#include <qquick3dfog_p.h>

Inheritance diagram for QQuick3DFog:

Collaboration diagram for QQuick3DFog:

Public Slots
void	setEnabled (bool newEnabled)

void	setColor (const QColor &newColor)

void	setDensity (float newDensity)

void	setDepthEnabled (bool newDepthEnabled)

void	setDepthNear (float newDepthNear)

void	setDepthFar (float newDepthFar)

void	setDepthCurve (float newDepthCurve)

void	setHeightEnabled (bool newHeightEnabled)

void	setLeastIntenseY (float newleastIntenseY)

void	setMostIntenseY (float newmostIntenseY)

void	setHeightCurve (float newHeightCurve)

void	setTransmitEnabled (bool newTransmitEnabled)

void	setTransmitCurve (float newTransmitCurve)

Public Slots inherited from QObject
void	deleteLater ()
	\threadsafe

Signals
void	changed ()

void	enabledChanged ()

void	colorChanged ()

void	densityChanged ()

void	depthEnabledChanged ()

void	depthNearChanged ()

void	depthFarChanged ()

void	depthCurveChanged ()

void	heightEnabledChanged ()

void	leastIntenseYChanged ()

void	mostIntenseYChanged ()

void	heightCurveChanged ()

void	transmitEnabledChanged ()

void	transmitCurveChanged ()

Signals inherited from QObject
void	destroyed (QObject *=nullptr)
	This signal is emitted immediately before the object obj is destroyed, after any instances of QPointer have been notified, and cannot be blocked.

void	objectNameChanged (const QString &objectName, QPrivateSignal)
	This signal is emitted after the object's name has been changed.

Public Member Functions
bool	isEnabled () const
	\qmltype Fog \inherits Object \inqmlmodule QtQuick3D

QColor	color () const
	\qmlproperty color Fog::color

float	density () const
	\qmlproperty float Fog::density

bool	isDepthEnabled () const
	\qmlproperty bool Fog::depthEnabled

float	depthNear () const
	\qmlproperty float Fog::depthNear

float	depthFar () const
	\qmlproperty float Fog::depthFar

float	depthCurve () const
	\qmlproperty float Fog::depthCurve

bool	isHeightEnabled () const
	\qmlproperty bool Fog::heightEnabled

float	leastIntenseY () const
	\qmlproperty float Fog::leastIntenseY

float	mostIntenseY () const
	\qmlproperty float Fog::mostIntenseY

float	heightCurve () const
	\qmlproperty float Fog::heightCurve

bool	isTransmitEnabled () const
	\qmlproperty bool Fog::transmitEnabled

float	transmitCurve () const
	\qmlproperty float Fog::transmitCurve

Public Member Functions inherited from QObject
Q_INVOKABLE	QObject (QObject *parent=nullptr)
	Constructs an object with parent object parent.

virtual	~QObject ()
	Destroys the object, deleting all its child objects.

virtual bool	event (QEvent *event)
	This virtual function receives events to an object and should return true if the event e was recognized and processed.

virtual bool	eventFilter (QObject watched, QEvent event)
	Filters events if this object has been installed as an event filter for the watched object.

QString	objectName () const

Q_WEAK_OVERLOAD void	setObjectName (const QString &name)
	Sets the object's name to name.

void	setObjectName (QAnyStringView name)
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

QBindable< QString >	bindableObjectName ()

bool	isWidgetType () const
	Returns `true` if the object is a widget; otherwise returns `false`.

bool	isWindowType () const
	Returns `true` if the object is a window; otherwise returns `false`.

bool	isQuickItemType () const
	Returns `true` if the object is a QQuickItem; otherwise returns `false`.

bool	signalsBlocked () const noexcept
	Returns `true` if signals are blocked; otherwise returns `false`.

bool	blockSignals (bool b) noexcept
	If block is true, signals emitted by this object are blocked (i.e., emitting a signal will not invoke anything connected to it).

