFromItem(Item item, real x, real y, real width, real height) \qmlmethod rect QtQuick::Item::mapFromItem(Item item, rect r)

QPointF	mapToScene (const QPointF &point) const
	Maps the given point in this item's coordinate system to the equivalent point within the scene's coordinate system, and returns the mapped coordinate.

QRectF	mapRectToItem (const QQuickItem *item, const QRectF &rect) const
	Maps the given rect in this item's coordinate system to the equivalent rectangular area within item's coordinate system, and returns the mapped rectangle value.

QRectF	mapRectToScene (const QRectF &rect) const
	Maps the given rect in this item's coordinate system to the equivalent rectangular area within the scene's coordinate system, and returns the mapped rectangle value.

QPointF	mapFromScene (const QPointF &point) const
	Maps the given point in the scene's coordinate system to the equivalent point within this item's coordinate system, and returns the mapped coordinate.

QRectF	mapRectFromItem (const QQuickItem *item, const QRectF &rect) const
	Maps the given rect in item's coordinate system to the equivalent rectangular area within this item's coordinate system, and returns the mapped rectangle value.

QRectF	mapRectFromScene (const QRectF &rect) const
	Maps the given rect in the scene's coordinate system to the equivalent rectangular area within this item's coordinate system, and returns the mapped rectangle value.

void	polish ()
	Schedules a polish event for this item.

Q_INVOKABLE QPointF	mapFromItem (const QQuickItem *item, const QPointF &point) const
	Maps the given point in item's coordinate system to the equivalent point within this item's coordinate system, and returns the mapped coordinate.

Q_INVOKABLE QPointF	mapFromItem (const QQuickItem *item, qreal x, qreal y)

Q_INVOKABLE QRectF	mapFromItem (const QQuickItem *item, const QRectF &rect) const

Q_INVOKABLE QRectF	mapFromItem (const QQuickItem *item, qreal x, qreal y, qreal width, qreal height) const

Q_INVOKABLE QPointF	mapToItem (const QQuickItem *item, const QPointF &point) const
	Maps the given point in this item's coordinate system to the equivalent point within item's coordinate system, and returns the mapped coordinate.

Q_INVOKABLE QPointF	mapToItem (const QQuickItem *item, qreal x, qreal y)

Q_INVOKABLE QRectF	mapToItem (const QQuickItem *item, const QRectF &rect) const

Q_INVOKABLE QRectF	mapToItem (const QQuickItem *item, qreal x, qreal y, qreal width, qreal height) const

	Q_REVISION (2, 7) Q_INVOKABLE QPointF mapFromGlobal(qreal x

	Q_REVISION (2, 7) Q_INVOKABLE QPointF mapFromGlobal(const QPointF &point) const

	Q_REVISION (2, 7) Q_INVOKABLE QPointF mapToGlobal(qreal x

	Q_REVISION (2, 7) Q_INVOKABLE QPointF mapToGlobal(const QPointF &point) const

Q_INVOKABLE void	forceActiveFocus ()
	\qmlmethod point QtQuick::Item::mapToItem(Item item, real x, real y) \qmlmethod point QtQuick::Item::mapToItem(Item item, point p) \qmlmethod rect QtQuick::Item::mapToItem(Item item, real x, real y, real width, real height) \qmlmethod rect QtQuick::Item::mapToItem(Item item, rect r)

Q_INVOKABLE void	forceActiveFocus (Qt::FocusReason reason)
	\qmlmethod QtQuick::Item::forceActiveFocus(Qt::FocusReason reason) This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.Forces active focus on the item with the given reason.

	Q_REVISION (2, 1) Q_INVOKABLE QQuickItem *nextItemInFocusChain(bool forward

Q_INVOKABLE QQuickItem *	childAt (qreal x, qreal y) const
	\qmlmethod QtQuick::Item::childAt(real x, real y)

	Q_REVISION (6, 3) Q_INVOKABLE void ensurePolished()

	Q_REVISION (6, 3) Q_INVOKABLE void dumpItemTree() const

virtual bool	isTextureProvider () const
	Returns true if this item is a texture provider.

virtual QSGTextureProvider *	textureProvider () const
	Returns the texture provider for an item.

Public Member Functions inherited from QObject
Q_INVOKABLE	QObject (QObject *parent=nullptr)
	Constructs an object with parent object parent.

virtual	~QObject ()
	Destroys the object, deleting all its child objects.

virtual bool	eventFilter (QObject watched, QEvent event)
	Filters events if this object has been installed as an event filter for the watched object.

