|
| | QQuickViewTransitionAttached (QObject *parent) |
| |
| int | index () const |
| |
| QQuickItem * | item () const |
| |
| QPointF | destination () const |
| |
| QList< int > | targetIndexes () const |
| |
| QQmlListProperty< QObject > | targetItems () |
| |
| Q_INVOKABLE | QObject (QObject *parent=nullptr) |
| | Constructs an object with parent object parent.
|
| |
| virtual | ~QObject () |
| | Destroys the object, deleting all its child objects.
|
| |
| virtual bool | event (QEvent *event) |
| | This virtual function receives events to an object and should return true if the event e was recognized and processed.
|
| |
| virtual bool | eventFilter (QObject *watched, QEvent *event) |
| | Filters events if this object has been installed as an event filter for the watched object.
|
| |
| QString | objectName () const |
| |
| Q_WEAK_OVERLOAD void | setObjectName (const QString &name) |
| | Sets the object's name to name.
|
| |
| void | setObjectName (QAnyStringView name) |
| | This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.
|
| |
| QBindable< QString > | bindableObjectName () |
| |
| bool | isWidgetType () const |
| | Returns true if the object is a widget; otherwise returns false.
|
| |
| bool | isWindowType () const |
| | Returns true if the object is a window; otherwise returns false.
|
| |
| bool | isQuickItemType () const |
| | Returns true if the object is a QQuickItem; otherwise returns false.
|
| |
| bool | signalsBlocked () const noexcept |
| | Returns true if signals are blocked; otherwise returns false.
|
| |
| bool | blockSignals (bool b) noexcept |
| | If block is true, signals emitted by this object are blocked (i.e., emitting a signal will not invoke anything connected to it).
|
| |
| QThread * | thread () const |
| | Returns the thread in which the object lives.
|
| |
| bool | moveToThread (QThread *thread QT6_DECL_NEW_OVERLOAD_TAIL) |
| | Changes the thread affinity for this object and its children and returns true on success.
|
| |
| int | startTimer (int interval, Qt::TimerType timerType=Qt::CoarseTimer) |
| | This is an overloaded function that will start a timer of type timerType and a timeout of interval milliseconds.
|
| |
| int | startTimer (std::chrono::nanoseconds time, Qt::TimerType timerType=Qt::CoarseTimer) |
| |
| void | killTimer (int id) |
| | Kills the timer with timer identifier, id.
|
| |
| void | killTimer (Qt::TimerId id) |
| |
| template<typename T > |
| T | findChild (QAnyStringView aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const |
| | Returns the child of this object that can be cast into type T and that is called name, or \nullptr if there is no such object.
|
| |
| template<typename T > |
| QList< T > | findChildren (QAnyStringView aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const |
| | Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects.
|
| |
| template<typename T > |
| T | findChild (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const |
| | This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.
|
| |
| template<typename T > |
| QList< T > | findChildren (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const |
| | This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.
|
| |
| const QObjectList & | children () const |
| | Returns a list of child objects.
|
| |
| void | setParent (QObject *parent) |
| | Makes the object a child of parent.
|
| |
| void | installEventFilter (QObject *filterObj) |
| | Installs an event filter filterObj on this object.
|
| |
| void | removeEventFilter (QObject *obj) |
| | Removes an event filter object obj from this object.
|
| |
| QMetaObject::Connection | connect (const QObject *sender, const char *signal, const char *member, Qt::ConnectionType type=Qt::AutoConnection) const |
| |
| bool | disconnect (const char *signal=nullptr, const QObject *receiver=nullptr, const char *member=nullptr) const |
| |
| bool | disconnect (const QObject *receiver, const char *member=nullptr) const |
| |
| void | dumpObjectTree () const |
| | Dumps a tree of children to the debug output.
|
| |
| void | dumpObjectInfo () const |
| | Dumps information about signal connections, etc.
|
| |
| bool | setProperty (const char *name, const QVariant &value) |
| | Sets the value of the object's name property to value.
|
| |
| bool | setProperty (const char *name, QVariant &&value) |
| |
| QVariant | property (const char *name) const |
| | Returns the value of the object's name property.
|
| |
| QList< QByteArray > | dynamicPropertyNames () const |
| |
| QBindingStorage * | bindingStorage () |
| |
| const QBindingStorage * | bindingStorage () const |
| |
| QObject * | parent () const |
| | Returns a pointer to the parent object.