QThread *	thread () const
	Returns the thread in which the object lives.

bool	moveToThread (QThread *thread QT6_DECL_NEW_OVERLOAD_TAIL)
	Changes the thread affinity for this object and its children and returns `true` on success.

int	startTimer (int interval, Qt::TimerType timerType=Qt::CoarseTimer)
	This is an overloaded function that will start a timer of type timerType and a timeout of interval milliseconds.

int	startTimer (std::chrono::nanoseconds time, Qt::TimerType timerType=Qt::CoarseTimer)

void	killTimer (int id)
	Kills the timer with timer identifier, id.

void	killTimer (Qt::TimerId id)

template<typename T >
T	findChild (QAnyStringView aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	Returns the child of this object that can be cast into type T and that is called name, or \nullptr if there is no such object.

template<typename T >
QList< T >	findChildren (QAnyStringView aName, Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects.

template<typename T >
T	findChild (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

template<typename T >
QList< T >	findChildren (Qt::FindChildOptions options=Qt::FindChildrenRecursively) const
	This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.

const QObjectList &	children () const
	Returns a list of child objects.

void	setParent (QObject *parent)
	Makes the object a child of parent.

void	installEventFilter (QObject *filterObj)
	Installs an event filter filterObj on this object.

void	removeEventFilter (QObject *obj)
	Removes an event filter object obj from this object.

QMetaObject::Connection	connect (const QObject sender, const char signal, const char *member, Qt::ConnectionType type=Qt::AutoConnection) const

bool	disconnect (const char signal=nullptr, const QObject receiver=nullptr, const char *member=nullptr) const

bool	disconnect (const QObject receiver, const char member=nullptr) const

void	dumpObjectTree () const
	Dumps a tree of children to the debug output.

void	dumpObjectInfo () const
	Dumps information about signal connections, etc.

bool	setProperty (const char *name, const QVariant &value)
	Sets the value of the object's name property to value.

bool	setProperty (const char *name, QVariant &&value)

QVariant	property (const char *name) const
	Returns the value of the object's name property.

QList< QByteArray >	dynamicPropertyNames () const

QBindingStorage *	bindingStorage ()

const QBindingStorage *	bindingStorage () const

QObject *	parent () const
	Returns a pointer to the parent object.

bool	inherits (const char *classname) const
	Returns `true` if this object is an instance of a class that inherits className or a QObject subclass that inherits className; otherwise returns `false`.

Properties
bool	enabled

QColor	color

float	density

bool	depthEnabled

float	depthNear

float	depthFar

float	depthCurve

bool	heightEnabled

float	leastIntenseY

float	mostIntenseY

float	heightCurve

bool	transmitEnabled

float	transmitCurve

Properties inherited from QObject
QString	objectName
	the name of this object

Additional Inherited Members
Static Public Member Functions inherited from QObject
static QMetaObject::Connection	connect (const QObject sender, const char signal, const QObject receiver, const char member, Qt::ConnectionType=Qt::AutoConnection)
	\threadsafe

static QMetaObject::Connection	connect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &method, Qt::ConnectionType type=Qt::AutoConnection)

template<typename Func1 , typename Func2 >
static QMetaObject::Connection	connect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const typename QtPrivate::ContextTypeForFunctor< Func2 >::ContextType context, Func2 &&slot, Qt::ConnectionType type=Qt::AutoConnection)

template<typename Func1 , typename Func2 >
static QMetaObject::Connection	connect (const typename QtPrivate::FunctionPointer< Func1 >::Object *sender, Func1 signal, Func2 &&slot)

static bool	disconnect (const QObject sender, const char signal, const QObject receiver, const char member)
	\threadsafe

static bool	disconnect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &member)

static bool	disconnect (const QMetaObject::Connection &)
	Disconnect a connection.

template<typename Func1 , typename Func2 >
static bool	disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const typename QtPrivate::FunctionPointer< Func2 >::Object receiver, Func2 slot)

template<typename Func1 >
static bool	disconnect (const typename QtPrivate::FunctionPointer< Func1 >::Object sender, Func1 signal, const QObject receiver, void **zero)

Protected Member Functions inherited from QObject
QObject *	sender () const
	Returns a pointer to the object that sent the signal, if called in a slot activated by a signal; otherwise it returns \nullptr.

int	senderSignalIndex () const

int	receivers (const char *signal) const
	Returns the number of receivers connected to the signal.

bool	isSignalConnected (const QMetaMethod &signal) const

virtual void	timerEvent (QTimerEvent *event)
	This event handler can be reimplemented in a subclass to receive timer events for the object.