QString	objectName () const

Q_WEAK_OVERLOAD void	setObjectName (const QString &name)
	Sets the object's name to name.

void	setObjectName (QAnyStringView name)
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

QBindable< QString >	bindableObjectName ()

bool	isWidgetType () const
	Returns `true` if the object is a widget; otherwise returns `false`.

bool	isWindowType () const
	Returns `true` if the object is a window; otherwise returns `false`.

bool	isQuickItemType () const
	Returns `true` if the object is a QQuickItem; otherwise returns `false`.

bool	signalsBlocked () const noexcept
	Returns `true` if signals are blocked; otherwise returns `false`.

bool	blockSignals (bool b) noexcept
	If block is true, signals emitted by this object are blocked (i.e., emitting a signal will not invoke anything connected to it).

QThread *	thread () const
	Returns the thread in which the object lives.

bool	moveToThread (QThread *thread QT6_DECL_NEW_OVERLOAD_TAIL)
	Changes the thread affinity for this object and its children and returns `true` on success.

int	startTimer (int interval, Qt::TimerType timerType=Qt::CoarseTimer)
	This is an overloaded function that will start a timer of type timerType and a timeout of interval milliseconds.

int	startTimer (std::chrono::nanoseconds time, Qt::TimerType timerType=Qt::CoarseTimer)

void	killTimer (int id)
	Kills the timer with timer identifier, id.

void	killTimer (Qt::TimerId id)

template<typename T >
T	findChild (QAnyStringView aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	Returns the child of this object that can be cast into type T and that is called name, or \nullptr if there is no such object.

template<typename T >
QList< T >	findChildren (QAnyStringView aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects.

template<typename T >
T	findChild (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

template<typename T >
QList< T >	findChildren (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

const QObjectList &	children () const
	Returns a list of child objects.

void	setParent (QObject *parent)
	Makes the object a child of parent.

void	installEventFilter (QObject *filterObj)
	Installs an event filter filterObj on this object.

void	removeEventFilter (QObject *obj)
	Removes an event filter object obj from this object.

QMetaObject::Connection	connect (const QObject sender, const char signal, const char *member, Qt::ConnectionType type=Qt::AutoConnection) const

bool	disconnect (const char signal=nullptr, const QObject receiver=nullptr, const char *member=nullptr) const

bool	disconnect (const QObject receiver, const char member=nullptr) const

void	dumpObjectTree () const
	Dumps a tree of children to the debug output.

void	dumpObjectInfo () const
	Dumps information about signal connections, etc.

bool	setProperty (const char *name, const QVariant &value)
	Sets the value of the object's name property to value.

bool	setProperty (const char *name, QVariant &&value)

QVariant	property (const char *name) const
	Returns the value of the object's name property.

QList< QByteArray >	dynamicPropertyNames () const

QBindingStorage *	bindingStorage ()

const QBindingStorage *	bindingStorage () const

QObject *	parent () const
	Returns a pointer to the parent object.

bool	inherits (const char *classname) const
	Returns `true` if this object is an instance of a class that inherits className or a QObject subclass that inherits className; otherwise returns `false`.

Public Member Functions inherited from QQmlParserStatus
	QQmlParserStatus ()

virtual	~QQmlParserStatus ()

Static Public Member Functions
static QQuickDialogButtonBoxAttached *	qmlAttachedProperties (QObject *object)

Static Public Member Functions inherited from QObject
static QMetaObject::Connection	connect (const QObject sender, const char signal, const QObject receiver, const char member, Qt::ConnectionType=Qt::AutoConnection)
	\threadsafe

static QMetaObject::Connection	connect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &method, Qt::ConnectionType type=Qt::AutoConnection)

template<typename Func1 , typename Func2 >
static QMetaObject::Connection	connect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const typename QtPrivate::ContextTypeForFunctor< Func2 >::ContextType context, Func2 &&slot, Qt::ConnectionType type=Qt::AutoConnection)

template<typename Func1 , typename Func2 >
static QMetaObject::Connection	connect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, Func2 &&slot)

static bool	disconnect (const QObject sender, const char signal, const QObject receiver, const char member)
	\threadsafe

static bool	disconnect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &member)

static bool	disconnect (const QMetaObject::Connection &)
	Disconnect a connection.

template<typename Func1 , typename Func2 >
static bool	disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const typename QtPrivate::FunctionPointer< Func2 >::Object receiver, Func2 slot)

template<typename Func1 >
static bool	disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const QObject receiver, void **zero)

Protected Member Functions
void	updatePolish () override
	This function should perform any layout as required for this item.

void	componentComplete () override
	Invoked after the root component that caused this instantiation has completed construction.

void	geometryChange (const QRectF &newGeometry, const QRectF &oldGeometry) override

void	contentItemChange (QQuickItem newItem, QQuickItem oldItem) override

bool	isContent (QQuickItem *item) const override

void	itemAdded (int index, QQuickItem *item) override

void	itemRemoved (int index, QQuickItem *item) override

bool	event (QEvent *e) override
	This virtual function receives events to an object and should return true if the event e was recognized and processed.