|
| |
| bool | inherits (const char *classname) const |
| | Returns true if this object is an instance of a class that inherits className or a QObject subclass that inherits className; otherwise returns false.
|
| |
|
| static QQuickViewTransitionAttached * | qmlAttachedProperties (QObject *) |
| |
| static QMetaObject::Connection | connect (const QObject *sender, const char *signal, const QObject *receiver, const char *member, Qt::ConnectionType=Qt::AutoConnection) |
| | \threadsafe
|
| |
| static QMetaObject::Connection | connect (const QObject *sender, const QMetaMethod &signal, const QObject *receiver, const QMetaMethod &method, Qt::ConnectionType type=Qt::AutoConnection) |
| |
| template<typename Func1 , typename Func2 > |
| static QMetaObject::Connection | connect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, const typename QtPrivate::ContextTypeForFunctor< Func2 >::ContextType *context, Func2 &&slot, Qt::ConnectionType type=Qt::AutoConnection) |
| |
| template<typename Func1 , typename Func2 > |
| static QMetaObject::Connection | connect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, Func2 &&slot) |
| |
| static bool | disconnect (const QObject *sender, const char *signal, const QObject *receiver, const char *member) |
| | \threadsafe
|
| |
| static bool | disconnect (const QObject *sender, const QMetaMethod &signal, const QObject *receiver, const QMetaMethod &member) |
| |
| static bool | disconnect (const QMetaObject::Connection &) |
| | Disconnect a connection.
|
| |
| template<typename Func1 , typename Func2 > |
| static bool | disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, const typename QtPrivate::FunctionPointer< Func2 >::Object *receiver, Func2 slot) |
| |
| template<typename Func1 > |
| static bool | disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, const QObject *receiver, void **zero) |
| |
\qmltype ViewTransition \instantiates QQuickViewTransitionAttached \inqmlmodule QtQuick
Specifies items under transition in a view.
With ListView and GridView, it is possible to specify transitions that should be applied whenever the items in the view change as a result of modifications to the view's model. They both have the following properties that can be set to the appropriate transitions to be run for various operations:
\list
populate - the transition to apply to the items created initially for the view, or when the model changes add - the transition to apply to items that are added to the view after it has been created remove - the transition to apply to items that are removed from the view move - the transition to apply to items that are moved within the view (i.e. as a result of a move operation in the model) displaced - the generic transition to be applied to any items that are displaced by an add, move or remove operation addDisplaced, removeDisplaced and moveDisplaced - the transitions to be applied when items are displaced by add, move, or remove operations, respectively (these override the generic displaced transition if specified) \endlist
For the \l Row, \l Column, \l Grid and \l Flow positioner types, which operate with collections of child items rather than data models, the following properties are used instead:
\list
populate - the transition to apply to items that have been added to the positioner at the time of its creation add - the transition to apply to items that are added to or reparented to the positioner, or items that have become \l {Item::}{visible} move - the transition to apply to items that have moved within the positioner, including when they are displaced due to the addition or removal of other items, or when items are otherwise rearranged within the positioner, or when items are repositioned due to the resizing of other items in the positioner \endlist
View transitions have access to a ViewTransition attached property that provides details of the items that are under transition and the operation that triggered the transition. Since view transitions are run once per item, these details can be used to customize each transition for each individual item.
The ViewTransition attached property provides the following properties specific to the item to which the transition is applied:
\list
- ViewTransition.item - the item that is under transition
- ViewTransition.index - the index of this item
- ViewTransition.destination - the (x,y) point to which this item is moving for the relevant view operation \endlist
In addition, ViewTransition provides properties specific to the items which are the target of the operation that triggered the transition:
\list
- ViewTransition.targetIndexes - the indexes of the target items
- ViewTransition.targetItems - the target items themselves \endlist
(Note that for the \l Row, \l Column, \l Grid and \l Flow positioner types, the move transition only provides these two additional details when the transition is triggered by the addition of items to a positioner.)
View transitions can be written without referring to any of the attributes listed above. These attributes merely provide extra details that are useful for customising view transitions.
Following is an introduction to view transitions and the ways in which the ViewTransition attached property can be used to augment view transitions.
Definition at line 162 of file qquickitemviewtransition_p.h.
Inheritance diagram for QQuickViewTransitionAttached:
1.10.0