virtual void	childEvent (QChildEvent *event)
	This event handler can be reimplemented in a subclass to receive child events.

virtual void	customEvent (QEvent *event)
	This event handler can be reimplemented in a subclass to receive custom events.

virtual void	connectNotify (const QMetaMethod &signal)

virtual void	disconnectNotify (const QMetaMethod &signal)

	QObject (QObjectPrivate &dd, QObject *parent=nullptr)

Protected Attributes inherited from QObject
QScopedPointer< QObjectData >	d_ptr

Related Symbols inherited from QObject
template< class T > T	qobject_cast (const QObject *object)
	Returns the given object cast to type T if the object is of type T (or of a subclass); otherwise returns \nullptr.

template< typename T > T	qFindChildqFindChildren (const QObject *obj, const QString &name)()

template< typename T > QList< T >	qFindChildrenqFindChildren (const QObject *obj, const QString &name)()

	QObjectList
	\macro Q_CLASSINFO(Name, Value)

Detailed Description

Definition at line 23 of file qquick3dfog_p.h.

Member Function Documentation

◆ changed

void QQuick3DFog::changed ( )

signal

Referenced by setColor(), setDensity(), setDepthCurve(), setDepthEnabled(), setDepthFar(), setDepthNear(), setEnabled(), setHeightCurve(), setHeightEnabled(), setLeastIntenseY(), setMostIntenseY(), setTransmitCurve(), and setTransmitEnabled().

Here is the caller graph for this function:

◆ color()

QColor QQuick3DFog::color ( ) const

\qmlproperty color Fog::color

The color of the fog. The default value is "#8099b3"

The same scene with color changed to be more blueish:

See also: density

Definition at line 116 of file qquick3dfog.cpp.

◆ colorChanged

void QQuick3DFog::colorChanged ( )

signal

Referenced by setColor().

Here is the caller graph for this function:

◆ density()

float QQuick3DFog::density ( ) const

\qmlproperty float Fog::density

Controls the fog amount, in practice this is a multiplier in range 0-1. The default value is 1.0. Reducing the value decreases the strength of the fog effect. Applicable only when depthEnabled is set to true.

The on-screen visual effect may be affected by a number of other settings from \l ExtendedSceneEnvironment, such as tonemapping or glow and bloom. The same density value may give different results depending on what other effects are enabled, and how those are configured.

An example scene with density set to {0.95}:

The same scene with density reduced to {0.15}:

See also: color

Definition at line 154 of file qquick3dfog.cpp.

◆ densityChanged

void QQuick3DFog::densityChanged ( )

signal

Referenced by setDensity().

Here is the caller graph for this function:

◆ depthCurve()

float QQuick3DFog::depthCurve ( ) const

\qmlproperty float Fog::depthCurve

The default value is 1.0.

Applicable only when depthEnabled is set to true.

See also: depthEnabled

Definition at line 284 of file qquick3dfog.cpp.

◆ depthCurveChanged

void QQuick3DFog::depthCurveChanged ( )

signal

Referenced by setDepthCurve().

Here is the caller graph for this function:

◆ depthEnabledChanged

void QQuick3DFog::depthEnabledChanged ( )

signal

Referenced by setDepthEnabled().

Here is the caller graph for this function:

◆ depthFar()

float QQuick3DFog::depthFar ( ) const

\qmlproperty float Fog::depthFar

Ending distance from the camera. The default value is 1000.0. Applicable only when depthEnabled is set to true.

Note: The scene, including the camera and the models, are expected to be set up accordingly, so that sensible ranges can be defined by properties such as depthNear and depthFar. Do not expect that fog can always be enabled on a scene containing assets imported as-is, without tuning the transforms first. For example, the example screenshots on this page with the \l{https://github.com/KhronosGroup/glTF-Sample-Models/tree/master/2.0/Sponza}{Sponza} model are generated after manually applying an additional scale of {(100, 100, 100)} on the instantiated Sponza component that was generated by the balsam tool from the glTF source asset. This then gave a sufficient Z range to get good looking results by tuning the depthNear and depthFar values.

See also: depthNear, depthEnabled

Definition at line 259 of file qquick3dfog.cpp.

◆ depthFarChanged

void QQuick3DFog::depthFarChanged ( )

signal

Referenced by setDepthFar().