Protected Member Functions inherited from QQuickContainer
	QQuickContainer (QQuickContainerPrivate &dd, QQuickItem *parent)

void	itemChange (ItemChange change, const ItemChangeData &data) override
	Called when change occurs for this item.

virtual void	itemMoved (int index, QQuickItem *item)

Protected Member Functions inherited from QQuickControl
virtual QFont	defaultFont () const

	QQuickControl (QQuickControlPrivate &dd, QQuickItem *parent)

void	classBegin () override
	Invoked after class creation, but before any properties have been set.

void	itemChange (ItemChange change, const ItemChangeData &value) override
	Called when change occurs for this item.

void	focusInEvent (QFocusEvent *event) override
	This event handler can be reimplemented in a subclass to receive focus-in events for an item.

void	focusOutEvent (QFocusEvent *event) override
	This event handler can be reimplemented in a subclass to receive focus-out events for an item.

void	mousePressEvent (QMouseEvent *event) override
	This event handler can be reimplemented in a subclass to receive mouse press events for an item.

void	mouseMoveEvent (QMouseEvent *event) override
	This event handler can be reimplemented in a subclass to receive mouse move events for an item.

void	mouseReleaseEvent (QMouseEvent *event) override
	This event handler can be reimplemented in a subclass to receive mouse release events for an item.

void	mouseUngrabEvent () override
	This event handler can be reimplemented in a subclass to be notified when a mouse ungrab event has occurred on this item.

virtual void	fontChange (const QFont &newFont, const QFont &oldFont)

virtual void	mirrorChange ()

virtual void	spacingChange (qreal newSpacing, qreal oldSpacing)

virtual void	paddingChange (const QMarginsF &newPadding, const QMarginsF &oldPadding)

virtual void	localeChange (const QLocale &newLocale, const QLocale &oldLocale)

virtual void	insetChange (const QMarginsF &newInset, const QMarginsF &oldInset)

virtual void	enabledChange ()

QString	accessibleName () const

void	maybeSetAccessibleName (const QString &name)

QVariant	accessibleProperty (const char *propertyName)

bool	setAccessibleProperty (const char *propertyName, const QVariant &value)

Protected Member Functions inherited from QQuickItem
bool	event (QEvent *) override
	\reimp

bool	isComponentComplete () const
	Returns true if construction of the QML component is complete; otherwise returns false.

bool	widthValid () const
	Returns whether the width property has been set explicitly.

bool	heightValid () const
	Returns whether the height property has been set explicitly.

void	setImplicitSize (qreal, qreal)

void	classBegin () override
	\reimp Derived classes should call the base class method before adding their own action to perform at classBegin.

void	componentComplete () override
	\reimp Derived classes should call the base class method before adding their own actions to perform at componentComplete.

virtual void	keyPressEvent (QKeyEvent *event)
	This event handler can be reimplemented in a subclass to receive key press events for an item.

virtual void	keyReleaseEvent (QKeyEvent *event)
	This event handler can be reimplemented in a subclass to receive key release events for an item.

virtual void	mouseDoubleClickEvent (QMouseEvent *event)
	This event handler can be reimplemented in a subclass to receive mouse double-click events for an item.

virtual void	touchUngrabEvent ()
	This event handler can be reimplemented in a subclass to be notified when a touch ungrab event has occurred on this item.

virtual void	touchEvent (QTouchEvent *event)
	This event handler can be reimplemented in a subclass to receive touch events for an item.

virtual void	hoverEnterEvent (QHoverEvent *event)
	This event handler can be reimplemented in a subclass to receive hover-enter events for an item.

virtual void	hoverMoveEvent (QHoverEvent *event)
	This event handler can be reimplemented in a subclass to receive hover-move events for an item.

virtual void	hoverLeaveEvent (QHoverEvent *event)
	This event handler can be reimplemented in a subclass to receive hover-leave events for an item.

virtual bool	childMouseEventFilter (QQuickItem , QEvent )
	Reimplement this method to filter the pointer events that are received by this item's children.

virtual QSGNode *	updatePaintNode (QSGNode , UpdatePaintNodeData )
	Called on the render thread when it is time to sync the state of the item with the scene graph.

virtual void	releaseResources ()
	This function is called when an item should release graphics resources which are not already managed by the nodes returned from QQuickItem::updatePaintNode().