Here is the caller graph for this function:

◆ depthNear()

float QQuick3DFog::depthNear ( ) const

\qmlproperty float Fog::depthNear

Starting distance from the camera. The default value is 10.0. Applicable only when depthEnabled is set to true.

As an example, take this scene, first with a higher depthNear value.

Decreasing the value of depthNear results in the fog effectively "moving closer" to the camera as it now starts from a smaller distance from the camera:

Note: The scene, including the camera and the models, are expected to be set up accordingly, so that sensible ranges can be defined by properties such as depthNear and depthFar. Do not expect that fog can always be enabled on a scene containing assets imported as-is, without tuning the transforms first. For example, the example screenshots on this page with the \l{https://github.com/KhronosGroup/glTF-Sample-Models/tree/master/2.0/Sponza}{Sponza} model are generated after manually applying an additional scale of {(100, 100, 100)} on the instantiated Sponza component that was generated by the balsam tool from the glTF source asset. This then gave a sufficient Z range to get good looking results by tuning the depthNear and depthFar values.

See also: depthFar, depthEnabled

Definition at line 223 of file qquick3dfog.cpp.

◆ depthNearChanged

void QQuick3DFog::depthNearChanged ( )

signal

Referenced by setDepthNear().

Here is the caller graph for this function:

◆ enabledChanged

void QQuick3DFog::enabledChanged ( )

signal

Referenced by setEnabled().

Here is the caller graph for this function:

◆ heightCurve()

float QQuick3DFog::heightCurve ( ) const

\qmlproperty float Fog::heightCurve

Specifies the intensity of the height fog. The default value is 1.0. Applicable only when heightEnabled is set to true.

See also: heightEnabled

Definition at line 424 of file qquick3dfog.cpp.

◆ heightCurveChanged

void QQuick3DFog::heightCurveChanged ( )

signal

Referenced by setHeightCurve().

Here is the caller graph for this function:

◆ heightEnabledChanged

void QQuick3DFog::heightEnabledChanged ( )

signal

Referenced by setHeightEnabled().

Here is the caller graph for this function:

◆ isDepthEnabled()

bool QQuick3DFog::isDepthEnabled ( ) const

\qmlproperty bool Fog::depthEnabled

Controls if the fog appears in the distance. The default value is false.

See also: heightEnabled, enabled, depthNear, depthFar, depthCurve

Definition at line 177 of file qquick3dfog.cpp.

Referenced by QQuick3DRenderLayerHelpers::updateLayerNodeHelper().

Here is the caller graph for this function:

◆ isEnabled()

QT_BEGIN_NAMESPACE bool QQuick3DFog::isEnabled ( ) const

\qmltype Fog \inherits Object \inqmlmodule QtQuick3D

Specifies fog settings for a scene.

Since: 6.5

When the \l{QQuick3DSceneEnvironment::fog}{fog} property of a \l SceneEnvironment is set to a valid Fog object, the properties are used to configure the rendering of fog.

The simple fog provided by this type is implemented by the materials. It is not a post-processing effect, meaning it does not involve additional render passes processing the texture with the output of the \l View3D, but is rather implemented in the fragment shader for each renderable object (submesh of \l Model) with a \l PrincipledMaterial or shaded \l CustomMaterial.

Fog is configured by a number of properties:

\list

General settings: \l color and \l density

Depth fog settings: \l depthEnabled, \l depthNear, \l depthFar, \l depthCurve

Height fog settings: \l heightEnabled, \l leastIntenseY, \l mostIntenseY, \l heightCurve

Color transmission settings: \l transmitEnabled, \l transmitCurve

\endlist

For example, the following snippet enables depth (but not height) fog using the default fog parameters:

\qml environment: SceneEnvironment { backgroundMode: SceneEnvironment.Color clearColor: theFog.color fog: Fog { id: theFog enabled: true depthEnabled: true } } \endqml

Instead of defining the Fog object inline, it is also possible to reference a Fog object by id. And since \l ExtendedSceneEnvironment inherits everything from its parent type \l SceneEnvironment, fog can be used with \l ExtendedSceneEnvironment as well:

\qml Fog { id: theFog enabled: true depthEnabled: true } environment: ExtendedSceneEnvironment { fog: theFog } \endqml

See also: {Qt Quick 3D - Simple Fog Example}, {Qt Quick 3D - Scene Effects Example}

\qmlproperty bool Fog::enabled

Controls whether fog is applied to the scene. The default value is false.

Enabling depth or height fog has no effect without setting this value to true.

See also: depthEnabled, heightEnabled

Definition at line 87 of file qquick3dfog.cpp.

Referenced by QQuick3DRenderLayerHelpers::updateLayerNodeHelper().

Here is the caller graph for this function:

◆ isHeightEnabled()

bool QQuick3DFog::isHeightEnabled ( ) const

\qmlproperty bool Fog::heightEnabled

Controls if a height fog is enabled. The default value is false.

See also: depthEnabled, enabled, leastIntenseY, mostIntenseY, heightCurve

Definition at line 307 of file qquick3dfog.cpp.

Referenced by QQuick3DRenderLayerHelpers::updateLayerNodeHelper().

Here is the caller graph for this function:

◆ isTransmitEnabled()

bool QQuick3DFog::isTransmitEnabled ( ) const

\qmlproperty bool Fog::transmitEnabled

Controls if the fog has a light transmission effect. The default value is false.

Definition at line 446 of file qquick3dfog.cpp.

Referenced by QQuick3DRenderLayerHelpers::updateLayerNodeHelper().

Here is the caller graph for this function:

◆ leastIntenseY()

float QQuick3DFog::leastIntenseY ( ) const

\qmlproperty float Fog::leastIntenseY

Specifies the position (Y coordinate) where the fog is the least intense. The default value is 10.0. Applicable only when heightEnabled is set to true.

Note: By default the value is larger than mostIntenseY. As long as this is true, the fog is rendered top to bottom. When this value is smaller than mostIntenseY, the fog will render bottom to top.; The Y axis points upwards in Qt Quick 3D scenes.

Pictured here is a scene with height fog enabled (no depth fog), and leastIntenseY set to a value so the fog is only spreading around the bottom of the Sponza scene.

Increasing the value of leastIntenseY makes the fog spread higher since it now effectively starts at a higher Y position in the scene. (remember that the Y axis points upwards)

Note: As with depth fog, the scene is expected to be set up accordingly, so that sensible Y coordinate ranges can be defined by leastIntenseY and mostIntenseY. Do not expect that fog can always be enabled on a scene containing assets imported as-is, without tuning the transforms first. For example, the example screenshots on this page with the \l{https://github.com/KhronosGroup/glTF-Sample-Models/tree/master/2.0/Sponza}{Sponza} model are generated after manually applying an additional scale of {(100, 100, 100)} on the instantiated Sponza component that was generated by the balsam tool from the glTF source asset.

See also: mostIntenseY, heightEnabled

Definition at line 360 of file qquick3dfog.cpp.

◆ leastIntenseYChanged

void QQuick3DFog::leastIntenseYChanged ( )

signal

Referenced by setLeastIntenseY().

Here is the caller graph for this function:

◆ mostIntenseY()

float QQuick3DFog::mostIntenseY ( ) const

\qmlproperty float Fog::mostIntenseY

Specifies the position (Y coordinate) where the fog is the most intense. The default value is 0. Applicable only when heightEnabled is set to true.

Note: By default the value is smaller than leastIntenseY. As long as this is true, the fog is rendered top to bottom. When this value is larger than leastIntenseY, the fog will render bottom to top.; The Y axis points upwards in Qt Quick 3D scenes.; As with depth fog, the scene is expected to be set up accordingly, so that sensible Y coordinate ranges can be defined by leastIntenseY and mostIntenseY. Do not expect that fog can always be enabled on a scene containing assets imported as-is, without tuning the transforms first. For example, the example screenshots on this page with the \l{https://github.com/KhronosGroup/glTF-Sample-Models/tree/master/2.0/Sponza}{Sponza} model are generated after manually applying an additional scale of {(100, 100, 100)} on the instantiated Sponza component that was generated by the balsam tool from the glTF source asset.

See also: leastIntenseY, heightEnabled

Definition at line 400 of file qquick3dfog.cpp.

◆ mostIntenseYChanged

void QQuick3DFog::mostIntenseYChanged ( )

signal

Referenced by setMostIntenseY().