	QQuickItem (QQuickItemPrivate &dd, QQuickItem *parent=nullptr)

Protected Member Functions inherited from QObject
QObject *	sender () const
	Returns a pointer to the object that sent the signal, if called in a slot activated by a signal; otherwise it returns \nullptr.

int	senderSignalIndex () const

int	receivers (const char *signal) const
	Returns the number of receivers connected to the signal.

bool	isSignalConnected (const QMetaMethod &signal) const

virtual void	timerEvent (QTimerEvent *event)
	This event handler can be reimplemented in a subclass to receive timer events for the object.

virtual void	childEvent (QChildEvent *event)
	This event handler can be reimplemented in a subclass to receive child events.

virtual void	customEvent (QEvent *event)
	This event handler can be reimplemented in a subclass to receive custom events.

virtual void	connectNotify (const QMetaMethod &signal)

virtual void	disconnectNotify (const QMetaMethod &signal)

	QObject (QObjectPrivate &dd, QObject *parent=nullptr)

Properties
Position	position

Qt::Alignment	alignment

QPlatformDialogHelper::StandardButtons	standardButtons

QQmlComponent *	delegate

QPlatformDialogHelper::ButtonLayout	buttonLayout

Properties inherited from QQuickContainer
int	count

QVariant	contentModel

QQmlListProperty< QObject >	contentData
	\qmlproperty list<QtObject> QtQuick.Controls::Container::contentData \qmldefault

QQmlListProperty< QQuickItem >	contentChildren
	\qmlproperty list<Item> QtQuick.Controls::Container::contentChildren

int	currentIndex

QQuickItem *	currentItem

qreal	contentWidth

qreal	contentHeight

Properties inherited from QQuickControl
QFont	font

qreal	availableWidth

qreal	availableHeight

qreal	padding

qreal	topPadding

qreal	leftPadding

qreal	rightPadding

qreal	bottomPadding

qreal	spacing

QLocale	locale

bool	mirrored

Qt::FocusReason	focusReason

bool	visualFocus

bool	hovered

bool	hoverEnabled

bool	wheelEnabled

QQuickItem *	background

QQuickItem *	contentItem

qreal	baselineOffset

qreal	horizontalPadding

qreal	verticalPadding

qreal	implicitContentWidth

qreal	implicitContentHeight

qreal	implicitBackgroundWidth

qreal	implicitBackgroundHeight

qreal	topInset

qreal	leftInset

qreal	rightInset

qreal	bottomInset

Properties inherited from QQuickItem
QQuickItem *	parent
	\qmlproperty Item QtQuick::Item::parent This property holds the visual parent of the item.

qreal	x
	\qmlproperty real QtQuick::Item::x \qmlproperty real QtQuick::Item::y \qmlproperty real QtQuick::Item::width \qmlproperty real QtQuick::Item::height

qreal	y
	Defines the item's y position relative to its parent.

qreal	z
	\qmlproperty real QtQuick::Item::z

qreal	width
	This property holds the width of this item.

qreal	height
	This property holds the height of this item.

qreal	opacity
	\qmlproperty real QtQuick::Item::opacity

bool	enabled
	\qmlproperty bool QtQuick::Item::enabled

bool	visible
	\qmlproperty bool QtQuick::Item::visible

Qt::FocusPolicy	focusPolicy
	\qmlproperty enumeration QtQuick::Item::focusPolicy

qreal	rotation
	\qmlproperty real QtQuick::Item::rotation This property holds the rotation of the item in degrees clockwise around its transformOrigin.

qreal	scale
	\qmlproperty real QtQuick::Item::scale This property holds the scale factor for this item.

TransformOrigin	transformOrigin
	\qmlproperty enumeration QtQuick::Item::transformOrigin This property holds the origin point around which scale and rotation transform.

QPointF	transformOriginPoint

QQmlListProperty< QQuickTransform >	transform
	\qmlproperty list<Transform> QtQuick::Item::transform This property holds the list of transformations to apply.

bool	smooth
	\qmlproperty bool QtQuick::Item::smooth

bool	antialiasing
	\qmlproperty bool QtQuick::Item::antialiasing

qreal	implicitWidth

qreal	implicitHeight

QObject *	containmentMask
	\qmlproperty QObject* QtQuick::Item::containmentMask

Properties inherited from QObject
QString	objectName
	the name of this object

Additional Inherited Members
Public Slots inherited from QQuickContainer
void	setCurrentIndex (int index)
	\qmlmethod void QtQuick.Controls::Container::setCurrentIndex(int index)

	Q_REVISION (2, 1) void incrementCurrentIndex()

	Q_REVISION (2, 1) void decrementCurrentIndex()

Public Slots inherited from QQuickItem
void	update ()
	Schedules a call to updatePaintNode() for this item.

Public Slots inherited from QObject
void	deleteLater ()
	\threadsafe

Public Attributes inherited from QQuickItem
const QSize &	targetSize = QSize())

qreal y	const

Protected Attributes inherited from QObject
QScopedPointer< QObjectData >	d_ptr

Related Symbols inherited from QObject
template< class T > T	qobject_cast (const QObject *object)
	Returns the given object cast to type T if the object is of type T (or of a subclass); otherwise returns \nullptr.

template< typename T > T	qFindChildqFindChildren (const QObject *obj, const QString &name)()

template< typename T > QList< T >	qFindChildrenqFindChildren (const QObject *obj, const QString &name)()

	QObjectList
	\macro Q_CLASSINFO(Name, Value)

Detailed Description

Definition at line 31 of file qquickdialogbuttonbox_p.h.

Member Enumeration Documentation

◆ Position

enum QQuickDialogButtonBox::Position

Enumerator
Header
Footer

Definition at line 49 of file qquickdialogbuttonbox_p.h.

Constructor & Destructor Documentation

◆ QQuickDialogButtonBox()

QQuickDialogButtonBox::QQuickDialogButtonBox ( QQuickItem * parent = nullptr )

explicit

Definition at line 452 of file qquickdialogbuttonbox.cpp.

References d, QLayoutPolicy::Fixed, QQuickItemPrivate::ImplicitHeight, QQuickItemPrivate::ImplicitWidth, platformButtonLayout(), and QLayoutPolicy::Preferred.

Here is the call graph for this function:

◆ ~QQuickDialogButtonBox()

QQuickDialogButtonBox::~QQuickDialogButtonBox ( )

Definition at line 461 of file qquickdialogbuttonbox.cpp.

References contentItemChange(), and d.

Here is the call graph for this function:

Member Function Documentation

◆ accepted

void QQuickDialogButtonBox::accepted ( )

signal

Referenced by QQuickColorDialogImplAttached::setButtonBox(), QQuickFileDialogImplAttached::setButtonBox(), QQuickFontDialogImplAttached::setButtonBox(), QQuickDialog::setFooter(), and QQuickDialog::setHeader().

Here is the caller graph for this function:

◆ alignment()

Qt::Alignment QQuickDialogButtonBox::alignment ( ) const

\qmlproperty flags QtQuick.Controls::DialogButtonBox::alignment

This property holds the alignment of the buttons.

Possible values: \value undefined The buttons are resized to fill the available space. \value Qt.AlignLeft The buttons are aligned to the left. \value Qt.AlignHCenter The buttons are horizontally centered. \value Qt.AlignRight The buttons are aligned to the right. \value Qt.AlignTop The buttons are aligned to the top. \value Qt.AlignVCenter The buttons are vertically centered. \value Qt.AlignBottom The buttons are aligned to the bottom.

The default value is undefined.

Note: This property assumes a horizontal layout of the buttons. The DialogButtonBox for the \l {iOS Style}{iOS style} uses a vertical layout when there are more than two buttons, and if set to a value other than undefined, the layout of its buttons will be done horizontally.

Definition at line 525 of file qquickdialogbuttonbox.cpp.

References d.

◆ alignmentChanged

void QQuickDialogButtonBox::alignmentChanged ( )

signal

Referenced by setAlignment().

Here is the caller graph for this function:

◆ buttonLayout()

QPlatformDialogHelper::ButtonLayout QQuickDialogButtonBox::buttonLayout ( ) const

Since: QtQuick.Controls 2.5 (Qt 5.12) \qmlproperty enumeration QtQuick.Controls::DialogButtonBox::buttonLayout

This property holds the button layout policy to be used when arranging the buttons contained in the button box. The default value is platform-specific.

Available values: \value DialogButtonBox.WinLayout Use a policy appropriate for applications on Windows. \value DialogButtonBox.MacLayout Use a policy appropriate for applications on macOS. \value DialogButtonBox.KdeLayout Use a policy appropriate for applications on KDE. \value DialogButtonBox.GnomeLayout Use a policy appropriate for applications on GNOME. \value DialogButtonBox.AndroidLayout Use a policy appropriate for applications on Android.

Definition at line 678 of file qquickdialogbuttonbox.cpp.

References d.

◆ clicked

void QQuickDialogButtonBox::clicked ( QQuickAbstractButton * button )

signal

Referenced by QQuickColorDialogImplAttached::setButtonBox(), QQuickFileDialogImplAttached::setButtonBox(), QQuickFontDialogImplAttached::setButtonBox(), QQuickMessageDialogImplAttached::setButtonBox(), QQuickDialog::setFooter(), and QQuickDialog::setHeader().

Here is the caller graph for this function:

◆ componentComplete()

void QQuickDialogButtonBox::componentComplete ( )

overrideprotectedvirtual

Invoked after the root component that caused this instantiation has completed construction.

At this point all static values and binding values have been assigned to the class.

Reimplemented from QQuickContainer.

Definition at line 716 of file qquickdialogbuttonbox.cpp.

References QQuickContainer::componentComplete(), and d.

Here is the call graph for this function:

◆ contentItemChange()

void QQuickDialogButtonBox::contentItemChange	(	QQuickItem *	newItem,
		QQuickItem *	oldItem )

overrideprotectedvirtual

Reimplemented from QQuickContainer.

Definition at line 730 of file qquickdialogbuttonbox.cpp.