Here is the caller graph for this function:

◆ setColor

void QQuick3DFog::setColor ( const QColor & newColor )

slot

Definition at line 121 of file qquick3dfog.cpp.

References changed(), colorChanged(), and emit.

Here is the call graph for this function:

◆ setDensity

void QQuick3DFog::setDensity ( float newDensity )

slot

Definition at line 159 of file qquick3dfog.cpp.

References changed(), densityChanged(), emit, and qFuzzyCompare().

Here is the call graph for this function:

◆ setDepthCurve

void QQuick3DFog::setDepthCurve ( float newDepthCurve )

slot

Definition at line 289 of file qquick3dfog.cpp.

References changed(), depthCurveChanged(), emit, and qFuzzyCompare().

Here is the call graph for this function:

◆ setDepthEnabled

void QQuick3DFog::setDepthEnabled ( bool newDepthEnabled )

slot

Definition at line 182 of file qquick3dfog.cpp.

References changed(), depthEnabledChanged(), and emit.

Here is the call graph for this function:

◆ setDepthFar

void QQuick3DFog::setDepthFar ( float newDepthFar )

slot

Definition at line 264 of file qquick3dfog.cpp.

References changed(), depthFarChanged(), emit, and qFuzzyCompare().

Here is the call graph for this function:

◆ setDepthNear

void QQuick3DFog::setDepthNear ( float newDepthNear )

slot

Definition at line 228 of file qquick3dfog.cpp.

References changed(), depthNearChanged(), emit, and qFuzzyCompare().

Here is the call graph for this function:

◆ setEnabled

void QQuick3DFog::setEnabled ( bool newEnabled )

slot

Definition at line 92 of file qquick3dfog.cpp.

References changed(), emit, and enabledChanged().

Here is the call graph for this function:

◆ setHeightCurve

void QQuick3DFog::setHeightCurve ( float newHeightCurve )

slot

Definition at line 429 of file qquick3dfog.cpp.

References changed(), emit, heightCurveChanged(), and qFuzzyCompare().

Here is the call graph for this function:

◆ setHeightEnabled

void QQuick3DFog::setHeightEnabled ( bool newHeightEnabled )

slot

Definition at line 312 of file qquick3dfog.cpp.

References changed(), emit, and heightEnabledChanged().

Here is the call graph for this function:

◆ setLeastIntenseY

void QQuick3DFog::setLeastIntenseY ( float newleastIntenseY )

slot

Definition at line 365 of file qquick3dfog.cpp.

References changed(), emit, leastIntenseYChanged(), and qFuzzyCompare().

Here is the call graph for this function:

◆ setMostIntenseY

void QQuick3DFog::setMostIntenseY ( float newmostIntenseY )

slot

Definition at line 405 of file qquick3dfog.cpp.

References changed(), emit, mostIntenseYChanged(), and qFuzzyCompare().

Here is the call graph for this function:

◆ setTransmitCurve

void QQuick3DFog::setTransmitCurve ( float newTransmitCurve )

slot

Definition at line 473 of file qquick3dfog.cpp.

References changed(), emit, qFuzzyCompare(), and transmitCurveChanged().

Here is the call graph for this function:

◆ setTransmitEnabled

void QQuick3DFog::setTransmitEnabled ( bool newTransmitEnabled )

slot

Definition at line 451 of file qquick3dfog.cpp.

References changed(), emit, and transmitEnabledChanged().

Here is the call graph for this function:

◆ transmitCurve()

float QQuick3DFog::transmitCurve ( ) const

\qmlproperty float Fog::transmitCurve

Intensity of the light transmission effect. The default value is 1.0. Applicable only when transmitEnabled is set to true.

Definition at line 468 of file qquick3dfog.cpp.

◆ transmitCurveChanged

void QQuick3DFog::transmitCurveChanged ( )

signal

Referenced by setTransmitCurve().

Here is the caller graph for this function:

◆ transmitEnabledChanged

void QQuick3DFog::transmitEnabledChanged ( )

signal

Referenced by setTransmitEnabled().

Here is the caller graph for this function:

Property Documentation

◆ color

QColor QQuick3DFog::color

readwrite

Definition at line 27 of file qquick3dfog_p.h.