References QQuickContainer::contentItemChange(), d, QQuickItemPrivate::get(), QQuickItemPrivate::ImplicitHeight, and QQuickItemPrivate::ImplicitWidth.

Referenced by ~QQuickDialogButtonBox().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ delegate()

QQmlComponent * QQuickDialogButtonBox::delegate ( ) const

\qmlproperty Component QtQuick.Controls::DialogButtonBox::delegate

This property holds a delegate for creating standard buttons.

See also: standardButtons

Definition at line 642 of file qquickdialogbuttonbox.cpp.

References d.

◆ delegateChanged

void QQuickDialogButtonBox::delegateChanged ( )

signal

Referenced by setDelegate().

Here is the caller graph for this function:

◆ event()

bool QQuickDialogButtonBox::event ( QEvent * e )

overrideprotectedvirtual

This virtual function receives events to an object and should return true if the event e was recognized and processed.

The event() function can be reimplemented to customize the behavior of an object.

Make sure you call the parent event class implementation for all the events you did not handle.

Example:

class MyClass : public QWidget
{
    Q_OBJECT
 
public:
    MyClass(QWidget *parent = nullptr);
    ~MyClass();
 
    bool event(QEvent* ev) override
    {
        if (ev->type() == QEvent::PolishRequest) {
            // overwrite handling of PolishRequest if any
            doThings();
            return true;
        } else  if (ev->type() == QEvent::Show) {
            // complement handling of Show if any
            doThings2();
            QWidget::event(ev);
            return true;
        }
        // Make sure the rest of events are handled
        return QWidget::event(ev);
    }
};

See also: installEventFilter(), timerEvent(), QCoreApplication::sendEvent(), QCoreApplication::postEvent()

Reimplemented from QObject.

Definition at line 708 of file qquickdialogbuttonbox.cpp.

References d, QObject::event(), QEvent::LanguageChange, and QEvent::type().

Here is the call graph for this function:

◆ geometryChange()

void QQuickDialogButtonBox::geometryChange	(	const QRectF &	newGeometry,
		const QRectF &	oldGeometry )

overrideprotectedvirtual

Since: 6.0

This function is called to handle this item's changes in geometry from oldGeometry to newGeometry. If the two geometries are the same, it doesn't do anything.

Derived classes must call the base class method within their implementation.

Reimplemented from QQuickControl.

Definition at line 723 of file qquickdialogbuttonbox.cpp.

References d, and QQuickItem::geometryChange().

Here is the call graph for this function:

◆ helpRequested

void QQuickDialogButtonBox::helpRequested ( )

signal

◆ isContent()

bool QQuickDialogButtonBox::isContent ( QQuickItem * item ) const

overrideprotectedvirtual

Reimplemented from QQuickContainer.

Definition at line 740 of file qquickdialogbuttonbox.cpp.

References item.

◆ itemAdded()

void QQuickDialogButtonBox::itemAdded	(	int	index,
		QQuickItem *	item )

overrideprotectedvirtual

Reimplemented from QQuickContainer.

Definition at line 745 of file qquickdialogbuttonbox.cpp.

References button, QQuickAbstractButton::clicked(), QObjectPrivate::connect(), d, QQuickDialogButtonBoxAttachedPrivate::get(), QQuickDialogButtonBoxPrivate::handleClick(), QQuickItem::isComponentComplete(), item, QQuickItem::polish(), and Q_UNUSED.

Here is the call graph for this function:

◆ itemRemoved()

void QQuickDialogButtonBox::itemRemoved	(	int	index,
		QQuickItem *	item )

overrideprotectedvirtual

Reimplemented from QQuickContainer.

Definition at line 758 of file qquickdialogbuttonbox.cpp.

References button, QQuickAbstractButton::clicked(), d, QObjectPrivate::disconnect(), QQuickDialogButtonBoxAttachedPrivate::get(), QQuickDialogButtonBoxPrivate::handleClick(), QQuickItem::isComponentComplete(), item, QQuickItem::polish(), and Q_UNUSED.

Here is the call graph for this function:

◆ position()

QQuickDialogButtonBox::Position QQuickDialogButtonBox::position ( ) const

\qmlproperty enumeration QtQuick.Controls::DialogButtonBox::position

This property holds the position of the button box.

Note: If the button box is assigned as a header or footer of ApplicationWindow or Page, the appropriate position is set automatically.

Possible values: \value DialogButtonBox.Header The button box is at the top, as a window or page header. \value DialogButtonBox.Footer The button box is at the bottom, as a window or page footer.

The default value is Footer.

See also: Dialog::header, Dialog::footer

Definition at line 488 of file qquickdialogbuttonbox.cpp.

References d.

◆ positionChanged

void QQuickDialogButtonBox::positionChanged ( )

signal

Referenced by setPosition().

Here is the caller graph for this function:

◆ Q_REVISION [1/4]

QQuickDialogButtonBox::Q_REVISION	(	2	,
		3	)

signal

◆ Q_REVISION [2/4]

QQuickDialogButtonBox::Q_REVISION	(	2	,
		3	)

signal

◆ Q_REVISION [3/4]

QQuickDialogButtonBox::Q_REVISION	(	2	,
		3	)

signal

◆ Q_REVISION [4/4]

QQuickDialogButtonBox::Q_REVISION	(	2	,
		5	)

signal

◆ qmlAttachedProperties()

QQuickDialogButtonBoxAttached * QQuickDialogButtonBox::qmlAttachedProperties ( QObject * object )

static

Definition at line 659 of file qquickdialogbuttonbox.cpp.

◆ rejected

void QQuickDialogButtonBox::rejected ( )

signal

Referenced by QQuickColorDialogImplAttached::setButtonBox(), QQuickFileDialogImplAttached::setButtonBox(), QQuickFontDialogImplAttached::setButtonBox(), QQuickDialog::setFooter(), and QQuickDialog::setHeader().

Here is the caller graph for this function:

◆ resetAlignment()

void QQuickDialogButtonBox::resetAlignment ( )

Definition at line 545 of file qquickdialogbuttonbox.cpp.

References setAlignment().

Here is the call graph for this function:

◆ resetButtonLayout()

void QQuickDialogButtonBox::resetButtonLayout ( )

Definition at line 696 of file qquickdialogbuttonbox.cpp.

References platformButtonLayout(), and setButtonLayout().

Here is the call graph for this function:

◆ setAlignment()

void QQuickDialogButtonBox::setAlignment ( Qt::Alignment alignment )

Definition at line 531 of file qquickdialogbuttonbox.cpp.

References alignment, alignmentChanged(), d, emit, QQuickItem::isComponentComplete(), and QQuickItem::polish().

Referenced by resetAlignment().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ setButtonLayout()

void QQuickDialogButtonBox::setButtonLayout ( QPlatformDialogHelper::ButtonLayout layout )

Definition at line 684 of file qquickdialogbuttonbox.cpp.

References d, emit, QQuickItem::isComponentComplete(), and layout.

Referenced by resetButtonLayout().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ setDelegate()

void QQuickDialogButtonBox::setDelegate ( QQmlComponent * delegate )

Definition at line 648 of file qquickdialogbuttonbox.cpp.

References d, delegate, delegateChanged(), and emit.

Here is the call graph for this function:

◆ setPosition()

void QQuickDialogButtonBox::setPosition ( Position position )

Definition at line 494 of file qquickdialogbuttonbox.cpp.

References d, emit, position, and positionChanged().

Here is the call graph for this function:

◆ setStandardButtons()

void QQuickDialogButtonBox::setStandardButtons ( QPlatformDialogHelper::StandardButtons buttons )

Definition at line 588 of file qquickdialogbuttonbox.cpp.

References QQuickContainer::addItem(), button, d, emit, QPlatformDialogHelper::FirstButton, i, QQuickItem::isComponentComplete(), QPlatformDialogHelper::LastButton, QQuickItem::polish(), standardButton(), and standardButtonsChanged().

Referenced by QQuickMessageDialogImpl::setOptions().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ standardButton()

QQuickAbstractButton * QQuickDialogButtonBox::standardButton ( QPlatformDialogHelper::StandardButton button ) const

\qmlmethod AbstractButton QtQuick.Controls::DialogButtonBox::standardButton(StandardButton button)

Returns the specified standard button, or null if it does not exist.

See also: standardButtons

Definition at line 619 of file qquickdialogbuttonbox.cpp.

References btn, button, QQuickContainer::count, d, QQuickDialogButtonBoxAttachedPrivate::get(), i, Q_LIKELY, Q_UNLIKELY, and standardButton().

Referenced by QQuickFileDialogDelegatePrivate::chooseFile(), QQuickFileDialogImpl::setAcceptLabel(), QQuickFileDialogImpl::setRejectLabel(), setStandardButtons(), standardButton(), QQuickFileDialogImplPrivate::updateEnabled(), and QQuickFolderDialogImplPrivate::updateEnabled().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ standardButtons()

QPlatformDialogHelper::StandardButtons QQuickDialogButtonBox::standardButtons ( ) const

\qmlproperty enumeration QtQuick.Controls::DialogButtonBox::standardButtons

This property holds a combination of standard buttons that are used by the button box.

DialogButtonBox {
    standardButtons: DialogButtonBox.Ok | DialogButtonBox.Cancel
 
    onAccepted: console.log("Ok clicked")
    onRejected: console.log("Cancel clicked")
}

The buttons will be positioned in the appropriate order for the user's platform.