Referenced by QQuick3DRenderLayerHelpers::updateLayerNodeHelper().

◆ density

float QQuick3DFog::density

readwrite

Definition at line 28 of file qquick3dfog_p.h.

Referenced by QQuick3DRenderLayerHelpers::updateLayerNodeHelper().

◆ depthCurve

float QQuick3DFog::depthCurve

readwrite

Definition at line 32 of file qquick3dfog_p.h.

Referenced by QQuick3DRenderLayerHelpers::updateLayerNodeHelper().

◆ depthEnabled

bool QQuick3DFog::depthEnabled

readwrite

Definition at line 29 of file qquick3dfog_p.h.

◆ depthFar

float QQuick3DFog::depthFar

readwrite

Definition at line 31 of file qquick3dfog_p.h.

Referenced by QQuick3DRenderLayerHelpers::updateLayerNodeHelper().

◆ depthNear

float QQuick3DFog::depthNear

readwrite

Definition at line 30 of file qquick3dfog_p.h.

Referenced by QQuick3DRenderLayerHelpers::updateLayerNodeHelper().

◆ enabled

bool QQuick3DFog::enabled

readwrite

Definition at line 26 of file qquick3dfog_p.h.

◆ heightCurve

float QQuick3DFog::heightCurve

readwrite

Definition at line 36 of file qquick3dfog_p.h.

Referenced by QQuick3DRenderLayerHelpers::updateLayerNodeHelper().

◆ heightEnabled

bool QQuick3DFog::heightEnabled

readwrite

Definition at line 33 of file qquick3dfog_p.h.

◆ leastIntenseY

float QQuick3DFog::leastIntenseY

readwrite

Definition at line 34 of file qquick3dfog_p.h.

Referenced by QQuick3DRenderLayerHelpers::updateLayerNodeHelper().

◆ mostIntenseY

float QQuick3DFog::mostIntenseY

readwrite

Definition at line 35 of file qquick3dfog_p.h.

Referenced by QQuick3DRenderLayerHelpers::updateLayerNodeHelper().

◆ transmitCurve

float QQuick3DFog::transmitCurve

readwrite

Definition at line 38 of file qquick3dfog_p.h.

Referenced by QQuick3DRenderLayerHelpers::updateLayerNodeHelper().

◆ transmitEnabled

bool QQuick3DFog::transmitEnabled

readwrite

Definition at line 37 of file qquick3dfog_p.h.

The documentation for this class was generated from the following files:

qtquick3d/src/quick3d/qquick3dfog_p.h (08717109aa2128e4b510b6a9580aedef99228cbc)
qtquick3d/src/quick3d/qquick3dfog.cpp (be3b9c6ab4f79441c597e2f86d7fff35b1c96cb8)

Public Slots

Signals

Public Member Functions

Properties

Additional Inherited Members

Detailed Description

Member Function Documentation

◆ changed

◆ color()

◆ colorChanged

◆ density()

◆ densityChanged

◆ depthCurve()

◆ depthCurveChanged

◆ depthEnabledChanged

◆ depthFar()

◆ depthFarChanged

◆ depthNear()

◆ depthNearChanged

◆ enabledChanged

◆ heightCurve()

◆ heightCurveChanged

◆ heightEnabledChanged

◆ isDepthEnabled()

◆ isEnabled()

◆ isHeightEnabled()

◆ isTransmitEnabled()

◆ leastIntenseY()

◆ leastIntenseYChanged

◆ mostIntenseY()

◆ mostIntenseYChanged

◆ setColor

◆ setDensity

◆ setDepthCurve

◆ setDepthEnabled

◆ setDepthFar

◆ setDepthNear

◆ setEnabled

◆ setHeightCurve

◆ setHeightEnabled

◆ setLeastIntenseY

◆ setMostIntenseY

◆ setTransmitCurve

◆ setTransmitEnabled

◆ transmitCurve()

◆ transmitCurveChanged

◆ transmitEnabledChanged

Property Documentation

◆ color

◆ density

◆ depthCurve

◆ depthEnabled

◆ depthFar

◆ depthNear

◆ enabled

◆ heightCurve

◆ heightEnabled

◆ leastIntenseY

◆ mostIntenseY

◆ transmitCurve

◆ transmitEnabled