Possible flags: \value DialogButtonBox.Ok An "OK" button defined with the AcceptRole. \value DialogButtonBox.Open An "Open" button defined with the AcceptRole. \value DialogButtonBox.Save A "Save" button defined with the AcceptRole. \value DialogButtonBox.Cancel A "Cancel" button defined with the RejectRole. \value DialogButtonBox.Close A "Close" button defined with the RejectRole. \value DialogButtonBox.Discard A "Discard" or "Don't Save" button, depending on the platform, defined with the DestructiveRole. \value DialogButtonBox.Apply An "Apply" button defined with the ApplyRole. \value DialogButtonBox.Reset A "Reset" button defined with the ResetRole. \value DialogButtonBox.RestoreDefaults A "Restore Defaults" button defined with the ResetRole. \value DialogButtonBox.Help A "Help" button defined with the HelpRole. \value DialogButtonBox.SaveAll A "Save All" button defined with the AcceptRole. \value DialogButtonBox.Yes A "Yes" button defined with the YesRole. \value DialogButtonBox.YesToAll A "Yes to All" button defined with the YesRole. \value DialogButtonBox.No A "No" button defined with the NoRole. \value DialogButtonBox.NoToAll A "No to All" button defined with the NoRole. \value DialogButtonBox.Abort An "Abort" button defined with the RejectRole. \value DialogButtonBox.Retry A "Retry" button defined with the AcceptRole. \value DialogButtonBox.Ignore An "Ignore" button defined with the AcceptRole. \value DialogButtonBox.NoButton An invalid button.

See also: standardButton()

Definition at line 582 of file qquickdialogbuttonbox.cpp.

References d.

◆ standardButtonsChanged

void QQuickDialogButtonBox::standardButtonsChanged ( )

signal

Referenced by setStandardButtons().

Here is the caller graph for this function:

◆ updatePolish()

void QQuickDialogButtonBox::updatePolish ( )

overrideprotectedvirtual

This function should perform any layout as required for this item.

When polish() is called, the scene graph schedules a polish event for this item. When the scene graph is ready to render this item, it calls updatePolish() to do any item layout as required before it renders the next frame.

See also: ensurePolished()

Reimplemented from QQuickItem.

Definition at line 701 of file qquickdialogbuttonbox.cpp.

References d, and QQuickItem::updatePolish().

Here is the call graph for this function:

Property Documentation

◆ alignment

Qt::Alignment QQuickDialogButtonBox::alignment

readwrite

Definition at line 35 of file qquickdialogbuttonbox_p.h.

Referenced by setAlignment().

◆ buttonLayout

QPlatformDialogHelper::ButtonLayout QQuickDialogButtonBox::buttonLayout

readwrite

Definition at line 39 of file qquickdialogbuttonbox_p.h.

◆ delegate

QQmlComponent * QQuickDialogButtonBox::delegate

readwrite

Definition at line 37 of file qquickdialogbuttonbox_p.h.

Referenced by setDelegate().

◆ position

Position QQuickDialogButtonBox::position

readwrite

Definition at line 34 of file qquickdialogbuttonbox_p.h.

Referenced by setPosition().

◆ standardButtons

QPlatformDialogHelper::StandardButtons QQuickDialogButtonBox::standardButtons

readwrite

Definition at line 36 of file qquickdialogbuttonbox_p.h.

The documentation for this class was generated from the following files:

qtdeclarative/src/quicktemplates/qquickdialogbuttonbox_p.h (6f6a68182b675a8f619f434a2c8052aac61cc788)
qtdeclarative/src/quicktemplates/qquickdialogbuttonbox.cpp (2451ff25a531a2427825726f4b5f015fb01d2663)

Public Types

Signals

Public Member Functions

Static Public Member Functions

Protected Member Functions

Properties

Additional Inherited Members

Detailed Description

Member Enumeration Documentation

◆ Position

Constructor & Destructor Documentation

◆ QQuickDialogButtonBox()

◆ ~QQuickDialogButtonBox()

Member Function Documentation

◆ accepted

◆ alignment()

◆ alignmentChanged

◆ buttonLayout()

◆ clicked

◆ componentComplete()

◆ contentItemChange()

◆ delegate()

◆ delegateChanged

◆ event()

◆ geometryChange()

◆ helpRequested

◆ isContent()

◆ itemAdded()

◆ itemRemoved()

◆ position()

◆ positionChanged

◆ Q_REVISION [1/4]

◆ Q_REVISION [2/4]

◆ Q_REVISION [3/4]

◆ Q_REVISION [4/4]

◆ qmlAttachedProperties()

◆ rejected

◆ resetAlignment()

◆ resetButtonLayout()

◆ setAlignment()

◆ setButtonLayout()

◆ setDelegate()

◆ setPosition()

◆ setStandardButtons()

◆ standardButton()

◆ standardButtons()

◆ standardButtonsChanged

◆ updatePolish()

Property Documentation

◆ alignment

◆ buttonLayout

◆ delegate

◆ position

◆ standardButtons